on 08-26-2011 6:01 AM
Hello,
RFC SAP-OSS shows this error....
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner 'SAP-SOLMAN:sapdp99' not reached
Error Details LOCATION: SAP-Server SAP-SOLMAN_SOL_00 on host SAP-SOLMAN (wp 1)
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 104
Error Details ERROR NUMBER: 10061
Error Details ERROR TEXT: WSAECONNREFUSED: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 2845
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Aug 26 10:25:45 2011
Error Details VERSION: 38
RFC SAPOSS shows this error...
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner '192.168.0.147:sapdp99' not reached
Error Details LOCATION: SAP-Server SAP-SOLMAN_SOL_00 on host SAP-SOLMAN (wp 1)
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 112
Error Details ERROR NUMBER: 10061
Error Details ERROR TEXT: WSAECONNREFUSED: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 2845
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Aug 26 10:29:14 2011
Error Details VERSION: 38
We have done add these entries in saprouttab...
#SNC-connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.2 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.2 3389
outbound connections to <sapserv2> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3299
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
permission entries to check if connection is allowed at all
P 192.168.0.2 194.39.131.34 *
P 192.168.0.147 194.39.131.34 *
But Still not able to resolve this isse....
Please help
Thanks,
Abha
License still valid ?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
I think this problem is related to saprouter.
please check the sap router is started or not ?
I t is started then restart the saprouter and check saposs connection test:
you can use following commands to restart the sap router:
saprouter -s(stop the saprouter)
saprouter -r -V 2 -K "p:CN=SOLMAN, OU=0000491930<your cryptographic no), OU=SAProuter, O=SAP,
C=DE"(start the sap router).
Still the sap oss connection test gives errors, let me know i will tell the Problem what it is.
Regards,
Shankar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Abhasood,
I think Currently, your SNC Saprouter process is not up and running, please stop your saprouter process with command ' saprouter -s ' and restart it and after that using the following with correct User.
saprouter -r -V 2 -K "p:CN=<hostname>, OU=<distinguish Number>, OU=SAProuter, O=SAP, C=DE"
Please note that to ensure you Saprouter process is running, you must not close the command prompt screen after you started the above. Once you closed the screen, your saprouter process is stopped and your connection to SAP is dropped.
Now you can go to Sm59 check with the SAP-OSS and SAPOSS connection Logon Security Tab put the User name and Password is SUSER id .
Hope this. Please Let me know
Regards
Thomas
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
In which system you are testing the connection of SAP-OSS RFC?
If you are testing the connection in satellite system, you have to main solution manager sapms<Solman SID> entry in that system's services file. Please make sure satellite system sapms<SID> entry also maintained in Soman system's services file.
Please let me know if you have any questions.
Thanks,
Siva Kumar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Abha,
Please make sure the following parameters are set properly in transaction OSS1 (Parameter --> Technical Settings).
SAProuters at Customer Site
SAProuter1
Name: <hostname of saprouter>
IP Address: <IP of saprouter>
Instance no.: <Inst no. of saprouter>
SAProuter and SAPNet Message Server at SAP
SAProuter at SAP
Name: <sapserv1/2/3...>
IP Adress: <IP of sapserv1/2/3/..>
Instance no.: <99>
SAPNet Message Server
Name: oss001
DB Name: 001
Instance no.: 01
In RFC destination SAPOSS, Msg. Server should have the value /H/<your saprouter IP>/S/sapdp99/H/<IP of sapserv1/2/3..>/S/sapdp99/H/oss01
Please mark this message answered, if your issue is resolved.
Thanks,
Siva Kumar
Hi Dude,
Could you start SAP Router for the above command,
Please also check is the following entry " sapdp99 3299/tcp " defined
under the dirctory ...\etc\services of your Saprouter and server host ? ( sapdp00 3299/tcp )
By the way, you have confirmed that your connection was working before,
Please check with SAPOSS connection Logon and Security Tab, what you are given in User Password
Regards
Thomas
partner '192.168.0.147:sapdp99' not reached
This is plain basic... you either have not maintained the services file or the port is been blocked by the firewall....
Assuming 192.168.0.147 is the IP of your SAProuter then check that you can telnet 192.168.0.147 on port 3299 from your SAP System, if that doesn't work then is a problem with your firewall, if the telnet works then you need to maintain the sapdp99 in the services file.
Regards
Juan
Hi All,
SAPRouter is working fine but dev_rout files shows this
nihsl-init: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 entries at 01530048)
NiIInit: host-/servbuffer alreay initialized
SAP Network Interface Router, Version 37.11
Compiled Dec 5 2005 23:28:45
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 2
command line arg 4: -K
command line arg 5: p:CN=SCLSAPDEV-SOL, OU=0001193985, OU=SAProuter, O=SAP, C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "C:\saprouter\ntintel\sapcrypto.dll".
load shared library (C:\saprouter\ntintel\sapcrypto.dll), hdl 0
using "C:\saprouter\ntintel\sapcrypto.dll"
File "C:\saprouter\ntintel\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
<<- SncInit()==SAP_O_K
sec_avail = "true"
<<- SncSetMyName()==SAP_O_K
in: myname = "p:CN=SCLSAPDEV-SOL, OU=0001193985, OU=SAProuter, O=SAP, C=DE"
NiSetParamEx: switch NIP_CONNLOCAL off
NiSetParamEx: Set UDS path to /tmp/.sapstream%d
NiIMyHostName: hostname = 'SCLSAPDEV-SOL'
main(): pid = 15960, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
NiIInitSocket: set default settings for socket 360
NiCreateHandle: state hdl 1 / socket 360 NI_INITIAL
NiPBind: set option SOL_SOCKET-SO_REUSEADDR of socket 360 TRUE
NiSetStat: state hdl 1 NI_LISTEN
NiBufHdlInit: BufInit for hdl 1
NiIListen: listen for client requests on hdl 1
reading routtab: ./saprouttab
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '5631' = port 15.FF/5631
nihsi-getServNo: servicename '5631' = port 15.FF/5631
nihsi-getServNo: servicename '23' = port 00.17/0023
nihsi-getServNo: servicename '23' = port 00.17/0023
nihsi-getServNo: servicename '1503' = port 05.DF/1503
nihsi-getServNo: servicename '1503' = port 05.DF/1503
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
ERROR => invalid token (168*) in IPadr-string, skip line 25 [nirout.cpp 8451]
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
nihsi-getServNo: servicename '3299' = port 0C.E3/3299
nihsi-getServNo: servicename '3299' = port 0C.E3/3299
Thanks,
Abha
Hi,
Please tell me the SAPOSS and SAP-OSS connection Logon and Security Tab details.
Please try that, Set the SM59 logon & Security Tab Change Mode
SAPOSS connection --> User : OSS_RFC and Password : CPIC
SAP-OSS connection --> User: SUSER id and its password. then save it.
Saprouttab will be staying in Router folder only. You must be copy & Paste of saprouter folder also.
Then it will be working fine. Before that you need check with the saprouttab file is on Both folder ( Mandatory )
Regards
Thomas
Edited by: thomas_raja on Aug 28, 2011 7:13 AM
User | Count |
---|---|
86 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.