on 06-15-2011 3:58 PM
Hi All,
I have done all the necessary steps and completed successfully. But when I try to start saprouter using this command saprouter -r -K "p:CN=CORONA391,OU=0001200552,OU=SAProuter,O=SAP,C=DE" I am getting the following error.
trcfile dev_rout
*****************************************************************************
*
ERROR SNC processing failed:
SncInit
*
TIME Wed Jun 15 20:25:52 2011
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -17
MODULE nisnc.c
LINE 646
DETAIL NiSncInit: sncrc=-1
COUNTER 3
*
*****************************************************************************
Thanks & Regards
Uday
Thank you very much Markus, I have opened new thread for SAPROUTTAB file.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi All,
This is dev_rout file
-
trc file: "dev_rout", trc level: 1, release: "701"
-
Wed Jun 15 20:02:49 2011
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -K
command line arg 3: p:CN=CORONA391,OU=0001200552,OU=SAProuter,O=SAP,C=DE
SncInit(): Initializing Secure Network Communication (SNC)
AMD/Intel x86_64 with Linux (st,ascii,SAP_UC/size_t/void* = 16/64/64)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "/usr/sap/saprouter/libsapcrypto.so".
ERROR => DlLoadLib: dlopen()= /usr/sap/saprouter/libsapcrypto.so: wrong ELF class: ELFCLASS32 -> DLENOACCESS (0,Success) [dlux.c 314]
ERROR => SncPDLInit(): DlLoadLib("/usr/sap/saprouter/libsapcrypto.so")=DLENOACCESS
[sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) /usr/sap/saprouter/libsapcrypto.so not loaded
[sncxxdl.0604]<<- SncInit()==SNCERR_INIT
sec_avail = "false"
ERROR => NiSncInit: SncInit failed (rc=-1) [nisnc.c 647]
ERROR => main: NiSncInit failed (rc=-17) [nirout.cpp 1219]
*****************************************************************************
*
ERROR SNC processing failed:
SncInit
*
TIME Wed Jun 15 20:02:49 2011
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -17
MODULE nisnc.c
LINE 646
DETAIL NiSncInit: sncrc=-1
COUNTER 3
*
*****************************************************************************
<<- ERROR: SncDone()==SNCERR_INIT_FIRST
Please help me in this,
Thanks in advance
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
> SncInit(): Initializing Secure Network Communication (SNC)
> AMD/Intel x86_64 with Linux (st,ascii,SAP_UC/size_t/void* = 16/64/64)
> SncInit(): Trying environment variable SNC_LIB as a
> gssapi library name: "/usr/sap/saprouter/libsapcrypto.so".
> *** ERROR => DlLoadLib: dlopen()= /usr/sap/saprouter/libsapcrypto.so: wrong ELF class: ELFCLASS32 -> DLENOACCESS (0,Success) [dlux.c 314]
for a 64bit saprouter you also need to download the 64bit sapcrypto. The saprouter ininitialization fails because the 64bit saprouter binary can't load the 32bit libsapcrypto.so.
Markus
Hi Markus,
See the below dev_rout file.
-
trc file: "dev_rout", trc level: 1, release: "701"
-
Thu Jun 16 11:24:43 2011
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -S
command line arg 3: 3298
command line arg 4: -K
command line arg 5: p:CN=CORONA391, OU=0001200552, OU=SAProuter, O=SAP, C=DE
SncInit(): Initializing Secure Network Communication (SNC)
AMD/Intel x86_64 with Linux (st,ascii,SAP_UC/size_t/void* = 16/64/64)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "/usr/sap/saprouter/libsapcrypto.so".
File "/usr/sap/saprouter/libsapcrypto.so" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
main: pid = 8787, ppid = 6312, port = 3298, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
When I execute saprouter -r -K "Distinguished name" getting the following lines
trcfile dev_rout
no logging active
But not getting out of this command. Showing the same status for a long time.
Thanks in Advance
Uday
Hi Markus,
Thanks a lot
192.168.5.15/16 --- Our servers local IPs
183.82.41.2 --- Public IP of router
3297 --- Port number of SAProuter
00, 01, 02 --- Instance numbers of SAP systems
SAProuter String in logon pad : /H/183.82.41.2/S/3297/H/
I created saprouttab file in /usr/sap/saprouter.
Following is the content in saprouttab file.
Example saprouttab
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
R/3 Server: 192.168.1.1
R/3 Instance: 00
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.1 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.5.15 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.5.15 3202
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.5.16 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.5.16 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.5.* *
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P 183.82.41.2 194.39.131.34 3299
#P 183.82.41.2 194.39.131.34 *
P 192.168.5.15 194.39.131.34 3299
P * 194.39.131.34 *
P * * 23
P * * *
Deny all other connections
#D * * *
But getting the router permisson denied. when i'm trying to connect.
Thanks in advance
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.