SAP Router not starting

[Former Member]

Hi

Am not able start the SAPRouter, can u plz any one guied me.

When am starting the SAPRouter am getting the ERROR as follows

-

---

trc file: "dev_rout", trc level: 1, release: "700"

-

---

command line arg 0: saprouter

command line arg 1: -r

main: pid = 2788, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)

Thu Jan 24 09:26:50 2008

reading routtab: './saprouttab'

• ERROR => SNC field without SNC active, skip line 12 http://nirout.cpp 7767

• ERROR => SNC field without SNC active, skip line 16 http://nirout.cpp 7767

• ERROR => SNC field without SNC active, skip line 17 http://nirout.cpp 7767

• ERROR => SNC field without SNC active, skip line 22 http://nirout.cpp 7767

• ERROR => SNC field without SNC active, skip line 25 http://nirout.cpp 7767

• ERROR => SNC field without SNC active, skip line 30 http://nirout.cpp 7767

Regards

Basis Team

[Former Member]

Hi 
> 
> Am not able start the SAPRouter, can u plz any one guied me. 
> 
> When am starting the SAPRouter am getting the ERROR as follows
> 
> -
> trc file: "dev_rout", trc level: 1, release: "700"
> 
> -
> 
> 
> command line arg 0: saprouter
> command line arg 1: -r
> main: pid = 2788, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
> 
> Thu Jan 24 09:26:50 2008
> reading routtab: './saprouttab'
> *** ERROR => SNC field without SNC active, skip line 12 http://nirout.cpp 7767
> *** ERROR => SNC field without SNC active, skip line 16 http://nirout.cpp 7767
> *** ERROR => SNC field without SNC active, skip line 17 http://nirout.cpp 7767
> *** ERROR => SNC field without SNC active, skip line 22 http://nirout.cpp 7767
> *** ERROR => SNC field without SNC active, skip line 25 http://nirout.cpp 7767
> *** ERROR => SNC field without SNC active, skip line 30 http://nirout.cpp 7767
> 
> Regards
> Basis Team

check your SNC library (sapcrypto.dll). Is it loaded succesfully?

Best regards,

Orkun Gedik

Edited by: Orkun Gedik on Jul 7, 2011 11:48 PM

[markus_doehr2]

> Thu Jan 24 09:26:50 2008

> reading routtab: './saprouttab'

> *** ERROR => SNC field without SNC active, skip line 12 http://nirout.cpp 7767

> *** ERROR => SNC field without SNC active, skip line 16 http://nirout.cpp 7767

> *** ERROR => SNC field without SNC active, skip line 17 http://nirout.cpp 7767

> *** ERROR => SNC field without SNC active, skip line 22 http://nirout.cpp 7767

> *** ERROR => SNC field without SNC active, skip line 25 http://nirout.cpp 7767

> *** ERROR => SNC field without SNC active, skip line 30 http://nirout.cpp 7767

Please post your saprouttab.

Markus

[Former Member]

Hi markus ,

We are facing the problem after we updated the License according to this link

http://wiki.sdn.sap.com/wiki/display/Basis/HowtorenewtheSAPRouterlicense

There was no error during the Router license renewal .

Please find the below saprouttab file.

-

---

-

---

KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *

1. SNC-connection from SAP to local R/3-System for support

2. R/3 Production - R/3

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" sapprod 3201

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mghsapa03p 3201

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa03p 3208

1. SNC-connection from SAP to local R/3-System for HTTP Access

2. R/3 Production - HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mghsapa03p 8080

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa03p 8080

1. R/3 Test - R/3

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SAPQA 3221

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa03n 3227

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapb03n 3228

#R/3 Test HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SAPQA 8080

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa03n 8080

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapb03n 8080

1. R/3 Dev - R/3

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SAPQDEV 3231

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa03d 3237

#R/3 Dev HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SAPQDEV 8080

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa03d 8080

#----

---

1. BI Production - R/3

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mghsapa04p 3203

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa04p 3205

1. BI Production - HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mghsapa04p 8080

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa04p 8080

1. BW Test

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa04n 3223

1. BW Test HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa04n 8080

1. BW Dev

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa04n 3233

1. BW Dev HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" Mmhsapa04n 8080

#----

---

1. SOLMAN Production - R/3

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa05p 3200

1. SOLMAN Production - HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa05p 8080

1. SOLMAN Production - J2EE

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa05p 50000

#----

---

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mghsapa05p 3200

Production - HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mghsapa05p 8080

Production - J2EE

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mghsapa05p 50000

#----

---

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa05d 3230

SOLMAN Dev - HTTP

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa05d 8080

SOLMAN Dev - J2EE

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" mmhsapa05d 50000

#----

---

1. Access from Local Network to SAP router

P 11.129.89.68 194.39.131.34 3299

P 11.129.73.39 194.39.131.34 3299

P 11.129.73.34 194.39.131.34 3299

P 11.129.89.103 194.39.131.34 3299

P 11.129.89.34 194.39.131.34 3299

P 11.129.89.113 194.39.131.34 3299

P 11.129.89.148 194.39.131.34 3299

#SAP servers

P 11.141.34.8 194.39.131.34 3299

P 11.141.34.9 194.39.131.34 3299

P 11.141.34.10 194.39.131.34 3299

P 11.141.34.11 194.39.131.34 3299

P 11.141.34.12 194.39.131.34 3299

P 11.141.34.13 194.39.131.34 3299

P 11.141.34.141 194.39.131.34 3299

P 11.141.34.142 194.39.131.34 3299

P 11.141.34.145 194.39.131.34 3299

P 11.141.34.143 194.39.131.34 3299

P 11.141.34.139 194.39.131.34 3299

P 11.141.34.146 194.39.131.34 3299

#----

---

D * * *

-

---

-

---

regards

Basis Team

[Former Member]

Hi,

I could see that you are just executing saprouter -r, please execute with full syntax

\saprouter directory\saprouter -r -G routerlog -S 3299 -K "p:<distinguish name>"

For eg:

\saprouter directory\saprouter -r -G routerlog -S 3299 -K "p:CN=hostname, OU=12345, OU=saprouter, O=SAP, C=DE"

-K will saprouter to start with SNC and load cryptographic lib

Regards,

SBK

[Former Member]

Hi SBK ,

We have run the command saprouter -r -G routerlog -S 3299 -K "p:CN=hostname, OU=12345, OU=saprouter, O=SAP, C=DE"

But we are getting the error , SNC processing failed , SncsetMyNameU

We have also checked sapgenpse get_my_name -v -n Issuer . Everything is OK .

We have renewed the license with a diffrent OS user , not with the one which did the SAP Router Installation . Is that the reason we are facing the errors ?

Regards

Basis Team

[Former Member]

Hi,

Did you replace CN=hostname, OU=12345, OU=saprouter, O=SAP, C=DE with your company's distinguish name.

Ensure that you are starting saprouter on the same hostname which you registered with SAP and also the public ip should be same.

We have renewed the license with a diffrent OS user , not with the one which did the SAP Router Installation . Is that the reason we are facing the errors ? 

Can you be more clear on the above sentence.

Regards,

SBK

[Former Member]

Hi ,

Yes we did replace the /CN=hostname, OU=12345, OU=saprouter, O=SAP, C=DE/ with company's distinguished name . We did start saprouter on the same hostname which we registered with SAP and also the public ip is same.

We installed the SAPROUTER with a diffrent O/S user and now renewing the SAP license with a new user with admin privelage. The user with which SAP router was installed doesnot exist in the domain currently .

Regards

Basis Team

[Former Member]

Hi,

Initially during saprouter configuration, you would execute a command

sapgenpse seclogin -p local.pse -O <username>

So you should try to start the router the username which you entered in the above command. Ensure that you start with the same else it will fail.

If that user was deleted, execute the above command with new user and it will update ur local.pse file.

Regards,

SBK