12-27-2011 1:13 PM
Hi Gurus,
I want to calculate grade from assessments of module.
Example: The module has 4 assessments:
- Midterm 1 (%15) = 70
- Midterm 2 (%15) = 80
- Quiz (%10) = 1
- Final (%60) = 40
Scale of assessments is 0-100.
Scale of module is A-F.
Average grade = 37,585
But the system convert value to 0,00 which is lower limit. The grade fill as F note on module appraisal.
How can i convert 37,585 to C- module grade?
Value Scale Val. Std Value Lower limit
A 4 100.000,00 95.454,55
A- 3.7 95.454,54 86.363,64
B+ 3.3 86.363,63 77.272,73
B 3 77.272,72 68.181,82
B- 2.7 68.181,81 59.090,91
C+ 2.3 59.090,90 50.000,00
C 2 49.999,99 40.909,10
C- 1.7 40.909,09 31.818,19
D+ 1.3 31.818,18 22.727,28
D- 0.7 22.727,27 13.636,37
FD 0,4 13.636,36 4.545,46
F 0 4.545,45 0
Thanks.
12-28-2011 12:43 AM
Hello Treasureman,
In SAP you don't define different scale rather you define weighting. Appraiser will use same scale 0-100 but every assessment will have different weighting. System will calculate final grade using this weighting.
For example(As per you scale):
-Midterm1 = 46.67(C)
- Midterm 1 = 53.33(C+)
- Quiz = 10.00(F)
- Final = 66.67(
Calculated final ( 46.67 * .15 + 53.33 * 0.15 + 10.00 * 0.1 + 66.67 * 0.6 ) = 56.00( C+).
Thanks,
Prabhat Singh
01-05-2012 11:54 AM
Hi Prabhat,
your message can be missunderstanding. It is possible to create different scales for one module. With regard to your example
you may want to use for the Quiz a pass/failed scale.
Than the system would need to calculate on the basis of the system scale (0-100) the average grade including the the passed or failed grade and the grade A-E. Of course you also have to maintain the weighting. Without weighting system won't be able to calclulate as well.
Best Regards,
Silke
01-05-2012 12:18 PM
Hi Silke,
Yes, You are right.I didn't mean to say that. In evaluation info-type user can assign one scale(Default scale). But Appraiser/Instructor can also select the scale while grading. They can select different scale for different assessments(mid term/quiz/final).
Thanks a lot for correcting it.
Best Regards,
Prabhat Singh
12-28-2011 8:07 AM
Hello,
Problem solved by myself. We should define key figure to appraisal template at customizing.
After that system was able to calculated grade.
Thanks.