on 07-27-2011 5:42 PM
Dears
for my material i have activated 01,08,15 inspection type
But i need to follow the same inspection plan
for example if i make inspection for incoming,transfer and sample for a same material i need to follow the same inspection plan with MIC
1.How we can achive this ...
2.By doing this way any problem may happen in later?
Pls give you valued comments
Faisal
1.How we can achive this ...
2.By doing this way any problem may happen in later?
If you maintain the usage of all aforesaid inspection types same then its possible
Qcc3->Inspection lot creation->maintain inspection type--->01/08/15 --->Task list usage -->say 5.
Now you can create task list using usage 5 in QP01.
OnIy problem I forsee is---> you have to use "Inspection point" & sampling procedure" relevent to "sample management" if you are using 15 inspection type whereas these are not applicable to 08 & 01 inspection type.
For this I would suggest you to have same task list for 01 & 08
& New group counter task list with different usage for 15 inspection type.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Muhamed,
Itu2019s possible but I would not recommend to do so.
The reason is, this setting is at client level. We often use the same inspection types for various plants. In future if you want separate inspection parameters for the same material in another plant, it would not be possible.
Regards,
Anand
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
69 | |
14 | |
8 | |
5 | |
5 | |
5 | |
5 | |
4 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.