cancel
Showing results for 
Search instead for 
Did you mean: 

Development Server Issue ..

Former Member
0 Kudos

Hello.

Could anyone please help me with that .. i am having some issue with the development ERP 6 EHP 5. actually i have installed DEV system already .. situation is when i RUN SGEN in the post installation steps. it will run for a while then just nothing and hangup ..

i did the installation twice, but same problem please please help me with that...

i am posting dev_disp log detail,

-


trc file: "dev_disp.new", trc level: 1, release: "720"

-


sysno 00

sid DEV

systemid 390 (AMD/Intel x86_64 with Linux)

relno 7200

patchlevel 0

patchno 46

intno 20020600

make single threaded, Unicode, 64 bit, optimized

profile /usr/sap/DEV/SYS/profile/DEV_DVEBMGS00_haidridev

pid 8524

Mon Feb 6 15:03:58 2012

kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)

length of sys_adm_ext is 588 bytes

      • SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 8524) [dpxxdisp.c 1252]

shared lib "dw_xml.so" version 46 successfully loaded

shared lib "dw_xtc.so" version 46 successfully loaded

shared lib "dw_stl.so" version 46 successfully loaded

shared lib "dw_gui.so" version 46 successfully loaded

shared lib "dw_mdm.so" version 46 successfully loaded

shared lib "dw_rndrt.so" version 46 successfully loaded

shared lib "dw_abp.so" version 46 successfully loaded

shared lib "dw_sym.so" version 46 successfully loaded

shared lib "dw_aci.so" version 46 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3900

rdisp/dynamic_wp_check : 1

rdisp/calculateLoadAverage : 1

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is active

DpIPCInit2: write dp-profile-values into sys_adm_ext

DpIPCInit2: start server >haidridev_DEV_00 <

DpShMCreate: sizeof(wp_adm) 43016 (2264)

DpShMCreate: sizeof(tm_adm) 5581368 (27768)

DpShMCreate: sizeof(wp_ca_adm) 80000 (80)

DpShMCreate: sizeof(appc_ca_adm) 80000 (80)

DpCommTableSize: max/headSize/ftSize/tableSize=500/8/576056/576064

DpShMCreate: sizeof(comm_adm) 576064 (1144)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/57400/90392/147840

DpShMCreate: sizeof(slock_adm) 147840 (104)

DpFileTableSize: max/headSize/ftSize/tableSize=3800/8/334456/334464

DpShMCreate: sizeof(file_adm) 334464 (80)

DpShMCreate: sizeof(vmc_adm) 43624 (2296)

DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: sizeof(j2ee_adm) 3928

DpShMCreate: SHM_DP_ADM_KEY (addr: 7fd8ce33b000, size: 6980944)

DpShMCreate: allocated sys_adm at 7fd8ce33b008

DpShMCreate: allocated wp_adm_list at 7fd8ce33e0e0

DpShMCreate: allocated wp_adm at 7fd8ce33e2c8

DpShMCreate: allocated tm_adm_list at 7fd8ce348ad8

DpShMCreate: allocated tm_adm at 7fd8ce348b20

DpShMCreate: allocated wp_ca_adm at 7fd8ce89b560

DpShMCreate: allocated appc_ca_adm at 7fd8ce8aede8

DpShMCreate: allocated comm_adm at 7fd8ce8c2670

DpShMCreate: allocated slock_adm at 7fd8ce94f0b8

DpShMCreate: allocated file_adm at 7fd8ce973240

DpShMCreate: allocated vmc_adm_list at 7fd8ce9c4cc8

DpShMCreate: allocated vmc_adm at 7fd8ce9c4d70

DpShMCreate: allocated gw_adm at 7fd8ce9cf7e0

DpShMCreate: allocated j2ee_adm at 7fd8ce9cf818

DpShMCreate: allocated ca_info at 7fd8ce9d0778

DpShMCreate: allocated wall_adm at 7fd8ce9d0790

DpCommAttachTable: attached comm table (header=7fd8ce8c2670/ft=7fd8ce8c2678)

DpSysAdmIntInit: initialize sys_adm

rdisp/test_roll : roll strategy is DP_NORMAL_ROLL

dia token check not active (10 token)

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpFileInitTable: init table for 3800 entries

DpSesCreateTable: created session table at 7fd8ca2f7000 (len=158096)

DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm

rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 4096 kByte.

Using implementation std

EsStdUnamFileMapInit: ES base = 0x7fd7c80f6000

EsStdInit: Extended Memory 4096 MB allocated

Linux: Kernel supports shared memory disclaiming

Linux: using madvise(<pointer>, <size>, 9).

Linux: disclaiming for shared memory enabled

<ES> 1023 blocks reserved for free list.

ES initialized.

DpVmcSetActive: set vmc state DP_VMC_ENABLED

DpVmcSetActive: set vmc state DP_VMC_ACTIVE

DpVmcInit2: o.k.

MPI: dynamic quotas disabled.

MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1638]

***LOG Q0K=> DpMsAttach, mscon ( haidridev) [dpxxdisp.c 12244]

MBUF state LOADING

DpStartStopMsg: send start message (myname is >haidridev_DEV_00 <)

DpStartStopMsg: start msg sent

      • WARNING: resource limit value for 'max open files' too low (1024 < 32800)

**START Linux Memory Parameter Check

virtual memory: hard-limit = UNLIMITED

virtual memory: soft-limit = UNLIMITED

core size: hard-limit = UNLIMITED

core size: soft-limit = 0 MB

data segment size: hard-limit = UNLIMITED

data segment size: soft-limit = UNLIMITED

stack size: hard-limit = UNLIMITED

stack size: soft-limit = 8 MB

max open files: hard-limit = 1024

max open files: soft-limit = 1024

Page Size: 4 KB

kernel.shmmax = 8796093022207 MB

kernel.shmall = 4503599627370495 MB

**END Linux Memory Parameter Check

CCMS uses Shared Memory Key 73 for monitoring.

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

CCMS: Initalized shared memory of size 60000000 for monitoring segment.

CCMS: Checking Downtime Configuration of Monitoring Segment.

CCMS: AlMsUpload called by wp 1024.

Mon Feb 6 15:03:59 2012

CCMS: AlMsUpload successful for /usr/sap/DEV/DVEBMGS00/log/ALMTTREE (3266 MTEs).

CCMS: start to initalize 3.X shared alert area (first segment).

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

DpWpBlksLow: max wp blocks in queue is 800 (80 %)

MBUF component UP

DpMsgProcess: 1 server in MBUF

DpAppcBlksLow: max appc blocks in queue is 500 (50 %)

Mon Feb 6 15:15:38 2012

***LOG Q0I=> NiIRead: P=192.168.10.50:49513; L=192.168.10.6:3200: recv (104: Connection reset by peer) [nixxi.cpp 5072]

      • ERROR => NiIRead: SiRecv failed for hdl 49/sock 19

(SI_ECONN_BROKEN/104; I4; ST; P=192.168.10.50:49513; L=192.168.10.6:3200) [nixxi.cpp 5072]

DpRTmPrepareReq: network error of client T20, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3

DpRTmPrepareReq: client address of T20 is 192.168.10.50(farhan-pc)

***LOG Q04=> DpRTmPrep, NiBufReceive (21 20 Farhan-PC ) [dpxxdisp.c 11926]

RM-T20, U21, , Farhan-PC, 15:05:08, M0, W-1, , 1/0

Accepted Solutions (0)

Answers (3)

Answers (3)

Former Member
0 Kudos

Also, ensure you have enough freespace in database.

Former Member
0 Kudos

thanks for a Swift Reply ..

RAM is 32 GB, i did give Swap of 20GB ...

and i am not running on VM .. i am running it on physical system ..

Regards

Omar

former_member188883
Active Contributor
0 Kudos

Hi Omkar,

I guess a problem with your PC and not the server.

Why don't you schedule SGEN in background and leave it apart. Monitor the same using SM37 at periodic intervals.

Regards,

Deepak Kori

sivakumar_kilari3
Active Contributor
0 Kudos

Hi,

Restart the system and try again,

Check your RAM and VM how much occupying while running SGEN.

how many work processing are occupying?

Thanks

Siva