New To XI

[Former Member]

Hi friends,

I habeeb,I am basically BW consulatant,But at the movement i want learn XI,please send me good links for reference thank you,

habeeb

habeebsap@googlemail.com

[former_member181959]

hi Kareen,

please find the links below.

SAP XI Real Time Scenarios:

Must Read:

/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i

/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii

/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii

XI Fundamentals

/thread/51336 [original link is broken]

http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm

hope this helps.

_kvr

[Former Member]

Hi Habeeb

It is very good to know about your Interest on SAP NetWeaver.

The decision which you took is very good and you would have very good career growth.

As you said you have good BW back ground it helps you a lot to achieve your desires in SAP NetWeaver.

I would like to suggest you for the following things:

1) If you have core java knowledge is enough to learn XI.

2)It would be good if you have multiple skill set in SAP.

3)you can learn basics of xml,webservice and the other topics which are necessary of XI after you enter into XI.I do not think knowing these concepts are not difficult.

So,I would suggest you to go ahead and learn XI.

Please find the below links for XI Fundamentals

/thread/51336 [original link is broken]

http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm

[Former Member]

If you have confidence in Java, XSL, SOAP, webservices then XI is better option.

But if you are confident only in ABAP, then i would suggest you stick to BW.

Because whichever field you wanna work, you should be confident. In XI you need to learn a lot but on XI side you may have to have sound knowledge in Java, SOAP, XSL etc.

--Archana

[Former Member]

Hi Habeeb,

First i would like to welcome to the fascinating world of XI. Just adding on to the wonderful exercises that others have provided, i just thought i will tell you a little more about its basics and also more on its installation.

The best way to learn XI as you know would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.

First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.

First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.

You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.

Then under the name space which you want, you go on to define your data types, message types and message interfaces.

Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.

Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.

You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once you’re done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.

You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.

Also I would suggest this link on SAP help for any info that you want on XI,

http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

Further, this thread deals with everything that is needed for a starter on XI. Do check them out,

/message/527697#527697 [original link is broken]

And after you are done with the documentation probably you can go through this scenario,

Also check the following threads which might help you a little more,

Also for more info related to XI go through these links:

XI -Starter

http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm

SAP XI - Where to Find Information

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20...

All the information you need in XI :

http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm

To understand the architecture of XI, Please go through this link:

http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

You can also go through the url for Elearning :

https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning

Following is the link for 'how to guides', A step by step guide to create scenarios:

https://websmp201.sap-ag.de/nw-howtoguides

XI is all about configuration of Adapters, to learn more please go through this link:

http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm

One of the most powerful feature of XI, Business Process Management:

http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm

How the messages are delivered through XI:

http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm

Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.

For help on this scenario go through this blog it is in two parts thus I am providing both links below:

/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1

/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

XI Cerification

/thread/25311 [original link is broken]

For XI in General:

http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

Now lets see the installation of SAP XI,

Follow these steps while installing XI:

1. Windows server or advanced server with latest service patch.

2. IE 6.0 with latest service patch

3. Install Microsoft office and winzip, acrobat

4. Install JDK with version 1.4.2_03 or above with the corresponding JVM

5. Install the SAP GUI 6.20

6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.

7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.

8. Copy the dumps of following DVDs into the installation drive.

• Installation Master DVD

• Installation Export

• Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW

• SAP Web As Java

9. Start the installation from the DVD dump Installation Master DVD.

10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.

U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)

u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)

or you can even go through this weblog which clearly talks to you about XI installation

In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.

At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.

U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.

In simple words regarding learning XI, there is an abundance of information on SDN and help.sap.com…. So I think it will be better for you to search information there rather than me just providing you links….which will just go on and on and on….so I felt it is better for you to go and search so that not only you get information on SAP XI but also explore SDN in its real sense.

Following are the links to weblogs which will help to develop the basic scenarios.

/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File

/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File

/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC

/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy

/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1

/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2

/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail

/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1

/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2

/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address

/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI

/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM

/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM

/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM

/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally

/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder

/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc

/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI

/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process

/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI

http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI

/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration

/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config

/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script

/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI

/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping

/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options

/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File

/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces

/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14

/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine

/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I

/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter

/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP

I hope it helps.....

Regards,

Abhy

[Former Member]

Hi,

I have sent u some good docs.

rgds,

latheesh

[Former Member]

Hello Latheesh,

What is ur email?. Please send me ....

I need your help....

mysapsecid@yahoo.com

Regards

Sunny

[Former Member]

Hi Habeeb,

Please start with this......

http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

Further, this thread deals with everything that is needed for a starter on XI. Do check them out,

/message/527697#527697 [original link is broken]

And after you are done with the documentation probably you can go through this scenario,

Also check the following threads which might help you a little more,

Also for more info related to XI go through these links:

XI -Starter

http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm

SAP XI - Where to Find Information

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20...

All the information you need in XI :

http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm

To understand the architecture of XI, Please go through this link:

http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

You can also go through the url for Elearning :

https://www.sdn.sap.com/sdn/elearning.sdn

https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning

Following is the link for 'how to guides', A step by step guide to create scenarios:

https://websmp201.sap-ag.de/nw-howtoguides

XI is all about configuration of Adapters, to learn more please go through this link:

http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm

One of the most powerful feature of XI, Business Process Management:

http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm

How the messages are delivered through XI:

http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm

Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.

For help on this scenario go through this blog it is in two parts thus I am providing both links below:

/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1

/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

XI Cerification

/thread/25311 [original link is broken]

For XI in General:

http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

Also take a look at these threads dealing with the same question :

Hope you have a great time learning XI!

cheers,

Prashanth

[Former Member]

Hi ,

check this link...get lot of info..

sekhar