cancel
Showing results for 
Search instead for 
Did you mean: 

/ASU/UPGRADE is terminated.(Runtime Error! disp+work.EXE)

Former Member
0 Kudos

Dear all,

I was doing sap upgrade .

So I tried pre-check /ASU/UPGRADE, So workprocess was Terminated.

Popup Appered .

"Application Popup : Microsoft Visual C++ Runtime Library : Runtime Error!

Program: D:\usr\sap\SKT\SYS\exe\run\disp+work.EXE

This application has requested the Runtime to terminate it in an unusual way.

Please contact the application's support team for more information."

If not you know, please tell us how to proceed.

Best Regards,

Naofumi Yamazu

from

WIndows Server 2003 x64 R2/SP2

Oracle 10.2.0.4 x64

SAP R/3 46C SR1 ( Kernel 46D_EXT 32bit)

SAP_BASIS / 20

SAP_ABA / 20

SAP_APPL / 16

SAP_HR / 6

ST-PI 2005_1_46C / 8

To

WIndows Server 2003 x64 R2/SP2

Oracle 10.2.0.4 x64

SAP ERP 6.0 SR3 ( Kernel 700 x64)

Accepted Solutions (1)

Accepted Solutions (1)

Former Member
0 Kudos

Hello,

This is strange,

Could you go through the following note, however this is normally for kernel upgrade problems,

Note 1375494 - SAP system does not start after applying SAP kernel patch

Thanks

Answers (1)

Answers (1)

Former Member
0 Kudos

SM21

System Log: Local Analysis of kokitmp 1

From date/time............. 10.11.2011 / 10:00:00

To date/time............... . . /

User.......................

Transaction code...........

Terminal...................

Task.......................

Problem class..............

Further restrictions.......

Sorted ? ................ SOFI

Pages with single entries 00000100

With statistics............

-


System Log: Local Analysis of kokitmp 2

-


|Time |Ty.|Nr|Cl.|User |Tcod|MNo|Text Date : 10.11.11

-


|10:51:53|DIA|00|000|DDIC |/ASU|Q0E|Signal e06 received by operating system

|10:51:53|DIA|00|000|DDIC |/ASU|Q02|Stop Workproc 0, PID 860

|10:56:36|RD | | | | |Q0I|Operating system call recv failed (error

| | | | | | | |no. 10054)

|10:56:51|WRK|00| | | |Q0Q|Start Workproc 0, Pid 3248

|10:56:54|DIA|00|000|DDIC |/ASU|R47|Delete session 001 after error 023

|10:58:48|DIA|01|000|DDIC |/ASU|Q0E|Signal e06 received by operating system

|10:58:49|DIA|01|000|DDIC |/ASU|Q02|Stop Workproc 1, PID 1620

|11:00:33|RD | | | | |Q0I|Operating system call recv failed (error

| | | | | | | |no. 10054)

|11:00:51|WRK|00| | | |Q0Q|Start Workproc 1, Pid 8348

|11:00:51|DIA|01|000|DDIC |/ASU|R47|Delete session 002 after error 023

|11:06:11|DIA|01|000|DDIC |/ASU|Q0E|Signal e06 received by operating system

|11:06:11|DIA|01|000|DDIC |/ASU|Q02|Stop Workproc 1, PID 8348

|11:07:11|WRK|00| | | |Q0Q|Start Workproc 1, Pid 2880

|11:07:11|DIA|01|000|DDIC |/ASU|R47|Delete session 002 after error 023

|11:27:19|DIA|00| | | |Q02|Stop Workproc 0, PID 3248

|11:27:19|RD | | | | |Q0I|Operating system call recv failed (error

| | | | | | | |no. 10054)

|11:27:20|DIA|01| | | |Q02|Stop Workproc 1, PID 2880

|11:27:20|BTC|09| | | |Q02|Stop Workproc 9, PID 428

|11:27:20|DIA|02| | | |Q02|Stop Workproc 2, PID 2088

|11:27:20|BTC|12| | | |Q02|Stop Workproc12, PID 356

|11:27:20|BTC|11| | | |Q02|Stop Workproc11, PID 2812

|11:27:20|DIA|04| | | |Q02|Stop Workproc 4, PID 1864

|11:27:20|DIA|03| | | |Q02|Stop Workproc 3, PID 268

|11:27:20|BTC|10| | | |Q02|Stop Workproc10, PID 412

|11:27:20|SPO|13| | | |Q02|Stop Workproc13, PID 2340

|11:27:23|ENQ|08| | | |Q02|Stop Workproc 8, PID 196

|11:27:23|UPD|06| | | |Q02|Stop Workproc 6, PID 3032

|11:27:23|UPD|07| | | |Q02|Stop Workproc 7, PID 456

|11:27:23|UP2|14| | | |Q02|Stop Workproc14, PID 2256

|11:27:23|UPD|05| | | |Q02|Stop Workproc 5, PID 2292

|11:27:26|DP | | | | |Q0M|Message server disconnected

|11:27:26|DP | | | | |Q05|R/3 System stop, dispatcher PID 28

|11:27:27|MS | | | | |Q02|Stop Msg Server, PID 1328

|11:28:04|DP | | | | |E10|Buffer SCSA Generated with Length 4096

|11:28:04|DP | | | | |Q00|R/3 System start, SAPSYSTEM 00, dispatcher

| | | | | | | |PID 2596

|11:28:04|MS | | | | |Q01|Start Msg Server, 1 times since system

| | | | | | | |startup. PID 1272

|11:28:04|DP | | | | |Q0K|Connection to message server (on kokitmp)

| | | | | | | |established

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 1, Pid 9200

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 4, Pid 684

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 9, Pid 1748

|11:28:04|WRK|00| | | |Q0Q|Start Workproc13, Pid 404

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 7, Pid 1840

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 0, Pid 8852

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 2, Pid 2408

|11:28:04|WRK|00| | | |Q0Q|Start Workproc10, Pid 1264

|11:28:04|WRK|00| | | |Q0Q|Start Workproc11, Pid 2960

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 8, Pid 2192

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 5, Pid 8912

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 6, Pid 1796

|11:28:04|WRK|00| | | |Q0Q|Start Workproc14, Pid 1096

|11:28:04|RD | | | | |S00|SAP Gateway Started (PID: 5152)

|11:28:04|WRK|00| | | |Q0Q|Start Workproc 3, Pid 8860

|11:28:04|WRK|00| | | |Q0Q|Start Workproc12, Pid 892

|11:28:05|DIA|00| | | |BB0|Buffer TABL started with 6000000 bytes

|11:28:05|DIA|00| | | |BB0|Buffer TABLP started with 002048000 bytes

|11:28:05|DIA|00| | | |BB0|Buffer EIBUF started with 4096k bytes

|11:28:05|DIA|00| | | |BB0|Buffer CUA started with 3000k bytes

|11:28:05|DIA|00| | | |BB0|Buffer CALE started with 500000 bytes

|11:28:05|UPD|07| | | |E10|Buffer RSCPCCC Generated with Length

| | | | | | | |3000000

|11:28:07|DIA|00|000|SAPSYS | |A10|Initialization complete

|11:28:28|DIA|00|000|SAPSYS | |AB0|Run-time error "ASSIGN_LENGTH_0" occurred

|11:28:29|DIA|00|000|SAPSYS | |AB1|> Short dump "111110 112828 kokitmp SAPSYS

| | | | | | | |" generated

|11:28:29|DIA|00|000|SAPSYS | |D01|Transaction termination 00 671 (

| | | | | | | |ASSIGN_LENGTH_0 20111110112828kokitmp

| | | | | | | |SAPSYS 0001 )

|11:28:42|DIA|00|000|DDIC |/ASU|Q0E|Signal e06 received by operating system

|11:28:42|DIA|00|000|DDIC |/ASU|Q02|Stop Workproc 0, PID 8852

|11:29:24|WRK|00| | | |Q0Q|Start Workproc 0, Pid 2420

|11:29:25|DIA|00|000|DDIC |/ASU|R47|Delete session 002 after error 023

|11:33:28|DIA|00|000|SAPSYS | |AB0|Run-time error "ASSIGN_LENGTH_0" occurred

|11:33:28|DIA|00|000|SAPSYS | |AB1|> Short dump "111110 113328 kokitmp SAPSYS

| | | | | | | |" generated

|11:33:28|DIA|00|000|SAPSYS | |D01|Transaction termination 00 671 (

| | | | | | | |ASSIGN_LENGTH_0 20111110113328kokitmp

| | | | | | | |SAPSYS 0001 )

|11:38:24|DIA|00|000|SAPSYS | |GC2|RSALSUP5 cancelled due to timeout

|11:44:33|DIA|01|000|DDIC |/ASU|Q0E|Signal e06 received by operating system

|11:44:33|DIA|01|000|DDIC |/ASU|Q02|Stop Workproc 1, PID 9200

|11:45:04|RD | | | | |Q0I|Operating system call recv failed (error

| | | | | | | |no. 10054)

|11:45:04|WRK|00| | | |Q0Q|Start Workproc 1, Pid 8780

|11:45:04|DIA|01|000|DDIC |/ASU|R47|Delete session 001 after error 023

Reading:

Number of records read......... 1346

Number of records selected..... 82

Old records skipped............ 1264

Further selection:

Number of records read......... 82

Number of records selected..... 76

Parameter records suppressed... 6

Number of records printed...... 76

End of system log

System Log: Local Analysis of kokitmp 3

C o n t e n t s

-


Contents Page Start End

Selection criteria 1

2 10.11.2011 10:51:53 - 11:45:04

Contents 3

-


End of program -


Former Member
0 Kudos

M Thu Nov 10 11:28:42 2011

M call semaphore clean-up function ...

M ***LOG Q0E=> DpSigGenHandler, Exception (e06d7363) [dpnttool.c 390]

M -


C-STACK -


SAP (R) - R/3(TM) Callstack, Version 1.0

Copyright (C) SAP AG. All rights reserved.

-


Application exception occurred:

Exception : e06d7363 (Unknown exception)

App : disp+work.EXE (pid=8852)

When : 11/10/2011 11:28:42.601

Threads : 2

-


Computer Name : KOKITMP

User Name : SAPServiceSKT

-


Number of Processors: 4

Processor Type: EM64T Family 6 Model 44 Stepping 2

Windows Version : 5.2 Current Build: 3790

-


Stack Dump for Thread Id 2070

eax=031b8cc4 ebx=00000000 ecx=00000000 edx=77b4155d esi=031b8d54 edi=031b8d54

eip=7d4f228c esp=031b8cc0 ebp=031b8d14 iopl=0 nv up ei pl nz na po nc

cs=0023 ss=002b ds=e823002b es=f7d9002b fs=0053 gs=78b2002b efl=00200206

function : RaiseException

7d4f2274 85c9 test ecx,ecx

7d4f2276 894dc0 mov [ebp+0xc0],ecx ss:063704ce=00000000

7d4f2279 7407 jz RaiseException+0x44 (7d4f2282)

7d4f227b 57 push edi

7d4f227c 8d7dc4 lea edi,[ebp+0xc4] ss:063704ce=00000000

7d4f227f f3a5 rep movsd ds:031b8d54=031b8db4 es:031b8d54=031b8db4

7d4f2281 5f pop edi

7d4f2282 8d45b0 lea eax,[ebp+0xb0] ss:063704ce=00000000

7d4f2285 50 push eax

7d4f2286 ff1538054e7d call dword ptr [7d4e0538] ds:7d4e0538=7d5fead7

FAULT-> 7d4f228c 5e pop esi

7d4f228d c9 leave

7d4f228e c21000 ret 0x10

7d4f2291 8365c000 and dword ptr [ebp+0xc0],0x0 ss:063704ce=00000000

7d4f2295 ebeb jmp FindResourceExW+0x9 (7d4f2382)

7d4f2297 90 nop

7d4f2298 90 nop

7d4f2299 90 nop

7d4f229a 90 nop

7d4f229b 90 nop

--> Stack Back Trace <--

FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name

031b8d14 77b53259 e06d7363 00000001 00000003 031b8d48 kernel32!RaiseException

031b8d54 77b53c81 031b8d70 77b88f60 dffd19d8 dffd19c0 MSVCRT!CxxThrowException

031b8db4 00c63bc7 dffd0e50 00000000 01619150 01619170 MSVCRT!_RTDynamicCast

031b8e5c 00c509ce 031b8ed4 031b8ed8 031b8edc 00000101 disp+work!<nosymbols>

031b8e90 00c50367 031b8ecc 031b8ed4 031b8ed8 031b8edc disp+work!<nosymbols>

031b8eac 00c4a5cf 031b8ecc 031b8ed4 031b8ed8 031b8edc disp+work!<nosymbols>

031b8eec 00c4dc28 00e91710 27e8cd14 dffd06c8 00043340 disp+work!<nosymbols>

031b8f04 0068180a 031bf130 00000000 00000000 0000001b disp+work!<nosymbols>

031bf140 0062ed62 00000000 00000000 031bf170 00000001 disp+work!<nosymbols>

00e83980 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>

Former Member
0 Kudos

Stack Dump for Thread Id ebc

eax=00000000 ebx=00334eb0 ecx=00000000 edx=00000000 esi=77b70888 edi=00000000

eip=7d5fcd1c esp=0504fc78 ebp=0504fcb8 iopl=0 nv up ei pl nz na pe nc

cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000202

function : NtFsControlFile

7d5fcd07 b836000000 mov eax,0x36

7d5fcd0c b91b000000 mov ecx,0x1b

7d5fcd11 8d542404 lea edx,[esp+0x4] ss:08207433=00000000

7d5fcd15 64ff15c0000000 call dword ptr fs:[000000c0] fs:000000c0=????????

7d5fcd1c c22800 ret 0x28

--> Stack Back Trace <--

FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name

0504fcb8 00c42722 00000294 00000000 00000000 00335570 ntdll!NtFsControlFile

0504ff84 77b6b530 00000000 00000000 00000000 00334eb0 disp+work!<nosymbols>

0504ffb8 7d4f0729 00334eb0 00000000 00000000 00334eb0 MSVCRT!endthreadex

0504ffec 00000000 77b6b4bc 00334eb0 00000000 00000000 kernel32!FlsSetValue

-


M -


M call clean-up function ...

M in_ThErrHandle: 1

M ThSigHandler: signal (step 4, th_errno 11, action 4)

M

M Info for wp 0

M

M stat = 4

M reqtype = 1

M act_reqtype = 1

M tid = 15

M mode = 1

M len = 217

M rq_id = 180

M rq_source = 1

M rq_info = 0

M last_tid = 15

M last_mode = 1

M int_checked_resource = 0

M ext_checked_resource = 0

M report = > <

M action = 0

M tab_name = > <

M

M Modeinfo for User T15/M1

M

M tm state = 2

M uid = 16

M term type = 0x4

M display = 0x8

M cpic_no = 0

M cpic_idx = -1

M usr = >DDIC <

M terminal = >vcenter <

M client = >000<

M conversation_ID = > <

M appc_tm_conv_idx = -1

M blockSoftCanel = NO

M imode = 1

M mode state = 0x12

M mode clean_state = 1

M th_errno = 11

M rollout_reason = 1

M last_rollout_level = 7

M async_receives = 0

M cpic_receive = 0

M em handle = 0

M roll state = 4

M abap state = 4

M em state = 3

M eg state = 1

M spa state = 3

M enq state = 0

M next hook = T-1/U-1/M255

M master hook = T-1/U-1/M255

M slave hook = T-1/U-1/M255

M debug_tid = -1

M mode type = 0x1

M debug = 0

M tcode = >/ASU/UPGRADE <

M client conversation_ID = > <

M server conversation_ID = > <

M lock = 0

M max enq infos = 0

M act enq infos = 0

M em_hyper_hdl = NULL

M

M Adresse Offset Data from input buffer

M -


M 05850040 000000 01001400 00000000 10080100 ca010100 |................|

M 05850050 000016 08010101 01080000 00010101 03000400 |................|

M 05850060 000032 00060b01 03010600 0b080000 00010501 |................|

M 05850070 000048 00000023 01060007 000f3230 322e3230 |...#......202.20|

M 05850080 000064 382e322e 36372020 20000700 18000c32 |8.2.67 ......2|

M 05850090 000080 30322e32 30382e32 2e363700 18000800 |02.208.2.67.....|

M 058500A0 000096 07766365 6e746572 00080011 00014500 |.vcenter......E.|

M 058500B0 000112 11001300 04373230 20001300 12000437 |.....720 ......7|

M 058500C0 000128 32302000 12000600 06534150 47554900 |20 ......SAPGUI.|

M 058500D0 000144 06012500 20444136 32383232 31393632 |..%%. DA628221962|

M 058500E0 000160 33343535 33393430 35364145 38324145 |3455394056AE82AE|

M 058500F0 000176 37443732 43012500 17000000 17050000 |7D72C.%%.........|

M 05850100 000192 00050006 67000898 6e1283c0 4a3e4006 |....g...n...J>@.|

M 05850110 000208 67ffff00 00ffff0c 0c |g........ |

M -


M

Former Member
0 Kudos

M *****************************************************************************

M *

M * LOCATION SAP-Server kokitmp_SKT_00 on host kokitmp (wp 0)

M * ERROR ThSigHandler: signal

M *

M * TIME Thu Nov 10 11:28:42 2011

M * RELEASE 46D

M * COMPONENT Taskhandler

M * VERSION 1

M * RC 11

M * MODULE thxxhead.c

M * LINE 8658

M * COUNTER 1

M *

M *****************************************************************************

M

M Entering TH_CALL_HOOKS

M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP

M Entering ThSetStatError

M *** WARNING => sql break failed (-1)

M ThErrHandle: don't try rollback again

M ThErrHandle: call ThrCoreInfo

A ** RABAX: level LEV_RX_ROLLBACK entered.

A ** RABAX: level LEV_RX_ROLLBACK completed.

A ** RABAX: level LEV_RX_DB_ALIVE entered.

A ** RABAX: level LEV_RX_DB_ALIVE completed.

A ** RABAX: level LEV_RX_HOOKS entered.

A ** RABAX: level LEV_RX_HOOKS completed.

A ** RABAX: level LEV_RX_STANDARD entered.

A ** RABAX: level LEV_RX_STANDARD completed.

A ** RABAX: level LEV_RX_C_STACK entered.

A ** RABAX: level LEV_RX_C_STACK completed.

A ** RABAX: level LEV_RX_MEMO_CHECK entered.

A ** RABAX: level LEV_RX_MEMO_CHECK completed.

A ** RABAX: level LEV_RX_INTERFACES entered.

A ** RABAX: level LEV_RX_INTERFACES completed.

A ** RABAX: level LEV_RX_GET_MESS entered.

A ** RABAX: level LEV_RX_GET_MESS completed.

A ** RABAX: level LEV_RX_INIT_SNAP entered.

A ** RABAX: level LEV_RX_INIT_SNAP completed.

A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.

A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.

A ** RABAX: level LEV_RX_WRITE_SNAP entered.

A ** RABAX: level LEV_SN_END completed.

A ** RABAX: level LEV_RX_SET_ALERT entered.

A ** RABAX: level LEV_RX_SET_ALERT completed.

A ** RABAX: level LEV_RX_COMMIT entered.

A ** RABAX: level LEV_RX_COMMIT completed.

A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.

A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.

A ** RABAX: level LEV_RX_RESET_PROGS entered.

A ** RABAX: level LEV_RX_RESET_PROGS completed.

A ** RABAX: level LEV_RX_STDERR entered.

A ** RABAX: level LEV_RX_STDERR completed.

A ** RABAX: level LEV_RX_RFC_ERROR entered.

A ** RABAX: level LEV_RX_RFC_ERROR completed.

A ** RABAX: level LEV_RX_RFC_CLOSE entered.

A ** RABAX: level LEV_RX_RFC_CLOSE completed.

A ** RABAX: level LEV_RX_IMC_ERROR entered.

A ** RABAX: level LEV_RX_IMC_ERROR completed.

A ** RABAX: level LEV_RX_DATASET_CLOSE entered.

A ** RABAX: level LEV_RX_DATASET_CLOSE completed.

A ** RABAX: level LEV_RX_ERROR_SAVE entered.

A ** RABAX: level LEV_RX_ERROR_SAVE completed.

A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.

A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.

A ** RABAX: level LEV_RX_END entered.

A ** RABAX: level LEV_RX_END completed.

A ** RABAX: end RX_RETURN

M ThIErrHandle: Entering ThErrHdlUser

M ThErrHdlUser: set th_errno (11)

M ThErrHdlUser: save context

B Disconnecting from ALL connections:

B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time

B 000 000 R/3 000000 ACTIVE YES YES NO 20111110 112804

C Disconnecting from connection 0 ...

C Now I'm disconnected from ORACLE

B Disconnected from connection 0

B statistics db_con_commit (com_total=106, com_forced=6, com_tx=6)

B statistics db_con_rollback (roll_total=3, roll_forced=2, roll_tx=2)

M ***LOG Q02=> wp_halt, WPStop (Workproc 0 8852) [dpnttool.c 310]

M return from clean-up function ...

-


trc file: "dev_w0", trc level: 1, release: "46D"

-


*

  • ACTIVE TRACE LEVEL 1

  • ACTIVE TRACE COMPONENTS all, M

*

B

B Thu Nov 10 11:29:24 2011

B create_con (con_name=R/3)

B Loading DB library 'D:\usr\sap\SKT\SYS\exe\run\dboraslib.dll' ...

B Library 'D:\usr\sap\SKT\SYS\exe\run\dboraslib.dll' loaded

B Version of library 'D:\usr\sap\SKT\SYS\exe\run\dboraslib.dll' is "46D.00", patchlevel (0.2534)

B New connection 0 created

M relno 4640

M patchlevel 0

M patchno 2605

M intno 0

M pid 2420

M

M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2420) [dpxxdisp.c 976]

I MtxInit: -2 0 0

M DpRqQInit: Parameter rdisp/queue_lock_level = 2

X EmInit: MmSetImplementation( 2 ).

X <ES> client 0 initializing ....

X Using implementation std

M <ES> Memory Reset enabled

X ES initialized.

M calling db_connect ...

C Got TNS_ADMIN=
kokitmp\SAPMNT\SKT\sys\profile\oracle from environment

C Got NLS_LANG=AMERICAN_AMERICA.US7ASCII from environment

C Logon as OPS$-user to get SAPSR3's password

C Connecting as /@SKT on connection 0 ... (dbsl 46D 210610)

former_member188883
Active Contributor
0 Kudos

Hi,

Can you check whether the correct version of the Microsoft Visual C++ Redistributable has been installed in your 64 bit server or not. This should probably resolve your issue.

You can download the required file from microsfot site. File name should be something like vcredist_x86.

Regards,

Deepak Kori

Former Member
0 Kudos

Dear all,

Thanks for your advance.

I Attached VC++ 2005(vcredit_x86.exe and x64, too) .

But problem is not solved.

Normal SAP Transactoin was succeed.

(DB02, SM21, ST03...)

only /ASU/UPGRADE .

If not you know, please tell us how to proceed.

Best Regards,

Naofumi Yamazu

Former Member
0 Kudos

Dear all,

>

> Thanks for your advance.

>

> I Attached VC++ 2005(vcredit_x86.exe and x64, too) .

>

> But problem is not solved.

>

> Normal SAP Transactoin was succeed.

> (DB02, SM21, ST03...)

>

> only /ASU/UPGRADE .

>

> If not you know, please tell us how to proceed.

>

> Best Regards,

>

> Naofumi Yamazu

Hi,

Could you execute the "disp+work.exe" at the command prompt and paste the result here?

Best regards,

Orkun Gedik

Former Member
0 Kudos

Dear Gedik-san,

I Attached disp+work result.

Best Regards,

Naofumi Yamazu

D:\WORK\Upgrade\SAPPRO\temp>D:\usr\sap\SKT\sys\exe\run\disp+work.exe

-


disp+work information

-


kernel release 46D

kernel make variant 46D_EXT

compiled on NT 5.2 3790 Service Pack 2 x86 MS VC++ 12.00

compile time Oct 18 2011 20:49:54

update level 0

patch number 2605

source id 0.2605

-


supported environment

-


database (SAP, table SVERS) 46A

46B

46C

46D

operating system Windows NT 4.0

Windows NT 5.0

Windows NT 5.1

Windows NT 5.2

System build information:

-


LCHN :

D:\WORK\Upgrade\SAPPRO\temp>

Former Member
0 Kudos

Dear all,

>Note 1375494 - SAP system does not start after applying SAP kernel patch

This note seems for EXT2 Kernel.

but current kernel is 46D_EXT 32bit.

I thought Server is x64 Architecture, but kernel is 32bit kernel.

So I was install wc++ 2005 x86 and x64.

I was deleted vc++ 2005 x64 and x86, reinstall x64 and os reboot.

but problem not resolved.

Best Regards,

Naofumi Yamazu

Former Member
0 Kudos

Dear all,

Problem was solved.

SAP said,

46D_EXT kernel not built by VC++ 2005 .

(Microsoft Visual C++ 6.0 runtime)

So I was changed kernel 46D_EXT to 46D_EXT2.

Thanks for all advance.

Naofumi Yamazu