on 09-04-2006 12:56 PM
Hi,
Is it possible to change the tx.ssd filename to something else.
We have a problem with the WinGUI iView, because the workstations associates the .ssd ending with another application. Because of this, the portal asks if the user want's to save it as a file.
We are using EP6.0 SP17.
- Kristian
Hello Kristian,
Did you read blog http://chentiangemalc.wordpress.com/2011/03/29/case-of-the-sap-do-you-want-to-open-or-save-tx-sapssd... ?
BR,
Kamil
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
null
Edited by: Mitchi Haight on Sep 30, 2009 3:58 PM
Edited by: Mitchi Haight on Sep 30, 2009 3:59 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Everyone
The .ssd file extension entry should be associated with the SAP FrontEnd Logon Application so that when the Portal IView file tx.ssd is required to be opened, windows already knows that the .ssd file should be opened by the sapgui frontend logon application.
Usually the .ssd extension is NOT associated in Windows with any program so there is no ambiguity for Windows when opening this file because the IView contains the relevant information for opening.
Other programs may configure this .ssd extension for their own use, and when this occurs, the tx.ssd pop-up will occur because Windows will be asking whether you wish to open the file with the SAP Logon Application or just save the file because there is an ambiguity for Windows as to what to do with a file that is associated internally with the SAP Logon Application, but the .ssd file extension is NOT associated with the SAP Logon Application.
So we should associate the ".ssd" File Extension with the SAP FrontEnd Logon Application in the Registry Hive HKCR\.ssd\@="SapFront.App" in the following ways:
1. with the Registry (reg) command:
reg add "hkcr\.ssd" /ve /t REG_SZ /d SapFront.App /f
OR
2. from Explorer:
Open Explorer
Select Tools -> Folder Options... -> File Types
Select: New
Select: Advanced>>
File Extension: ssd
Associated File Type: SAP Logon Application
Select: OK
Select: OK
The Windows Registry entry will then look like this:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.ssd]
@="SapFront.App"
When SapGUI is installed, it set up the second part of this puzzle which allows the tx.ssd file to be opened.
The SapFront.App entry in HKCR is setup by sapgui to open the saplogon.exe program, which happens to be the SAP FrontEnd Logon Application.
The Windows Registry looks like this:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\SapFront.App]
"SapCreateKey"=dword:00000000
@="SAP Logon Application"
"EditFlags"=hex:00,00,01,00
[HKEY_CLASSES_ROOT\SapFront.App\CLSID]
"SapCreateKey"=dword:00000000
@="{83658045-6571-3232-7082-797884697869}"
[HKEY_CLASSES_ROOT\SapFront.App\DocObject]
"SapCreateKey"=dword:00000000
@="0"
[HKEY_CLASSES_ROOT\SapFront.App\Insertable]
"SapCreateKey"=dword:00000000
@=""
[HKEY_CLASSES_ROOT\SapFront.App\protocol]
"SapCreateKey"=dword:00000000
[HKEY_CLASSES_ROOT\SapFront.App\protocol\StdFileEditing]
"SapCreateKey"=dword:00000000
[HKEY_CLASSES_ROOT\SapFront.App\protocol\StdFileEditing\server]
"SapCreateKey"=dword:00000000
@="\"C:
Program Files
SAP
FrontEnd
Sapgui
saplogon.exe\""
[HKEY_CLASSES_ROOT\SapFront.App\protocol\StdFileEditing\verb]
"SapCreateKey"=dword:00000000
[HKEY_CLASSES_ROOT\SapFront.App\protocol\StdFileEditing\verb\0]
"SapCreateKey"=dword:00000000
@="&Edit"
If you have an association for the .ssd file type that you need to be other than the SAP logon Application, then change the SSD_URL_Postfix entry as shown below:
According to SAP Note Number 901949 - Popup for tx.ssd shows up on Windows XP SP2 or Windows2003
In EP6 SP2 you may also try this step:
-
6. Edit WinGuiRenderLayer.properties
Edit the file
/usr/sap/<SID>/j2ee/j2ee_XX/cluster/server/services/
servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/com.sap.port
al.appintegrator.sap/property/Transaction/WinGuiRenderLayer.properties
Change the line
SSD_URL_Postfix = /tx.ssd
to
SSD_URL_Postfix = /tx.sapssd
and save the file. Restart the portal.
Once this is done, you can then either leave the .sapssd file type unconfigured or you can configure it to point to the SAP Logon Application in the following ways:
1. with the Registry (reg) command:
reg add "hkcr\.sapssd" /ve /t REG_SZ /d SapFront.App /f
OR
2. from Explorer:
Open Explorer
Select Tools -> Folder Options... -> File Types
Select: New
Select: Advanced>>
File Extension: sapssd
Associated File Type: SAP Logon Application
Select: OK
Select: OK
Best Regards
Peta M Gergen
SAP Basis Administrator
KPMG
147 Collins Street
Melbourne VIC 3000 Australia
pgergen@kpmg.com.au
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Peta,
Sorry to bother you, but I have question on how to add in the reg add "hkcr\.sapssd" /ve /t REG_SZ /d SapFront.App /f
In the command: how should I type?
This quote from you:
"Once this is done, you can then either leave the .sapssd file type unconfigured or you can configure it to point to the SAP Logon Application in the following ways:
1. with the Registry (reg) command:
reg add "hkcr\.sapssd" /ve /t REG_SZ /d SapFront.App /f
Thanks again
David
Hi David
I have created a file for you to use repeatedly instead of just running the single command you are asking about.
Save the following 5 lines :
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.sapssd]
@="SapFront.App"
[HKEY_CLASSES_ROOT\.ssd]
@="SapFront.App"
to a Windows Registry file called Set_SapGui_FileAssosciations.reg
1. You can then run this file anytime by double-clicking it with the mouse
or
2. you can call it from the command prompt (Start->Run->cmd) by using
reg import Set_SapGui_FileAssosciations.reg
Best Regards
Peta Gergen
Hi Peta, we're having this same issue, but with .sapssd. Does the same solution you recommended above also apply to the .sapssd file extension? I read a similar thread () and it suggested deleting the .SAPSSD file type in Windows Explorer. Would you please let me know if you recommend what you have in this thread, or what is in the other thread (). Thanks, Mitchi
Edited by: Mitchi Haight on Sep 30, 2009 3:58 PM
Hi Mitchi
The message pop-up is from MS Windows as it already has an extension definition which is associated with another application.
It is MS Windows that is saying it has a program conflict with the extension type (.ssd / .sapssd) that the portal is trying to open using the SAPGui
You can either:
1. delete the associations by deleting the .ssd and .sapssd extensions in MS Windows
or
2. set the association for both .ssd (EP6 below SP19) and .sapssd (EP6 SP19 and up and EP7)
The reason for the extension change from .ssd to .sapssd is I suspect due to applications like Snaggit (screen capture) using the .ssd extension. Which is why removing the .ssd extension works.
Removing the .sapssd extension is only useful if it is incorrectly assigned.
Either way it is just easier to set the extensions as per the registry key updates I specified before.
Best Regards
Peta
Hi Kristian,
we resolved this issue with out SAP help and please
Step 1 : On Windows XP SP2 --> Open windows explorer and choose tools->folder options->file types
Step 2: Look for SDD file extension type and check which application is mapped. in my case it was mapped to Snagit and changed to SAPGUI but it did not help. Finally I deleted SDD file extention from windows explorer -> tools->folder options->file types , Now it is working fine.
I mean no pop-ups asking save or open etc and also Snagit is also working fine.
Thanks
Venkat Tamma
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Kristian,
See SAP note 901949 and the referenced note 825464; a hotfix is attached to the latter from SP14 on. The problem will be solved in general from SP19 on.
Hope it helps
Detlev
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
10 | |
10 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.