on 09-03-2011 4:18 PM
Hello
I'm doing the upgrade solman to 7.1
SOLMANUP stop at the step
PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION
With the following message
Severe error(s) occured in phase PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION!
Last error code set: Disassembling patch queue failed rc = 3, reason = 'Error when creating cofile for transport request SAPK-100AGINCTSPLUG'
I checked the permissions and they are fine, because in the directory /usr/sap/S0A/SOLMANUP/abap/cofiles there are already a lot of files.
On the drive there is enough space (8GB)
I download the K-100AGINCTSPLUG.SAR again to check if the file was corrupted and it was not.
If I manually decompress the file I do not get a data file end a cofile but EPS/in/...PAT
Any hint would be very welcomed!
Thank you and regards,
Tommaso
PS I already read the note
Note 1576955 - cannot create cofile during Upgrade/EHPI/SPAM
but the libraries are already deployed (with different versions)
SOLMANUP/abap/log/SPDA_EHP_INCLUSION.LOG
1 ETN214X."**************************************************"
1 ETN250 Start of phase: "'Disassemble Queue'"
1 ETN252 Start date: "03.09.2011"
1 ETN253 Start time: "15:39:25"
1 ETN214 ."**************************************************"
2 ETN234XDisassemble OCS package "SAPK-710BGINSTBCO" ...
3 ETN235 ... Data and cofiles for OCS package "SAPK-710BGINSTBCO" successfully created
2 ETN234XDisassemble OCS package "SAPK-01NS2INSSA" ...
3 ETN235 ... Data and cofiles for OCS package "SAPK-01NS2INSSA" successfully created
2 ETN234XDisassemble OCS package "SAPK-101AGINSOCO" ...
3 ETN235 ... Data and cofiles for OCS package "SAPK-101AGINSOCO" successfully created
2 ETN234XDisassemble OCS package "SAPK-100AGINCTSPLUG" ...
2EETN514 Error when creating cofile for transport request "SAPK-100AGINCTSPLUG"
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Disassemble Queue'"
1 ETN254 End date: "03.09.2011"
1 ETN255 End time: "15:39:45"
1 ETN214 ."**************************************************"
Edited by: Tommaso Cereghetti on Sep 3, 2011 6:23 PM
Thank you so much for posting this. Your solution worked perfectly.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
In our case upgrade tp, R3trans to last version
Note 1576955 after upgrade tp also neded? because according note 1576955 $(DIR_PUT)/exe/tp -V 2>&1
say that:
Could not open the ICU common library.
The following files must be in the path described by
the environment variable "LD_LIBRARY_PATH":
libicuuc.so.40, libicudata.so.40, libicui18n.so.40 [nlsui0.c 1540] pid = 2510
thnx and best regards, friends!
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Yestarday I had the same problem. The solution is to update R3trans and tp up to last version. I've update them to 720 patch 107. It helps.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Please check if \usr\sap\trans\cofile has enough space and that the permissions are correct. The PAT file wil be used by a programm that is ran in the ABAP and hence the permissions to create the cofiles must be according the user running the program (<sid>adm on Unix).
I saw likewise errors when /usr/sap/trans was mounted as an NFS directory and the same file has been created under .../cofiles with another user (from another upgrade of the same landscape).
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Solution:
Debugging SPDA_DISASSEMBLE_QUEUE you get the command:
/usr/sap/S0A/SOLMANUP/abap/exe/tp PF=/usr/sap/S0A/SOLMANUP/abap/bin/TPPARAM CREATECOFILE SAPK-100AGINCTSPLUG -s S0A
executing the comand in a shell
This is /usr/sap/S0A/SOLMANUP/abap/exe/tp version 376.03.39 (release 701, unicode enabled)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
This is /usr/sap/S0A/SOLMANUP/abap/exe/R3trans version 6.19 (release 720 - 27.07.10 - 13:40:00).
unicode enabled version
2EETW000 extraction of a plugin which is included in the data file needs at least R3trans version 6.20, this is 6.19.
2EETW000 extraction of a plugin which is included in the data file needs at least R3trans version 6.20, this is 6.19.
2EETW000 extraction of a plugin which is included in the data file needs at least R3trans version 6.20, this is 6.19.
2EETW000 extraction of a plugin which is included in the data file needs at least R3trans version 6.20, this is 6.19.
/usr/sap/S0A/SOLMANUP/abap/exe/R3trans finished (0008).
tp finished with return code: 8
meaning:
A tool used by tp produced errors
we see that in the SOLMANUP SAP has delivered an old version of R3trans
Hi,
I ran into the same error. If I execute the command from your last Post I get the following error:
This is /tmp/SOLMANUP/abap/exe/R3trans version 6.19 (release 720 - 27.07.10 - 13:40:00).
unicode enabled version
2EETW152 Cannot open file "/tmp/SOLMANUP/abap/data/R-100AGINCTSPLUG.SAP".
: No such file or directory
/tmp/SOLMANUP/abap/exe/R3trans finished (0012).
The file is not existent, thats correct. All the others are there. I also copied the libraries ... no effect,
Any ideas?
Regards
Mike
HI Tommaso,
they had already been in .../SOLMANUP/abap/exe/. The folder contains the following:
ls -la /tmp/SOLMANUP/abap/exe/libicu.
-rwxr-xr-x 1 soladm sapsys 8836524 2010-07-30 20:08 /tmp/SOLMANUP/abap/exe/libicudata.so.34
-rwxr-xr-x 1 soladm sapsys 1589908 2010-07-30 20:08 /tmp/SOLMANUP/abap/exe/libicui18n.so.34
-rwxr-xr-x 1 soladm sapsys 1577768 2010-07-30 20:08 /tmp/SOLMANUP/abap/exe/libicuuc.so.34
Regards
Mike
Hi,
If platform is Unix then could you confirm the second point mentioned in that note.
Also decompressing the .SAR file doesn't produce the datafile and cofile. Datafile and cofiles are generated when a transport is released. Generation of .PAT file is OK.
Thanks
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Also if I copy the libraries from /usr/sap/S0A/SOLMANUP/abap/exe, tp is using the version 30 instead of 34
/sapdb/S0A/db/lib/libicudata.so.34
/sapdb/S0A/db/lib/libicui18n.so.34
/sapdb/S0A/db/lib/libicuuc.so.34
/sapdb/clients/S0A/lib/libicudata.so.34
/sapdb/clients/S0A/lib/libicui18n.so.34
/sapdb/clients/S0A/lib/libicuuc.so.34
/sapmnt/S0A/exe/libicudata.so.30
/sapmnt/S0A/exe/libicudata.so.34
/sapmnt/S0A/exe/libicui18n.so.30
/sapmnt/S0A/exe/libicui18n.so.34
/sapmnt/S0A/exe/libicuuc.so.30
/sapmnt/S0A/exe/libicuuc.so.34
/usr/sap/S0A/DVEBMGS00/exe/libicudata.so.30
/usr/sap/S0A/DVEBMGS00/exe/libicudata.so.34
/usr/sap/S0A/DVEBMGS00/exe/libicui18n.so.30
/usr/sap/S0A/DVEBMGS00/exe/libicui18n.so.34
/usr/sap/S0A/DVEBMGS00/exe/libicuuc.so.30
/usr/sap/S0A/DVEBMGS00/exe/libicuuc.so.34
/usr/sap/S0A/DVEBMGS00/exe/old_libicu/libicudata.so.30.old
/usr/sap/S0A/DVEBMGS00/exe/old_libicu/libicui18n.so.30.old
/usr/sap/S0A/DVEBMGS00/exe/old_libicu/libicuuc.so.30.old
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/libicucnv.so.34
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/libicucnv.so.34.0
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/libicudata.so.34
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/libicudata.so.34.0
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/libicudata_cjk.so.34.0
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/libicuuc.so.34
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/libicuuc.so.34.0
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/XMLFormService/bin/libicudata.so
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/XMLFormService/bin/libicudata.so.34
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/XMLFormService/bin/libicudata.so.34.0
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/XMLFormService/bin/libicuuc.so
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/XMLFormService/bin/libicuuc.so.34
/usr/sap/S0A/DVEBMGS00/j2ee/os_libs/adssap/XMLFormService/bin/libicuuc.so.34.0
/usr/sap/S0A/SCS01/exe/libicudata.so.30
/usr/sap/S0A/SCS01/exe/libicudata.so.30.old
/usr/sap/S0A/SCS01/exe/libicui18n.so.30
/usr/sap/S0A/SCS01/exe/libicui18n.so.30.old
/usr/sap/S0A/SCS01/exe/libicuuc.so.30
/usr/sap/S0A/SCS01/exe/libicuuc.so.30.old
/usr/sap/S0A/SOLMANUP/abap/bin/libicudata.so.34
/usr/sap/S0A/SOLMANUP/abap/bin/libicui18n.so.34
/usr/sap/S0A/SOLMANUP/abap/bin/libicuuc.so.34
/usr/sap/S0A/SOLMANUP/abap/exe/libicudata.so.34
/usr/sap/S0A/SOLMANUP/abap/exe/libicui18n.so.34
/usr/sap/S0A/SOLMANUP/abap/exe/libicuuc.so.34
/usr/sap/S0A/SOLMANUP/abap/exenew/libicudata.so.34
/usr/sap/S0A/SOLMANUP/abap/exenew/libicudata.so.40
/usr/sap/S0A/SOLMANUP/abap/exenew/libicui18n.so.34
/usr/sap/S0A/SOLMANUP/abap/exenew/libicui18n.so.40
/usr/sap/S0A/SOLMANUP/abap/exenew/libicuuc.so.34
/usr/sap/S0A/SOLMANUP/abap/exenew/libicuuc.so.40
/usr/sap/SMD/exe/libicudata.so.30
/usr/sap/SMD/exe/libicui18n.so.30
/usr/sap/SMD/exe/libicuuc.so.30
User | Count |
---|---|
88 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.