on 12-12-2006 5:56 AM
Hi Gurus,
We have Win 2003, MaxDB in NW2004s with BI-ABAP+Java.
When we tried to start SAP via MMC, disp+work in Yellow flag . Can anyone tell how to move forward.
Please find error below:
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 01
sid BI1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 3684
Tue Dec 12 13:51:40 2006
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3684) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Dec 12 13:51:45 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ootspdbs01_BI1_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 060B0040, size: 4607512)
DpShMCreate: allocated sys_adm at 060B0040
DpShMCreate: allocated wp_adm at 060B1E28
DpShMCreate: allocated tm_adm_list at 060B4FA8
DpShMCreate: allocated tm_adm at 060B4FD8
DpShMCreate: allocated wp_ca_adm at 0647A570
DpShMCreate: allocated appc_ca_adm at 06480330
DpShMCreate: allocated comm_adm at 06482270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06503130
DpShMCreate: allocated gw_adm at 06503170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 065031A0
DpShMCreate: allocated wall_adm at 065031A8
Tue Dec 12 13:51:46 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 900
argv[0] = E:\usr\sap\BI1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\BI1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\BI1\SYS\profile\BI1_DVEBMGS01_ootspdbs01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1042
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BI1
argv[7] = -DSAPMYNAME=ootspdbs01_BI1_01
argv[8] = -DSAPPROFILE=E:\usr\sap\BI1\SYS\profile\BI1_DVEBMGS01_ootspdbs01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( ootspdbs01) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >ootspdbs01_BI1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Hi Natayanan,
Can you paste here the out of dev_server0 file.
Also dev_server.out file.
Regards,
Tushar Chavan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Narayanan,
Did you ever find an answer to this? I am having the exact same problem.
Thanks!
Heather
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Narayanan,
1. You posted the question at MaxDB/liveCache forum, but
from the given information, it's not clear, if you have
any errors/problem in your database.
Lets go & check first, if you have any errors in the database
logs and the database is running, check if there are NO LOG_FULL
or DB_FULL issues.
-> Please update with output of the following commands, run on the
database server:
sdbregview -l
dbmcli -s inst_enum
dbmcli -s db_enum
dbmcli -d <DB-name> -u <dbm-user>,<pwd> db_state
dbmcli -d <DB-name> -u <dbm-user>,<pwd> show active
-> Please check errors in the current knldiag, knldiag.err & dbm.prt
files located in the Rundirectory on the database server.
2. You wrote, that 'disp+work in Yellow flag'.
Did you check the WP dev log on the application server?
Please review the logs stderr, sapstart.log, dev_ms, dev_w ...
and check the error messages.
Thank you and best regards, Natalia Khlopina
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Narayanan,
-> As I wrote, please update with output of the following commands, run on the
database server:
sdbregview -l
< to list the database software packages installed on the server>
dbmcli -s inst_enum
< To display a list of all registered versions of the database
software. >
dbmcli -s db_enum
< to display a list of all registered database instances on the server. >
=> For example on my PC ( <DB-name> = J2E 😞
dbmcli db_enum
OK
J2E C:\SAPDB\J2E\DB 7.5.0.7 slow offline
J2E C:\SAPDB\J2E\DB 7.5.0.7 quick offline
J2E C:\SAPDB\J2E\DB 7.5.0.7 fast offline
<DB-name><dependent_path><database_version><kernel_version><operational_state>
******
Please see the documents/information at http://dev.mysql.com/doc/maxdb
If you are SAP customer, please review the FAQ notes listed at
/thread/81856 [original link is broken]
Regards, Natalia khlopina
- > sdbregview -l
<<< OUTPUT >>>
Server Utilities c:/program files/sdb/programs 7.6.00.18 32 bit valid
DB Analyzer c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7300 c:/program files/sdb/programs 7.3.00.54 valid
Base c:/program files/sdb/programs 7.6.00.18 32 bit valid
Redist Python c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7301 c:/program files/sdb/programs 7.3.01.19 valid
JDBC c:/program files/sdb/programs 7.6.00.16 valid
Messages c:/program files/sdb/programs MSG 0.3017 valid
ODBC c:/program files/sdb/programs 7.6.00.18 32 bit valid
Database Kernel c:/program files/sdb/7600 7.6.00.18 32 bit valid
Database Kernel e:/sapdb/bi1/db 7.6.00.18 32 bit valid
Loader c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7104 c:/program files/sdb/programs 7.1.04.45 valid
SQLDBC c:/program files/sdb/programs 7.6.00.18 32 bit valid
Webtools c:/program files/sdb/programs/web 7.6.00.18 32 bit valid
SQLDBC 7600 c:/program files/sdb/programs 7.6.00.18 32 bit valid
PCR 7403 c:/program files/sdb/programs 7.4.03.40 32 bit valid
-> dbmcli -s inst_enum
<<< OUTPUT >>>
OK
7.6.00.18 e:\sapdb\bi1\db
7.6.00.18 c:\program files\sdb\7600
-> dbmcli -s db_enum
<<< OUTPUT >>>
OK
BI1 e:\sapdb\bi1\db 7.6.00.18 slow offline
BI1 e:\sapdb\bi1\db 7.6.00.18 fast running
Also, let me know how to find out user ID & Password of DBM.
A)
Database System Administrator User -
SUPERDBA ( default password - admin)
Please run:
dbmcli -d BI1 -u superdba,admin db_state
B)
If you will have the success to run the A) command =>
dbmcli -d BI1 -u superdba,admin
<enter>
dbmcli on BI1>user_getall
dbmcli on BI1>sql_connect superdba,admin
dbmcli on BI1>sql_execute select * from users
< update with output >
dbmcli on BI1>sql_release
dbmcli on BI1>exit
C) logon as bi1adm & run:
xuser list
< update with output >
Hi,
Able to run on "control" user. Find the details below for the following:
-> Please update with output of the following commands, run on the
database server:
sdbregview -l (already given)
dbmcli -s inst_enum (already given)
dbmcli -s db_enum(already given)
~~ dbmcli -d <DB-name> -u <dbm-user>,<pwd> db_state
<<<Output>>>
OK
State
ONLINE
~~dbmcli -d <DB-name> -u <dbm-user>,<pwd> show active
<<<Output>>>
OK
SERVERDB: BI1
ID UKT Win TASK APPL Current Timeout Region Wait
tid type pid state priority cnt try item
For Step 2, We shall review it and come back to soon. Meanwhile, kindly let us know if you have any work around.
thank you.
Hello Narayanan,
1. Concerning the xuser tool please review the SAP note 39439.
-> Did you check the errors in the knldiag.err & knldiag files?
2. You wrote: "For Step 2, We shall review it and come back to soon."
Did you check the application logs & did you see any errors?
3. So far I didn't see any errors in the posted "dev_disp" & another
information from the database provided by you => What kind of the
workaround you asked for? To give you the workaround I need to know,
what errors/problems did you get.
Please check the system, logs & update with additional information.
Do you have the problems with the database or the communication to
the database?
4. You wrote "When we tried to start SAP via MMC, disp+work in Yellow flag".
When you will start the system in SAPMMC , then refresh the status of the
processes & review the results => disp+work process status could be, for
example:
green - running ... OK
yellow - Running but dialog Queue stand still
red - Could not be started ...
-> What is in your case? Was you able to logon to your system?
Thank you & best regards, Natalia Khlopina
Hi Techie Gurus,
We're still facing the problem, to be precise:
1) In MMC Console, We are trying to start the SAP System and it started but few.
2) In Process List of SAP MMC & SID:
- Msg_server.exe(Green) with status as "running"
- disp+work.exe(Yellow) with status as "running, Message Server connection ok, Dialog Queue time 0.00 sec, J2EE: Some process running
- igswd.exe(Green) with status as "Running".
3) J2EE Process Table:
- SDM(Green); pid(3904) with Status as "RUnning" & Debug as "Switched off"
- dispatcher(Green); pid(3092) with status as "Running" & Debug as "Disabled"
- server0(Grey); pid(0) with status as "stopped" & debug as "Disabled"; Exitcode (-11113)
Background:
We have created J2EE_Guest in SAP back end which is working find. Visual Administrator is not working and suddently port got changed to some 8000. Also tried to check telnet for 3900 which also held by another port( we think). Hope this background info helps.
Appreciate help from tech gurus asap.
thank you in advance.
User | Count |
---|---|
98 | |
11 | |
11 | |
10 | |
10 | |
8 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.