on 09-28-2011 2:52 PM
Hello all,
I installed a SAP system ECC6 EHP4 ready on Linux and Oracle 11gR2. The
central instance and the database are not on the same server and we use
virtual hostname.
When we want to upgrade in EHP4 with SAPehpi, we had an error in the
phase "MAIN_SHADOW/START_SHDI_FIRST".
Apparently, the shadow instance
tried to start but without success!
I found the SAP note 525677 but the solution for this error is not in
this SAP note.
In the dev_w0 file, this error, i have :
"ORA-12154: TNS:could not resolve the connect identifier specified"
But I don't understand why this error occurred because our SAP instance
is running and the database also.
In DEVTRACE.LOG,
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 4096 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 1021 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13382]
Wed Sep 28 15:14:54 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1682]
***LOG Q0K=> DpMsAttach, mscon ( ppdsap-rtci) [dpxxdisp.c 12696]
use SAPLOCALHOST=<ppdsap-rtci> as internal hostname
DpStartStopMsg: send start message (myname is >ppdsap-rtci_UR1_02 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
ERROR => DpWPCheck: W0 (pid 11524) died (severity=0, status=65280) [dpxxdisp.c 15884]
child (pid=11524) exited with exit code 255
my types changed after wp death/restart 0x1f --> 0x1e
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.*** ERROR => DpWPCheck: W0 (pid 11524) died (severity=0, status=0) [dpxxdisp.c 15884]
my types changed after wp death/restart 0x1e --> 0x18
ERROR => DpWPCheck: W1 (pid 11525) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W2 (pid 11526) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W3 (pid 11527) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W4 (pid 11528) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W5 (pid 11529) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W6 (pid 11530) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W7 (pid 11531) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W8 (pid 11532) died (severity=0, status=65280) [dpxxdisp.c 15884]
child (pid=11532) exited with exit code 255
ERROR => DpWPCheck: W9 (pid 11533) died (severity=0, status=65280) [dpxxdisp.c 15884]
child (pid=11533) exited with exit code 255
ERROR => DpWPCheck: W10 (pid 11534) died (severity=0, status=65280) [dpxxdisp.c 15884]
child (pid=11534) exited with exit code 255
ERROR => DpWPCheck: W11 (pid 11535) died (severity=0, status=65280) [dpxxdisp.c 15884]
child (pid=11535) exited with exit code 255
*n STARTSFI.LOG
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110928151352")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '10', GwService = 'sapgw10'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPSR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="UR1", Nr="02", GwHost="ppdsap-rtci", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="UR1", Nr="02", GwHost="ppdsap-rtci", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ399 Stopping shadow instance
4 ETQ399 2011/09/28 15:13:52: put_execute: (sapcontrol) forkpid:11396
4 ETQ399 2011/09/28 15:14:02: put_execute: (sapcontrol) forkpid:11418
4 ETQ359 RFC Login to: System="UR1", Nr="02", GwHost="ppdsap-rtci", GwService="sapgw02"
2 ETQ231 RFC Login failed
--> I already install EHP4 in DEV system without problem, and with same memory parameters..
Please can you help us to resolve this error ?
Thanks a lot
Edited by: Nor Goudjil on Sep 28, 2011 3:45 PM
Edited by: Nor Goudjil on Sep 28, 2011 3:52 PM
Dear all,
please look at the output of:
sapcontrol -nr 02 -function GetEnvironment
Please look for the Oracle - environmentvariables in this output. If there are no ORA - variables, please check the login - scripts like .cshrc. I think, the reason is described in this note: 1301712 UNIX sapstartsrv: Determining the environment
Hope this helps
regards
Uwe
Edited by: Uwe Kaden on Oct 13, 2011 9:31 AM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
are you using hostname in tnsnames.ora? pinging the hostname directed you to the correct database server? You can try to change the hostname into ip address to help narrowed the problem possibility.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI,
Is your shadow instance running. ?
If not, Try starting it using "R3up startshd" from EHPI directory.
Also check if listener is running (tnsping SID)
Regards.
Rajesh Narkhede
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
As you said CI and DB are on different server, so on which host your shadow system is installed ?
Also, why are you using virtual hostname ? Is this cluster installation ?
Could you please check in listener.ora file and check on which host listener is listening on 1527 port and check whether shadow system is installed on same host or different ?
Thanks
Sunny
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Only message server, and sapcontrol are started :
ur1adm 15956 1 0 Sep28 ? 00:00:00 /usr/sap/UR1/EHPI/abap/exe/sapstartsrv pf=/usr/sap/UR1/EHPI/abap/UR1/SYS/profile/START_DVEBMGS02_ppdsap-rtci -D
ur1adm 16014 1 0 Sep28 ? 00:00:00 sapstart pf=/usr/sap/UR1/EHPI/abap/UR1/SYS/profile/START_DVEBMGS02_ppdsap-rtci
ur1adm 16055 16014 0 Sep28 ? 00:00:00 ms.sapUR1_DVEBMGS02_SHD pf=/usr/sap/UR1/EHPI/abap/UR1/SYS/profile/UR1_DVEBMGS02_ppdsap-rtci
Hi after restar, always same error :
DEV_DISP
trc file: "dev_disp.new", trc level: 1, release: "701"
-
sysno 02
sid UR1
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7010
patchlevel 0
patchno 111
intno 20020600
make: single threaded, Unicode, 64 bit, optimized
pid 17661
Thu Sep 29 20:11:19 2011
kernel runs with dp version 244000(ext=110000) (@(#) DPLIB-INT-VERSION-244000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 17661) [dpxxdisp.c 1287]
shared lib "dw_xml.so" version 111 successfully loaded
shared lib "dw_xtc.so" version 111 successfully loaded
shared lib "dw_stl.so" version 111 successfully loaded
shared lib "dw_gui.so" version 111 successfully loaded
shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ppdsap-rtci_UR1_02 <
DpShMCreate: sizeof(wp_adm) 21024 (1752)
DpShMCreate: sizeof(tm_adm) 6009216 (29896)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: allocated appc_ca_adm at 0x2afcc9a87790
DpShMCreate: allocated comm_adm at 0x2afcc9a89d10
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x2afcc9b0f9f0
DpShMCreate: allocated gw_adm at 0x2afcc9b0fa70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x2afcc9b0faa0
DpShMCreate: allocated wall_adm at 0x2afcc9b0fab0
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 4096 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 1021 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13382]
Thu Sep 29 20:11:20 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1682]
***LOG Q0K=> DpMsAttach, mscon ( ppdsap-rtci) [dpxxdisp.c 12696]
DpStartStopMsg: send start message (myname is >ppdsap-rtci_UR1_02
pStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
ERROR => DpWPCheck: W0 (pid 17663) died (severity=0, status=65280) [dpxxdisp.c 15884]
child (pid=17663) exited with exit code 255
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1a
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
ERROR => DpWPCheck: W0 (pid 17663) died (severity=0, status=0) [dpxxdisp.c 15884]
my types changed after wp death/restart 0x1a --> 0x18
ERROR => DpWPCheck: W1 (pid 17664) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W2 (pid 17665) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W3 (pid 17666) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W4 (pid 17667) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W5 (pid 17668) died (severity=0, status=65280) [dpxxdisp.c 15884]
child (pid=17668) exited with exit code 255
ERROR => DpWPCheck: W6 (pid 17669) died (severity=0, status=0) [dpxxdisp.c 15884]
ERROR => DpWPCheck: W7 (pid 17670) died (severity=0, status=0) [dpxxdisp.c 15884]
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Sep 29 20:11:30 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Sep 29 18:11:30 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 17663 Ended no 2 0 0
1 DIA 17664 Ended no 2 0 0
2 DIA 17665 Ended no 2 0 0
3 DIA 17666 Ended no 2 0 0
@
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Sep 29 20:11:35 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ppdsap-rtci_UR1_02 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing proc (17662) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
kill(17662,0) -> ESRCH: process died
DpStartStopMsg: send stop message (myname is >ppdsap-rtci_UR1_02 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=ppdsap-rtci_UR1_02 , sapsysnr= 2, hostname=ppdsap-rtci
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelPSet: set events of sock 13 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelPRemove: removed sock 13 (pos=3)
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpSemRq: key: 2, units: 1, timeout: -1
DpSemRel: key: 2, units: 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 😎
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 13
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EsCleanup destroy slot 0
<EsMap: unlink /SAP_ES_02_000
EsCleanup destroy slot 1
<EsMap: unlink /SAP_ES_02_001
EsCleanup destroy slot 2
<EsMap: unlink /SAP_ES_02_002
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x55d9190 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmDelete( 13 )
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0x7fff0bf6abb0 )
ShmProtect( 1, 3 )
ShmProtect( key 1 valid )
ShmProtect( slot Index 0 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x2afcc92a5000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0x7fff0bf6abb0 )
ShmProtect( 2, 3 )
ShmProtect( key 2 valid )
ShmProtect( slot Index 1 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 2 prot 3/0 done
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0x7fff0bf6ab90 )
ShmProtect( 62, 3 )
ShmProtect( key 62 valid )
ShmProtect( slot Index 61 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 62 prot 3/0 done
ShmCreate( 62, 0, 2, -> 0x0x2afdcfad7000 )
MpiCleanup() -> 0
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 8 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 15 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 65 ) = 0740 (octal)
SemKeyPermission( 66 ) = 0740 (octal)
SemKeyPermission( 67 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 70 ) = 0740 (octal)
SemKeyPermission( 72 ) = 0740 (octal)
removing Semaphore-Management
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 0 (type=2)
NiICloseHandle: shutdown and close hdl 0 / sock 10
DpDelSocketInfo: del info for socket 1 (type=1)
NiICloseHandle: shutdown and close hdl 1 / sock 11 - sock 12
***LOG Q05=> DpHalt, DPStop ( 17661) [dpxxdisp.c 11531]
shutdown completed - server stopped ***
Good Bye .....
dev_ms
trc file: "dev_ms", trc level: 1, release: "701"
-
[Thr 47155120060544] Thu Sep 29 20:11:18 2011
[Thr 47155120060544] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7010
patchlevel 0
patchno 92
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 17660
[Thr 47155120060544] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 17660) [msxxserv_mt. 1853]
[Thr 47155120060544] SigISetDefaultAction : default handling for signal 17
[Thr 47155120060544] load acl file = /usr/sap/UR1/EHPI/abap/UR1/SYS/global/ms_acl_info
[Thr 47155120060544] MsGetOwnIpAddr: my host addresses are :
[Thr 47155120060544] 1 : [172.25.177.232] ppdsap-rtci (HOSTNAME)
[Thr 47155120060544] 2 : [127.0.0.1] localhost.localdomain (LOCALHOST)
[Thr 47155120060544] 3 : [172.25.177.167] ppdlsap001.si3si.int (NILIST)
[Thr 47155120060544] MsHttpInit: full qualified hostname = ppdsap-rtci.si3si.int
[Thr 47155120060544] HTTP logging is switch off
[Thr 47155120060544] MsHttpOwnDomain: own domain[1] = si3si.int
[Thr 47155120060544] ms/icf_info_server : deleted
[Thr 47155120060544] *** I listen to port 3602 (3602) ***
[Thr 47155120060544] CUSTOMER KEY: >N0359475246<
[Thr 47155120060544] build version=701.2009.12.02
[Thr 47155120060544] Thu Sep 29 20:11:35 2011
[Thr 47155120060544] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from
ppdsap-rtci_UR1_02 [msxxserv_mt. 4731]
[Thr 47155120060544] Thu Sep 29 20:21:56 2011
[Thr 47155120060544] *** ERROR => MsSCheckConnections: no response from client C1 (127.0.0.1) after 30
0 secs received [msxxserv_mt. 3217]
[Thr 47155120060544] *** ERROR => MsSCheckConnections: disconnect now [127.0.0.1] [msxxserv_mt. 3221]
dev_wo
rc file: "dev_w0", trc level: 1, release: "701"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 02
M sid UR1
M systemid 390 (AMD/Intel x86_64 with Linux)
M relno 7010
M patchlevel 0
M patchno 111
M intno 20020600
M make: single threaded, Unicode, 64 bit, optimized
M pid 17663
M
M
M Thu Sep 29 20:11:19 2011
M kernel runs with dp version 244000(ext=110000) (@(#) DPLIB-INT-VERSION-244000-UC)
M length of sys_adm_ext is 576 bytes
M ThInit: rdisp/cleanup_after_crash = 1
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 17663) [thxxhead.c 1346]
M ThInit: running on host ppdsap-rtci
M calling db_connect ...
B Loading DB library '/usr/sap/UR1/EHPI/abap/exe/dboraslib.so' ...
B Library '/usr/sap/UR1/EHPI/abap/exe/dboraslib.so' loaded
B Version of '/usr/sap/UR1/EHPI/abap/exe/dboraslib.so' is "700.08", patchlevel (0.110)
C Oracle Client Version: '10.2.0.4.0', (dbsl 701 140910)
C application info callback registered
C Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.UTF8'
C Logon as OPS$-user to get SAPSR3SHD's password
Connecting as /@UR1 on connection 0 (nls_hdl 0) ... (dbsl 701 140910)
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
C 0 UTF8 0x19a97140 0x19a9ec40 0x19ab0ee8
C Attaching to DB Server UR1 (con_hdl=0,svchp=0x19ab0e18,srvhp=0x19ab2238)
C
C Thu Sep 29 20:11:20 2011
C OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
C ORA-12154: TNS:could not resolve the connect identifier specified
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 11437]
C SAPUSER or connect error 99=DBSL_ERR_DB, oerr=12154.
B ***LOG BV3=> severe db error 12154 ; work process is stopped [dbsh#2 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error 12154 performing CON [dblink#4 @ 433] [dblink 0433 ]
B ***LOG BY0=> ORA-12154: TNS:could not resolve the connect identifier specified [dblink#4 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1505]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10651]
M
M Info for wp 0
M
M pid = 17663
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 262]
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 17663) [dpuxtool.c 269]
Hello,
If we check 'R3trans -d' , what trans.log says ?
Thanks
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.