on 02-21-2012 10:21 PM
Hello,
please advise me at following problem :
System : NW 7.0 AS JAVA, AS ABAP at same host
Task : Implementing JCO destination in context to setup of BI - integrated modeller
inside Web Dynpro Administrator ( ( check of SLD connection successfull ) :
ex. setup JCO destination : BI_Metadataa --> Configuration is accepted --> green light
b) Test of it fails with error messagen jco.JCO$Exception (102 ) RFC error communcation Connect to message server host
failed ...Group Public not found
I checked with guiidelines of :
http://wiki.sdn.sap.com/wiki/display/EP/TroubleshootingSAPJavaConnector%28JCo%29 // case 3
means I checked existence of group "public" at Backend ( = AS ABAP ) as well as on message server - they are existing
How should I proceed ?
Regards,
Oskar
Regards,
Oskar
Thanks gentleman, problem is solved
Adding appropriate portal role to appropriate
user brought up menu "Business Planing" at
portal
Regards,
Oskar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I replaced "SAPLogonTicketKeypair" - was not
valid at timeframe.
Now Netweaver Administratror, deploy & change does not tell any error
as well as log. And "test" and "ping" of all four JCO destinastion
necessary for Bi integrated modeller are error free.
Anyway at
http:// / Irj /portal
doesn´t show a menue for Bi integrated modeller.
Was it right to put into domain name "."
while executing Netweaver Administrator,
Deploy & change ????
Please advise me
Regards,
oskar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I must admit : Deploy wizard asks " ....specifiy full domain name of the application server ... without host
name....."
Because I have no domain ( its an IDES one host system with AS JAVA and AS ABAP ) what is correct
inpurt here ? Should I create an DNS alias ?
Regards,
Oskar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Nirmal,
thanks for your answer . There was indeed a positive change.
4 JCO destinations BI_Metadata, BI_Modelldata,WD_ALV_Metadata_DEST
and WD_ALV_Modelldata_Dest are created successfully
Now the following appears ( inside administrator, WebDynpro ) :
A ping to all four destinations is done successfully.
A "test" is successfull to BI_Metadata and to ALV_Metadata_Dest.
But "test" with BI_Modelldata and ALV_Modelldata fails with message
jco. JCO$Exception (103 ) RFC_ERROR_LOGON_Failure : unable to interpret
SSO ticket received.
But SSO ticket was defined by me at default template as recommended by
wizzard
login/create_sso2_ticket=2
login/accept_sso2_ticket=1
I have an additional question which could be important
At Deploy wizzard there is asked as Input for starting
wizzard fully quallifed Domain name
If I make input :
serv1.
this should be enough ?
My system is a AS JAVA and AS ABAP at
one host with no domain.
Please advise me
Regards,
Oskar
Edited by: Oskar Indlekofer on Feb 26, 2012 8:57 AM
Edited by: Oskar Indlekofer on Feb 26, 2012 12:22 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Nirmal,
thanks for your answer.
I was there in < host > : < port > / irj/ portal but no tab which
you mentioned.
As consequence I went back to Web Dynpro Administrator
and tested that four JCo destination necessary for BI Modeller
ex BI_Metadate etc.
I detected inspite of error free running Deploy Wizard of BI Java
that four JCO destinations "are not working" and even there is a green
light behind destination
error message of JCO test is :
com.samp.nw.JCO$Exception (102 ) RFC_error_communication ..connect to message server host failed ..
... connect _pm Type B MS host group Public not found ...
Is problem caused by Group "Public" ?
Please advice ...
Regards,
oskar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Bilgen,
first thanks for your advise.
I got my system running about 1 hr before your email
doing exactly what you described. Setting of login/sso
etc. and restart of server allowed to get wiizzard, Deployment
of BI Java running. RFC , jco destinations for BI integrated modeller
etc. are properly set - no error reportet while running wizzard,
deployment BI Java
I have a question - may be you can help me.
I want to use BI integrated modeller. If I put
in into Browser : http: // < serv > : < port > /irj
I get many portal menues but not what I need
menue of "Bi integrated modeller"
Do I still have to setup some other things - additional
to BI deployment with wizzard
Please advise me
Regards,
Oskar
Regards,
Oskar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
thanks for your reply. I have already red note "Setting up BEX WEB" some
days ago - but that doesn´t help in my case.
I have not netweaver 2004s system I have NW 7.0 and the
only problem is to setup correctly sso ticket so that I fullfill
prerequisite for starting : Wizard, "deploy and change", BI
One prerequisite for starting : Wizzard , Deploy and change, BI is
SSO ticket
as mentioned by SAP Note 983156 - BI configuration w. Template Installer.
excerpt :
To allow SSO for the AS-ABAP (BI) system, the following profile parameters
in the "default" profile have to been set:
login/create_sso2_ticket=2
login/accept_sso2_ticket=1
Procedure:
Login to AS-ABAP -> Start TA /rz10 -> Menue: Utilities -> Import profiles
-> Of all active servers
Profile: -> Select: Default -> Mark: Extended Maintenance -> Change
Add the both parameter
-> Save and Activate the profile -> Restart the system
If I add parameters to profile Default.xxx as mentioned above with rz10
then I see online parameter added to Default. But checking it directly with
an editor at location there is no change. After restart of server
and trying to start wizzard "Deploy and change" same complain , means
missing tickets..
I have seen at someother notes with subject "SSO" that they do
setup of RFC connection and exchange of certificates which are not
mentioned in note 983156 ( = prerequisites for starting Wiizard ). What is now necessary
at NW 7.0 ? Put in of parameter login ...into default.xx and restart of server or additional things ?
Regards,
Oskar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Oskar,
First, NetWeaver 2004s = NetWeaver 7.0 (just SAP's name change)
Secondly, can you please follow the steps below to add the profile parameters on BW ABAP System:
1. Start Transaction RZ10
2. Execute Utilities > Import profiles > of active servers menu step
3. Select the Instance Profile from Profiles and select Extended maintenance and press change
4. There, select menu step Parameter > Create or just press F5
5. Put the parameter login/create_sso2_ticket in the Parameter field and 2 in the parameter value field.
6. Press "Copy"
7. Then turn back
8. Do the steps 4,5,6,7 for the login/accept_sso2_ticket parameter but keep in mind to set the value to 1
9. Then Press the "Copy" in the Parameter list again which will take you to the RZ10 main screen
10. There, click the Save button and when it asks you to activate the profile, click Yes. If any "inconsistent profile parameters found" like popup displayed just ignore it.
11. Restart your BW System
Know check that the profile parameters are active with the following method.
1. Start transaction SE38
2. Execute report RSUSR003 (Press F8 2 times)
There you'll see the values for the parameters.
Regards
My requirement is to set up four JCO destinations BI.... required for application " Bi Iintegrated
Planning"
I try2 ways
a) within Webdynpro Administrator I try to do establish JCO destinations
required four BI integrated modeller which ends with error message JCO exception as described
b) configuration wizzard of NWA ( Deploy and Change, configuratiojn task, BI Java )
here the configuration stops because of problem with SSO tickets. I set the parameters
login/create_sso.. and login/accept_sso.. in default profile of AS ABAP (sap note 983156 )
but when I repeat configuration wizzard of NWA it stll complains that SSO tickets are not possible
and parameters should be set as I have done. I also detected that this parameters aren´t there
after restart of server and those parameters are not in the available set for parameters for default
profile .... ?
Please advise me
Regards,
Oskar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Oskar,
Try to configure SSO between your BW java stack and BW ABAP system.
Once this is configured create the JCo using the ticket authentication method and it will work fine for you.
Make sure that the "PUBLIC" logon group is active in your backend system.
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 22, 2012 1:02 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
89 | |
10 | |
9 | |
9 | |
9 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.