on 09-19-2011 9:02 AM
hi, experts,
Our web dispatcher B is in DMZ1, which faces internet directly, and I wanna its msserver is A which is in Core, which only in protection zone.
Now, DMZ1 has allowed Core with port 8111, but when start web dispatcher, it says error in dev_webdisp, following is details:
[Thr 1] Mon Sep 19 11:35:06 2011
[Thr 1] Profile configuration error detected, use temporary corrected setup
[Thr 1] Shared Pool 10: ipc/shm_psize_10 = 19880000 (too small)
[Thr 1] Shared Pool 10: (smaller than min requirement 150848560)
[Thr 1] started security log to file dev_icm_sec
[Thr 1] SAP Web Dispatcher running on: dga114
[Thr 1] MtxInit: 30001 0 2
[Thr 1] IcmInit: listening to admin port: 65000
[Thr 1] WLM Tag 'CWI/ICM' successfully set for this process
[Thr 1] IcrCoreInitSessionTable: Session table initialized
[Thr 515] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set
=> do not trust any intermediary
X.509 cert data will be removed from header [http_plgrt_m 730]
[Thr 515] HttpExtractArchive: files from archive /usr/sap/CWI/SYS/exe/run/wdispadmin.SAR in directory /usr/sap/CWI/W05/data/icmanroo
t are up to date
[Thr 515] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=0, flags=4101) for /sap/admin:0
[Thr 515] CsiInit(): Initializing the Content Scan Interface
[Thr 515] IBM RS/6000 with AIX (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 515] CsiInit(): CSA_LIB = "/usr/sap/CWI/SYS/exe/run/libsapcsa.o"
[Thr 515] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=1, flags=12293) for /:0
[Thr 515] HttpSubHandlerAdd: Added handler HttpWebDispHandler(slot=2, flags=28677) for /:0
[Thr 515] Started service 8005 for protocol HTTP on host "dga114"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
[Thr 1] IcmCreateWorkerThreads: created worker thread 0
[Thr 1] IcmCreateWorkerThreads: created worker thread 1
[Thr 1] IcmCreateWorkerThreads: created worker thread 2
[Thr 1] IcmCreateWorkerThreads: created worker thread 3
[Thr 1] IcmCreateWorkerThreads: created worker thread 4
[Thr 1] IcmCreateWorkerThreads: created worker thread 5
[Thr 1] IcmCreateWorkerThreads: created worker thread 6
[Thr 1] IcmCreateWorkerThreads: created worker thread 7
[Thr 1] IcmCreateWorkerThreads: created worker thread 8
[Thr 1] IcmCreateWorkerThreads: created worker thread 9
[Thr 3343] IcmWatchDogThread: watchdog started
[Thr 773] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 12
(SI_ECONN_REFUSE/79; I4; ST; 10.180.225.107:8111) [nixxi.cpp 2845]
[Thr 773] *** ERROR => Connection request from (-1/65535/0) to host: dga107, service: 8111 failed (NIECONN_REFUSED) [icxx
conn_mt.c 2759]
[Thr 773] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 5284]
[Thr 773] *** ERROR => Could not connect to SAP Message Server at dga107. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2634]
[Thr 773] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2635]
[Thr 773] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2636]
Do you have any suggestion to solve such problem?
and in DMZ1, may I telnet Core 8111?
Thanks a lot!
BestRegards,
Lily
Hi LiLi,
Please check with your network team whether DMZ is allowing the calls from port 8111.
one more thing:
Thr 1 Mon Sep 19 11:35:06 2011
Thr 1 Profile configuration error detected, use temporary corrected setup
Thr 1 Shared Pool 10: ipc/shm_psize_10 = 19880000 (too small)
Thr 1 Shared Pool 10: (smaller than min requirement 150848560)
increase ipc/shm_psize. this is not required if ur on iseries.
Regards,
Srihari
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi,Srihari,
We check the connection what you mentioned.DMZ1 is OK for Core and Port 8111.We open 8111 in Core as telnet port too. I try to use such command:
dga114:cwiadm 9> sapwebdisp -bootstrap
SAP Web Dispatcher Bootstrap
============================
This bootstrap will perform the following steps:
1. create profile file "sapwebdisp.pfl"for SAP Web Dispatcher (if not already existing)
2. create user for web based administration in file "icmauth.txt"(if not already exisiting)
3. start SAP Web Dispatcher with the created profile
After the bootstrap you can use the web based administration
Generating Profile "sapwebdisp.pfl"
Hostname of Message Server (rdisp/mshost): dga107
HTTP Port of Message Server (ms/http_port): 8111
Checking connection to message server...
ERROR: Illegal data received (no HTTP?) -
please check that 8111 is really the HTTP port of the Message Server
....
and I think the parameter doesn't matter about this problem, does it?
Thanks for your reply.
Best Regards,
Lily
Hi Lily,
The paramater is not related to this.
You need to provide the HTTP port insted of 8111.
set the http port for ms/http_port.
Please refer http://help.sap.com/saphelp_nwpi711/helpdata/en/48/8fe37933114e6fe10000000a421937/frameset.htm for addtional info on Webdispatcher.
Regards,
Srihari
Edited the link ....
Edited by: Srihari Rao on Sep 19, 2011 6:02 PM
Morning,Srihari
I'm sorry, I'm very puzzled What is HTTP Port? I think ms/http_port is an unused port at will, isn't it?
In Web dispatcher, parameters is:
#----
Accesssability of Message Server
#----
rdisp/mshost = dga107
ms/http_port = 8111
#----
SAP Web Dispatcher Ports
#----
icm/server_port_0 = PROT=HTTP,PORT=80$$
Need I set these parameters too?
icm/server_port_0 PROT=HTTP,PORT=80$$,TIMEOUT=1200,PROCTIMEOUT=2400
ms/server_port_0 PROT=HTTP,PORT=81$$
Thanks very much!
Best Regards,
Lily
User | Count |
---|---|
101 | |
13 | |
13 | |
11 | |
11 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.