on 05-15-2011 8:28 AM
Hi SAP Guru
I have an issue in my WMS setup.
I currently assigned Storage Type XXX for palletization. PUTAWAY STRAT : P
Mixed Storage : X
Addition to Stock : X
In the master Data setup i have input the palletization information already under SUT IP.
For Material X = 100 GM for each pallet ( IP)
For Material Y = 200 GM for each pallet ( IP)
For each storage bin i have dividied into 4 sections ( or quants )
so bascially naming convention will be like this
C11000 / 1
C11000 / 2
C11000 / 3
C11000 / 4
Now the issue is, when I create a TO for material X ( 10GM) , the system will automatically propose the bin.
The system will assign the material to bin C11000 / 1
If i create another TO for material X (5GM) different batch, the system will automatically propose the bin
The system will assign material X to bin C11000 / 2.
IF i create TO for material Y ( 10GM )
The system will assign material Y to bin C11000 / 3.
Should the system fill in C11000 / 1 before moving on to C11000 / 2 and so on?
TOs should be created properly.
The process should be:
1)
You create the TO for materialX, quantity 10 pcs --> system will assign SU1 and put the goods into bin "C11000 / 1"
2)
When you create the next TO you should overwrite the data proposed by the system.
System will propose SU2 and bin "C11000 / 2" --> in foreground mode (when system reaches LT04) you have to:
- delete SU2 proposed by the system --> enter SU1
- delete destination quant number proposed by the system (and leave the field empty)
- correct destination bin ID (from "C11000 / 2" --> "C11000 / 1")
This way system will add (if possible) the second quant to the first one.
(you can do this even within one TO if you putaway several quants)
(This (corrections) is manual process since system has no information whether you want to add the new quant to an existing SU or not. It assumes you want to handle it separately - as I understand.)
Edited by: Csaba Szommer on May 15, 2011 7:48 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks alot , it was alot of help.
Is there a way , where I can divide the bin in to 4 pallet?
I understand you can use the capacity usage check at bin level.
It would be nice if you could comment on the logic I have with how this work.
Material X is palletized ( WM2 ) , 10000GM = IP
Material Y is palletized ( WM2) , 20000GM = IP
I have activated Cap Check for storage type XXX with 5
I have enter the LET capacity usage for SUT ( OMM1) as 1
For the bin master data, i have put the capacity usage as 4.
So bascially the effect will be, for Material X , i can putaway 40000GM of goods into this bin
Material Y can putaway 80000GM of goods into this bin
The bin can handle 20000GM of Material X and 40000GM of Material Y ( Mixed storage )
Thanks for the help !
Hi again
Is there anyway the system can propose to fill in the rest of the section of a bin if i use STRATEGY P . MIXED STORAGE X
Example
C11000/1 is half full
Now the system will putaway 10 piece Material Y into C11000 / 2 even though C11000 / 1 has the capacity to fill in the 10 piece Material Y.
I have to manually input C11000/1 inorder for the system to fill in C11000/1.
Is there a way the system will propose the 10 piece of Material Y be put into C11000/1 even though it is occupied? (but has enough room)
The above example uses the same SUT, but different batch.
Thanks in advance
Addition to Existing Stock Putaway Rule...
The following are the Storage Type configuration settings required to implement the
strategy:
u2022 Storage Behavior: Standard warehouse
u2022 Putaway Rules: Addition to Existing Stock/Empty Bin
u2022 Addn.Stock Forbidden:If you want to allow additions to existing stock, choose u201C
u201D (Addition to existing stock permitted) or u201CMu201D (Addition to existing stock via
addtn ID in product master). If you choose u201CMu201D, you must choose the required
value for the Addit.to Exist.Stock indicator in the product master.
u2022 Mixed Storage: Only one HU allowed per bin
u2022 A method of capacity checking is configured.
If it is helpful to you Plz Rewards point , thankyou
Hello,
You can use Putaway Strategy for Pallets.
Details : http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Regards,
Komal
User | Count |
---|---|
91 | |
10 | |
10 | |
6 | |
5 | |
5 | |
5 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.