on 11-16-2011 8:02 PM
Hi,
Right now I'm upgrading the system from Netweaver 7.0 EHP2 to Netweaver 7.3 and I'm in the phase
PREP_EXTENSION/SUBMOD_EXTENSION_NEW/ADDON_QCALC! with the component SAP_BS_FND and I download the SAP_BS_FND 730 but is not working... I see in some notes that for Netweaver 7.3 that's the release that I have to
apply for that component but the upgrade don't accept it...
This are the error in the log:
2 ETN236XCalculation of the installation queue of included add-ons ...
3 ETN247 The calculation is based on the following software component vector:
3 ETN248 Component: "PI_BASIS" rel. "730", Support Package level: "0005" (component type "X")
3 ETN248 Component: "SAP_ABA" rel. "730", Support Package level: "0005" (component type "S")
3 ETN248 Component: "SAP_BASIS" rel. "730", Support Package level: "0005" (component type "S")
3 ETN248 Component: "SAP_BW" rel. "730", Support Package level: "0005" (component type "W")
3 ETN248 Component: "ST-PI" rel. "2008_1_710", Support Package level: "0004" (component type "X")
3 ETN248 Component: "BI_CONT" rel. "705", Support Package level: "0" (component type "A")
3 ETN248 Component: "FINBASIS" rel. "600", Support Package level: "0" (component type "A")
3 ETN248 Component: "SAP_BS_FND" rel. "001", Support Package level: "0" (component type "A")
3 ETN248 Component: "SEM-BW" rel. "600", Support Package level: "0" (component type "A")
3 ETN248 Component: "ST-A/PI" rel. "01N_700BCO", Support Package level: "0" (component type "A")
3 ETN256 You want to install the following add-on components:
3 ETN248 Component: "BI_CONT" rel. "735", Support Package level: "0" (component type "A")
3 ETN248 Component: "FINBASIS" rel. "634", Support Package level: "0" (component type "A")
3 ETN248 Component: "SAP_BS_FND" rel. "730", Support Package level: "0" (component type "A")
3 ETN248 Component: "SEM-BW" rel. "634", Support Package level: "0" (component type "A")
3 ETN248 Component: "ST-A/PI" rel. "01N_710BCO", Support Package level: "0" (component type "A")
2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
3WETN424 Package "SAPKITAB8G" : "Is an add-on installation package" "->" "reject this package"
3 ETN262 Calculating queue part for add-on "SAP_BS_FND" rel. "730"
3 ETN490 Use the Add-On installation package "SAPK-730GGINSAPBSFND" (type &4"AOX") for Add-On &2"SAP_BS_FND" rel.&3"730"
3 ETN245 The following import prerequisites of OCS Package "SAPK-730GGINSAPBSFND" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "SAP_BS_FND" rel."701" is not installed
2WETN543 OCS package "SAPK-730GGINSAPBSFND" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "15.11.2011"
1 ETN255 End time: "20:25:06"
1 ETN214 ."**************************************************"
Thanks a lot for the help!!
Carlos
But why I have to apply the addon 701 if the system have the 702 release for that component...?
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
SAP_BASIS 702 0009 SAPKB70209 SAP Basis Component
PI_BASIS 702 0009 SAPK-70209INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0004 SAPKITLRD4 SAP Solution Tools Plug-In
SAP_BS_FND 702 0000 - SAP Business Suite Foundation
SAP_BW 702 0009 SAPKW70209 SAP Business Warehouse
FINBASIS 600 0019 SAPK-60019INFINBASIS FINBASIS 600 : Add-On Supplement
BI_CONT 705 0005 SAPK-70505INBICONT BI_CONT 705: Add-On Installation
SEM-BW 600 0019 SAPKGS6019 SEM-BW 600 : Add-On Supplement
ST-A/PI 01N_700BCO 0000 - Servicetools for other App./Netweaver 04
Thanks!!!
Carlos
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Your system netweaver component version is 702 while ERP components (SEM-BW and FINBASIS) are on 600 release which is not supported. If netweaver is on 702 release then corresponding release for ERP component is 605.
Also, as per the note which I mentioned earlier, it states as below:
Required SAP and add-on releases prior to the upgrade:
SAP_BASIS 701 as part of EHP4 of SAP ERP 6.0 with
SEM-BW 604
FINBASIS 604
SAP_BS_FND 701
But in your case SEM-BW and FINBASIS are on 600 release and SAP_BS_FND is on 702 release. It looks like you are not on supported combination of add-on's. Please check.
Thanks
Sunny
Hi,
You might need to upload ACP in order to upgrade SAP_BS_FND to Netweaver 7.3 release. Please refer to SAP note 1539356.
Thanks
Sunny
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
3 ETN245 The following import prerequisites of OCS Package "SAPK-730GGINSAPBSFND" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "SAP_BS_FND" rel."701" is not installed
2WETN543 OCS package "SAPK-730GGINSAPBSFND" does not match the current software component vector
Please download SAP_BS_FND 701 from SAP service marketplace.
Extract the file and place it into /usr/sap/trans/EPS/in
In the upgrade phase you will be required to search the /EPS/in again to ensure that all the required patches are in the queue.
Hope this helps.
Regards,
Deepak Kori
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Carlos,
As per the below log you need to download the SAP_BS_FND" rel."701 add-on.
And also please check the dependency and requirement set.
i hope it will help you.
Regards,
Kiran .V
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
85 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.