on 10-05-2011 11:09 AM
Hi!
So I manage to get past my initial problems. Now the installation ran for a long time, but then I encountered a new problem when the installation came to the "START INSTANCE" point:
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:10 minutes. Giving up.)
What does "ABAP: UNKNOWN" mean??? Any ideas why I couldt not start? Is it possible to "force start" it or manually? (e.g. like in Windows services)
Dear All,
The main problem is that you should increase your page file size which can be adjusted through your computer performans settings.
Just follow my informations:
1- Click right to My Computer
2- Properties->Advanced System Settings
3- in Performance sub-task -> Settings -> Advanced
4- in Virtual Memory sub-task -> Change page file size to minimum 10240 and maximum 20480 as can be seen in the picture below.
5-Then click OK and restart your session.
in conclusion, problem solved.
Best Regards.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I can only recommend to use the same values for Initial and Maximum Size of the pagefile.
Not doing so may still result in memory allocation errors.
Microsoft's pagefile extend algorithm is working slower than you may request memory.
As a result you still may face memory allocation errors even the configured maximum size of the pagefile has not been reached.
This is valid for all operating system versions (up to Windows Server 2012/Windows 😎
kind regards
Peter
I'm experiencing the same error while installing SAP Standalone option.. my installation is at phase 27 of 36 (Running Phase : starting Instance), I have 10GB swap space with 8GB RAM under VM (Oracle Linux). in my case SAP is connected to the the oracle database... R3check/R3trans -xd returns 000 no error.
An error occurred while processing service SAP ERP 6.0 Support Release 3 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step :ABAP processes of instance ENH/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 minutes. Giving up.).
I am also getting the same problem while Installing SAP on Suse Linux Enterprise Edition 10
Please anybody help me
Note : I found the files dev_disp and dev_w0 at /usr/sap/ENH/DVEBMGS00/work.
Even though the above error is raising after somany time I tried "RE-TRY" option
Thanks
Regards
Mohammad Ayaz Ahmed
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
I went through all the SDN post for the eror and finally increasing paging size solved my issue and the 24 steps wre completed successfully
Regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
I am getting the same issue..How did u guys finally resolve this issue??
I am trying to install SAP ABAP sp6 64bit developer edition.
On Vm -Window 7
please let me know steps to follow..
Regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
In my case, installing Solution Manager 7.1 SR1 on Windows 2008 R2 (64 bit), the only thing I did was logging in with <SID>ADM, instead of the local administrator account. That solved it.
Hope it helps!
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
i cant find these files.. where are they?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
is there anyone that can help me about same problem??
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 3 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step: ABAP processes of instance NSP/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:10 minutes. Giving up.). You can now:
Log files are written to C:\Program Files/sapinst_instdir/NW703/AS-ABAP/ADA/CENTRAL/
. the
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
i'm not able to installed Sap Netweaver(NWASABAPTRIAL70206) completly...
can anybody can help me how to resolve this error
please check this link for that error...
http://picturepush.com/public/7361527
thanks in advance.
4 ETW000 R3trans version 6.19 (release 720 - 24.08.10 - 14:38:42).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 17.01.2012 - 10:09:11
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -xd3
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Jan 17 10:09:11 2012 19645 0.019645
4 ETW000 [dev trc ,00000] db_con_init called 1466 0.021111
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 73 0.021184
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 26 0.021210
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 705 0.021915
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Further info needed about this trace error from R3trans -xd
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
new default.pfl looks like this now:
SAPDBHOST = UranusATEA
j2ee/dbtype = sap
j2ee/dbname = NSP
j2ee/dbhost = UranusATEA
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = UranusATEA
system/type = ABAP
dbms_type=ADA
#----
SAP Message Server for ABAP
#----
rdisp/mshost = UranusATEA
rdisp/msserv = 0
rdisp/msserv_internal = 3900
login/system_client = 001
Trans.og stil lgive the error:
4 ETW000 R3trans version 6.19 (release 720 - 06.04.10 - 16:31:00 with UA1430.1 / prepared for CSN 1287305).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.10.2011 - 15:28:29
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -xd
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 05 15:28:29 2011 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 0 0.000000
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
Hi,
>> ABAP: UNKNOWN
Means that the state in unknown
Execute "R3trans -xd" at the command prompt and paste the trans.log here. Or check trace files, such as dev_w0 under <drive>:\usr\sap\NSP\DVEBMGS00\work
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Oct 5, 2011 1:18 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
TRACE 2011-10-05 10:54:02.754 [iaxxclib.cpp:188]
CLib::load()
Opened sylib721.dll
TRACE 2011-10-05 10:54:02.754
exe dir is C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435
TRACE 2011-10-05 10:54:03.145
MessageLib initialized successfully.
INFO 2011-10-05 10:54:03.145 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435\dev_sap_kernel_test_05_Oct_2011_10_54_03.
INFO 2011-10-05 10:54:03.192 [synxcfile.cpp:416]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435\dev_sap_kernel_test_05_Oct_2011_10_54_03.
TRACE 2011-10-05 10:54:03.192 [syxxclogbook.cpp:209]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435\dev_sap_kernel
INFO 2011-10-05 10:54:03.207 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435\dev_sap_kernel_test_05_Oct_2011_10_54_03.
INFO 2011-10-05 10:54:03.207 [synxcfile.cpp:416]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435\dev_sap_kernel_test_05_Oct_2011_10_54_03.
TRACE 2011-10-05 10:54:03.207 [syxxclogbook.cpp:209]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435\dev_sap_kernel
TRACE 2011-10-05 10:54:03.207 [iaxxclib.cpp:188]
CLib::load()
Opened C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435/iaguieng721.dll
TRACE 2011-10-05 10:54:03.207 [iaxxgenimp.cpp:918]
CGuiEngineImp::init()
receiving and sending on port 21200
TRACE 2011-10-05 10:54:03.207 [syxxccuren.cpp:31]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/Users/KBeck/AppData/Local/Temp/2/sapinst_exe.5004.1317808435/jre')
lib=syslib module=syslib
Environment variable SAPINST_JRE_HOME set to value 'C:/Users/KBeck/AppData/Local/Temp/2/sapinst_exe.5004.1317808435/jre'.
TRACE 2011-10-05 10:54:04.348
exe dir is C:/Users/KBeck/AppData/Local/Temp/2/sapinst_exe.5004.1317808435
INFO 2011-10-05 10:54:04.379 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2011-10-05 10:54:04.379 [synxcfile.cpp:416]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2011-10-05 10:54:04.379 [iaxxclib.cpp:188]
CLib::load()
Opened C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435/iakdblib721.dll
TRACE 2011-10-05 10:54:04.379
SAPinst build information:
-
abi version : 721
make variant: 720_REL
build : 1147189
compile time: Apr 20 2010 22:51:41
TRACE 2011-10-05 10:54:04.848 [iaxxgenimp.cpp:469]
CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2011-10-05 10:54:04.848 [iaxxgenimp.cpp:488]
CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation Master</title>
<dialog/>
TRACE 2011-10-05 10:54:16.223 [iaxxclogintimeout.cpp:102]
CLoginTimeout::run()
Login in progress
TRACE 2011-10-05 10:54:16.301
Connection request to guiengine backend by host 192.168.1.19
TRACE 2011-10-05 10:54:16.332
Protocol version is 3.1
TRACE 2011-10-05 10:54:16.332
Send connect information
TRACE 2011-10-05 10:54:16.332
client logged on
TRACE 2011-10-05 10:54:16.566 [iaxxgenimp.cpp:1245]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2011-10-05 10:55:04.316 [iaxxdlghnd.cpp:97]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2011-10-05 10:55:04.316 [iaxxcdialogdoc.cpp:203]
CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2011-10-05 10:55:04.395 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x.
INFO 2011-10-05 10:55:04.395 [synxcfile.cpp:416]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x.
TRACE 2011-10-05 10:55:04.848 [iaxxgenimp.cpp:469]
CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2011-10-05 10:55:04.848 [iaxxgenimp.cpp:488]
CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2011-10-05 10:55:04.848 [iaxxgenimp.cpp:1245]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2011-10-05 10:55:08.285
current working directory is C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/
INFO 2011-10-05 10:55:08.285 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2011-10-05 10:55:08.285 [synxcfile.cpp:416]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2011-10-05 10:55:08.285 [syxxcfile.cpp:168]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
lib=syslib module=syslib
Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
INFO 2011-10-05 10:55:08.316 [synxcfile.cpp:416]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel.
TRACE 2011-10-05 10:55:08.316 [syxxcnode.cpp:441]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Users/KBeck/AppData/Local/Temp/2/sapinst_exe.5004.1317808435/dev_sap_kernel to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/dev_sap_kernel
TRACE 2011-10-05 10:55:08.316 [syxxclogbook.cpp:209]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel
TRACE 2011-10-05 10:55:09.160
Running with toplevel file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//toplevel.xml
TRACE 2011-10-05 10:55:09.223 [syxxcfile.cpp:130]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
lib=syslib module=syslib
Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2011-10-05 10:55:09.223 [syxxcnode.cpp:441]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.1.log, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.1.log
TRACE 2011-10-05 10:55:09.223 [syxxcfile.cpp:130]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
lib=syslib module=syslib
Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2011-10-05 10:55:09.223 [syxxcnode.cpp:441]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.1.log, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.1.log
TRACE 2011-10-05 10:55:09.363
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2011-10-05 10:55:09.379
Running with dialog file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//dialog.xml
TRACE 2011-10-05 10:55:09.473
Running with keydb file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//keydb.xml
TRACE 2011-10-05 10:55:09.770 [syxxcfile.cpp:130]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
lib=syslib module=syslib
Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2011-10-05 10:55:09.770 [synxcfile.cpp:516]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.3.xml
INFO 2011-10-05 10:55:09.895 [synxcfile.cpp:716]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.3.xml'.
TRACE 2011-10-05 10:55:10.941 [kdxxctaco.cpp:219]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2011-10-05 10:55:11.35 [syxxcfile.cpp:130]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
lib=syslib module=syslib
Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2011-10-05 10:55:11.35 [synxcfile.cpp:516]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.4.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.4.xml
INFO 2011-10-05 10:55:11.35 [synxcfile.cpp:716]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.4.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.4.xml'.
TRACE 2011-10-05 10:55:11.51 [kdxxctaco.cpp:252]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
after creating out stream
TRACE 2011-10-05 10:55:11.113 [kdxxctaco.cpp:286]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2011-10-05 10:55:12.395 [kdxxctaco.cpp:219]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2011-10-05 10:55:12.473 [kdxxctaco.cpp:252]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
after creating out stream
TRACE 2011-10-05 10:55:12.551 [kdxxctaco.cpp:286]
CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2011-10-05 10:55:16.676
SAPinst was started using commandline: C:\Users\KBeck\AppData\Local\Temp\2\sapinst_exe.5004.1317808435\sapinst.exe
TRACE 2011-10-05 10:55:16.676
SAPinst properties are :
GUISERVER_DIALOG_PORT=21212
GUISERVER_HTTP_PORT=4239
SAPINST_CONTROL_URL=control.xml
SAPINST_DIALOG_PORT=21200
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,ClusterMgt,SystemIdentity
SAPINST_KEYDB_URL=keydb.xml
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_URL=.
SAPINST_PACKAGES_URL=packages.xml
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SKIP_DIALOGS=false
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=true
SELFEXTRACTOR_EXECUTABLE_NAME=C:/Users/KBeck/Desktop/NWABAPTRIAL70206_64/SAP_NetWeaver_702e_Installation_Master/IM_WINDOWS_X86_64/sapinst.exe
here is the dev_disp file::
-
trc file: "dev_disp", trc level: 1, release: "720"
-
sysno 00
sid NSP
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 46
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile
UranusATEA\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_UranusATEA
pid 5844
Wed Oct 05 12:22:23 2011
kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
length of sys_adm_ext is 588 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5844) [dpxxdisp.c 1252]
shared lib "dw_xml.dll" version 46 successfully loaded
shared lib "dw_xtc.dll" version 46 successfully loaded
shared lib "dw_stl.dll" version 46 successfully loaded
shared lib "dw_gui.dll" version 46 successfully loaded
shared lib "dw_mdm.dll" version 46 successfully loaded
shared lib "dw_rndrt.dll" version 46 successfully loaded
shared lib "dw_abp.dll" version 46 successfully loaded
shared lib "dw_sym.dll" version 46 successfully loaded
shared lib "dw_aci.dll" version 46 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Wed Oct 05 12:22:28 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >UranusATEA_NSP_00 <
DpShMCreate: sizeof(wp_adm) 31696 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm) 156064 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
DpShMCreate: sizeof(file_adm) 268880 (80)
DpShMCreate: sizeof(vmc_adm) 30128 (2152)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3936
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007C20050, size: 6812336)
DpShMCreate: allocated sys_adm at 0000000007C20060
DpShMCreate: allocated wp_adm_list at 0000000007C23030
DpShMCreate: allocated wp_adm at 0000000007C23220
DpShMCreate: allocated tm_adm_list at 0000000007C2AE00
DpShMCreate: allocated tm_adm at 0000000007C2AE50
DpShMCreate: allocated wp_ca_adm at 000000000816DD60
DpShMCreate: allocated appc_ca_adm at 000000000817D770
DpShMCreate: allocated comm_adm at 000000000818D180
DpShMCreate: allocated slock_adm at 000000000821BB20
DpShMCreate: allocated file_adm at 0000000008241CD0
DpShMCreate: allocated vmc_adm_list at 0000000008283730
DpShMCreate: allocated vmc_adm at 00000000082837E0
DpShMCreate: allocated gw_adm at 000000000828ADA0
DpShMCreate: allocated j2ee_adm at 000000000828ADE0
DpShMCreate: allocated ca_info at 000000000828BD50
DpShMCreate: allocated wall_adm at 000000000828BD70
DpCommAttachTable: attached comm table (header=000000000818D180/ft=000000000818D190)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 2800 entries
DpSesCreateTable: created session table at 0000000002B00050 (len=161328)
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 2999MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 3000MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=Global\ES_SEG_00_001 ,size=956 MB, error=1455 [esnti.c 1269]
*****************************************************
Memory diagnostic *
*****************************************************
Systeminformation
-
Processor-Typ : Processor-Count : 2
Operating System : NT 6.1, Build 7601
Service Pack : Service Pack 1
-
NT Pagefile Informations
-
Config. minimum size : 0 K
Config. maximum size : 0 K
Avail. maximum size : 0 K
Num | Pagefile | Min.Size | Max.Size | Avail.Max | Curr.Size |
-
NT Task Manager Informations
-
Total Handles : 0
Total Threads : 0
Total Processes : 33746735
Commit Charge Total : 0 K
Commit Charge Limit : 1928156064 K
Commit Charge Peak : 0 K
Phys.Memory Total : 393225 K
Phys.Memory Available : 7685 K
File Cache : 1629044222 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 156250 K
-
Memory usage of current process
-
Total virt.address space : 0000008589934464 K
Avail.virt.address space : 0000008588086788 K
Private Pages : 0 K
Total heap size : 50353 K
Virtual memory regions : 45 K
Uncommitted heap memory : 42624 K
Allocated heap memory : 6387 K
Moveable heap memory : 0 K
DDE shared heap memory : 3125 K
-
Memory usage of all processes
-
PID | Image | Instance | Work.Set | WS Peak | Priv.Pages | PP Peak | Pg Fault |
5028 | sapstartsrv.exe | 94372 K | 95040 K | 118356 K | 168976 K | 116 | |
1764 | conhost.exe | 2860 K | 2860 K | 1008 K | 33468 K | 0 | |
5020 | msg_server.EXE | [MS] NSP_00 | 13984 K | 13984 K | 15420 K | 15424 K | 3 |
5844 | disp+work.EXE | 45852 K | 45852 K | 78912 K | 86840 K | 11 | |
1472 | conhost.exe | 2872 K | 2872 K | 1012 K | 1012 K | 0 | |
4872 | conhost.exe | 2868 K | 2868 K | 1012 K | 1012 K | 0 | |
Sum | 162808 K | 215720 K |
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 10287]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 10201]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 05 12:22:38 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Oct 05 11:22:38 2011
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
-
Dispatcher Queue Statistics Wed Oct 05 11:22:38 2011
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 0 | 2000 | 0 | 0 |
--------
+
DIA | 0 | 0 | 2000 | 0 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Oct 05 11:22:38 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Oct 05 11:22:38 2011
=============================
Slots: 1000, Used: 0, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 05 12:22:43 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UranusATEA_NSP_00 < (normal)
DpJ2eeDisableRestart
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: not attached to the message server
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5844) [dpxxdisp.c 11107]
DpHalt: Good Bye .....
Edited by: kimbeck on Oct 5, 2011 1:29 PM
Ok, got the output of R3trans -xd:
-
4 ETW000 R3trans version 6.19 (release 720 - 06.04.10 - 16:31:00 with UA1430.1 / prepared for CSN 1287305).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.10.2011 - 12:36:50
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -xd
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 05 12:36:50 2011 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 0 0.000000
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
-
I tried to logon the SAP console with NSPadmin but got an error here:
ERROR file opened at 20111005 125726 GMT Daylight Time, SAP-REL 720,0,38 RFC-VER 3 1142637 MT-SL
T:5128 Error in program 'mmc': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=UranusATEA, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'UranusATEA:3300' not reached
TIME Wed Oct 05 12:57:26 2011
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3255
DETAIL NiPConnect2: 192.168.1.19:3300
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
The default.pfl file contains:
SAPDBHOST = UranusATEA
j2ee/dbtype = sap
j2ee/dbname = NSP
j2ee/dbhost = UranusATEA
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = UranusATEA
system/type = ABAP
rdisp/bufrefmode = sendoff
#----
SAP Message Server for ABAP
#----
rdisp/mshost = UranusATEA
rdisp/msserv = 0
rdisp/msserv_internal = 3900
login/system_client = 001
btw I did do this, but the trans log still gives an error:
4 ETW000 R3trans version 6.19 (release 720 - 06.04.10 - 16:31:00 with UA1430.1 / prepared for CSN 1287305).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.10.2011 - 14:28:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -xd
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 05 14:28:35 2011 1575 0.001575
4 ETW000 [dev trc ,00000] db_con_init called 289 0.001864
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 311 0.002175
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 32 0.002207
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 327 0.002534
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
User | Count |
---|---|
89 | |
10 | |
9 | |
9 | |
9 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.