on 07-13-2011 2:16 PM
hi this is krishna
pasting the developer trace
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid SOL
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 278
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3424
Wed Jul 13 18:01:51 2011
kernel runs with dp version 245000(ext=110000) (@(#) DPLIB-INT-VERSION-245000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3424) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 278 successfully loaded
shared lib "dw_xtc.dll" version 278 successfully loaded
shared lib "dw_stl.dll" version 278 successfully loaded
shared lib "dw_gui.dll" version 278 successfully loaded
shared lib "dw_mdm.dll" version 278 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jul 13 18:02:03 2011
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0180.qqq.nxst) took 12 seconds
Wed Jul 13 18:02:20 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5523]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >curosol_SOL_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F3B0050, size: 6614144)
DpShMCreate: allocated sys_adm at 000000000F3B0050
DpShMCreate: allocated wp_adm at 000000000F3B2270
DpShMCreate: allocated tm_adm_list at 000000000F3B96D0
DpShMCreate: allocated tm_adm at 000000000F3B9730
DpShMCreate: allocated wp_ca_adm at 000000000F95CFB0
DpShMCreate: allocated appc_ca_adm at 000000000F962DB0
DpShMCreate: allocated comm_adm at 000000000F964CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F9EB980
DpShMCreate: allocated gw_adm at 000000000F9EBA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F9EBA30
DpShMCreate: allocated wall_adm at 000000000F9EBA40
Wed Jul 13 18:02:31 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 320
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1054) [nixxi.cpp 4424]
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Update all the details:
1) What's OS and DB versions
2) What is the Stop/Start seq that you are following
3) Is your DB up?
4) Whats the result of R3trans -dx, paste trans.log file
5) Paste the ERROR lines from dev_w0 log file
Regards,
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
os :win server 2003 64 bit
ms sql 2005
stand alone system
Thu Jul 14 14:10:44 2011
M kernel runs with dp version 245000(ext=110000) (@(#) DPLIB-INT-VERSION-245000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3480) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000113B0050, size: 6614144)
M DpShMCreate: allocated sys_adm at 00000000113B0050
M DpShMCreate: allocated wp_adm at 00000000113B2270
M DpShMCreate: allocated tm_adm_list at 00000000113B96D0
M DpShMCreate: allocated tm_adm at 00000000113B9730
M DpShMCreate: allocated wp_ca_adm at 000000001195CFB0
M DpShMCreate: allocated appc_ca_adm at 0000000011962DB0
M DpShMCreate: allocated comm_adm at 0000000011964CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000119EB980
M DpShMCreate: allocated gw_adm at 00000000119EBA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000119EBA30
M DpShMCreate: allocated wall_adm at 00000000119EBA40
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
M
M Thu Jul 14 14:10:45 2011
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: rdisp/cleanup_after_crash = 1
M ThInit: running on host curosol
M calling db_connect ...
B Loading DB library 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.278)
C Callback functions for dynamic profile parameter registered
C Thread ID:2884
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 278
C patchcomment Remove default for DDLOG identity column (1513170)
C np:(local) connection used on CUROSOL
C CopyLocalParameters: dbuser is 'sol'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error -1 performing CON [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> Login failed for user 'CUROSOL\SAPServiceSOL'. [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error -1 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> Login failed for user 'CUROSOL\SAPServiceSOL'. [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1503]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10632]
M
M Info for wp 0
pid = 3480
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server curosol_SOL_00 on host curosol (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jul 14 14:10:45 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10852
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 262]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3480) [dpnttool.c 333]
my db is up
the r3trans status is
D:\usr\sap\SOL\SYS\exe\uc\NTAMD64>r3trans -d
This is r3trans version 6.14 (release 700 - 23.07.10 - 09:23:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
Hi Krishna,
Checked the Log u pasted
"***LOG GZZ=> 2 possible network problems detected "
It seems to be problem with Listner, Can please goto -> services.msc -> start LISTNER
and then restart the system. If you are still facing the issue. Please please DEV_W0 log for further analysis.
Thanks,
Sandeep Singh DS
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Krishna,
Are you on a stand alone instance or distribute ?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Check the dev_w0 trace files for more information.
Regards,
Subhash
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
the file is
-
trc file: "dev_w0", trc level: 1, release: "700"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 00
M sid SOL
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 278
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3480
M
M
M Thu Jul 14 14:10:44 2011
M kernel runs with dp version 245000(ext=110000) (@(#) DPLIB-INT-VERSION-245000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3480) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000113B0050, size: 6614144)
M DpShMCreate: allocated sys_adm at 00000000113B0050
M DpShMCreate: allocated wp_adm at 00000000113B2270
M DpShMCreate: allocated tm_adm_list at 00000000113B96D0
M DpShMCreate: allocated tm_adm at 00000000113B9730
M DpShMCreate: allocated wp_ca_adm at 000000001195CFB0
M DpShMCreate: allocated appc_ca_adm at 0000000011962DB0
M DpShMCreate: allocated comm_adm at 0000000011964CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000119EB980
M DpShMCreate: allocated gw_adm at 00000000119EBA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000119EBA30
M DpShMCreate: allocated wall_adm at 00000000119EBA40
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
M
M Thu Jul 14 14:10:45 2011
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: rdisp/cleanup_after_crash = 1
M ThInit: running on host curosol
M calling db_connect ...
B Loading DB library 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.278)
C Callback functions for dynamic profile parameter registered
C Thread ID:2884
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\SOL\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 278
C patchcomment Remove default for DDLOG identity column (1513170)
C np:(local) connection used on CUROSOL
C CopyLocalParameters: dbuser is 'sol'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 24466. hr: 0x8000ffff Login failed for user 'CUROSOL\SAPServiceSOL'.
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 18456, sev 0), Login failed for user 'CUROSOL\SAPServiceSOL'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 4060, sev 0), Cannot open database "SOL" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 24466]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error -1 performing CON [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> Login failed for user 'CUROSOL\SAPServiceSOL'. [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error -1 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> Login failed for user 'CUROSOL\SAPServiceSOL'. [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1503]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10632]
M
M Info for wp 0
M
M pid = 3480
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server curosol_SOL_00 on host curosol (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jul 14 14:10:45 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10852
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 262]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3480) [dpnttool.c 333]
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.