on 05-12-2011 3:47 PM
Hello everyone,
it's been two days reading and trying different solutions already posted to ths topic. Now i've reached the end of my knowledge.
The problem is as folows:
I have a server here on which I installed SAP ECC 6.0 with MaxDB two years ago. Since it wasn't used much now, i saw no purpose of maintaining it. Until now. I found out, that i had access to SAP with all the rights i needed, but misplaces the username / password to the database (control, superdba, sap<sid>).
I am not the brightest light on SAP products although i took trainings on MaxDB and SAP ECC installation (2 years ago).
I managed to reset the password for the user CONTROL somewhere through the LiveCache Transaction (i think). Since the CONTROL user was already logged on i could reset the password with a dbmcli command.
Then i was able to reset the passwords for the other users: superdba and sapc01.
You might have noticed that my sid is C01, so i will continue with this term rather than writing sap<sid>
Anyways. i restarted the mashine and now the MMC tells me, that the SAP System cannot connect to the database.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The error diplayed in the MMC is:
SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
and
SAP-Basis System: Operating system call recv failed (error no. 10054)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
As i am not the only one with this problem i already read all the other threads and notes concerning this topic (ie 25591). Sadly none of them helped me. I also tried updating the xuser list as told in the Note 39439. STill no success.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
In case it might help, i'll post my logs here:
r3trans -d:
D:\usr\sap\C01\SYS\exe\uc\NTAMD64>R3trans.exe -d
This is R3trans.exe version 6.14 (release 700 - 14.02.08 - 14:55:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3trans.exe finished (0012).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
dev_W0:
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "700"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
B
B Thu May 12 16:22:35 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\C01\DVEBMGS02\exe\dbsdbslib.dll' ...
B Library 'D:\usr\sap\C01\DVEBMGS02\exe\dbsdbslib.dll' loaded
B Version of 'D:\usr\sap\C01\DVEBMGS02\exe\dbsdbslib.dll' is "700.08", patchlevel (0.144)
B New connection 0 created
M sysno 02
M sid C01
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2648
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2648) [dpxxdisp.c 1305]
I
I Thu May 12 16:22:36 2011
I MtxInit: 30000 0 0
M
M Thu May 12 16:22:37 2011
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 000000000EE70050
M DpShMCreate: allocated wp_adm at 000000000EE72150
M DpShMCreate: allocated tm_adm_list at 000000000EE783A0
M DpShMCreate: allocated tm_adm at 000000000EE78400
M DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
M DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
M DpShMCreate: allocated comm_adm at 000000000F3E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
M DpShMCreate: allocated gw_adm at 000000000F46ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F46ACE0
M DpShMCreate: allocated wall_adm at 000000000F46ACF0
M
M Thu May 12 16:22:40 2011
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Thu May 12 16:22:43 2011
X <ES> client 0 initializing ....
X
X Thu May 12 16:22:44 2011
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu May 12 16:22:46 2011
M ThInit: running on host saptest
M
M Thu May 12 16:22:48 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.144 (Make PL 0.144)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.139) Return DS_SQLERR instead of DS_CONNECTERR (note 1121076)
C (0.131) Do not trace password of SQLOPT into dev trace (note 1097930)
C (0.130) Performance optimization for UPDSTAT PREPARE (note 1096387)
C (0.125) Update statistic prepare on row level (note 1086430)
C (0.104) Update statistic with empty schemas (note 1041547)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.3 BUILD 009-123-163-622
C SQLDBC client runtime is MaxDB 7.6.3.009 CL 163622
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server saptest_C01_02 on host saptest (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu May 12 16:22:48 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2648) [dpnttool.c 327]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
xuser list:
-----------------------------------------------------------------
XUSER Entry 1
--------------
Key :DEFAULT
Username :SAPC01
UsernameUCS2:S.A.P.C.0.1. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :DB2
Nodename :saptest
Sqlmode :<unspecified>
Cachelimit :-1
Timeout :0
Isolation :0
Charset :<unspecified>
-----------------------------------------------------------------
XUSER Entry 2
--------------
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :DB2
Nodename :SAPTEST
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
-----------------------------------------------------------------
XUSER Entry 3
--------------
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :DB2
Nodename :SAPTEST
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
I also changed the password for the SAPServceC01 user.
Let's assume the i choose the password "fortknox", all my users (superdba, control, sapc01, SAPservicec01, etc) have the same password. that makes it a bit easier.
Any help will be greathly appreciated! Thank you in advance.
Edited by: Jan Selucky on May 12, 2011 4:47 PM
Edited by: Jan Selucky on May 12, 2011 4:48 PM
Okay, i managed to solve my problem by doing the following:
The xuser entry i was editing was for the wrong user.
I had to use a parameter for for editing the DEFAULT connection for user myDomain\SAPServiceC01
Then it worked.
That is a little thing the SAP Note should maybe mention, as i was connected to the SAP Server with my regular User/Pass for our Domain.
Greetings
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hey there,
it's been a long time, but I think the note 39439 was corrected:
On Windows, the XUSER entries are stored in the registry. For the operating system users <sid>adm and SAPService<SID>, create the XUSER entries mentioned below. As of MaxDB Version 7.5, an operating system user that has administrator rights can store the XUSER entries for SAPService<SID>. To do this, use the XUSER option '-c'; for example:
xuser -c <domain>\SAPService<SID> ...
I think that's what I did back then.
Greetings.
Jan
Hi,
From the work process logs:
Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
Note 39439 might be helpful to recreate the XUSER entries.
Regards,
Srikishan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi!
Thank you very much for your ansewer. I'm sorry, but somehow i can't manage to bring my answer in the right format.
I used the lines - - - - to mark new paragraph because the editor doesn't accept my [enter] key.
Anyways i already followed the xUser Note 39439. Somehow i am missing something. As i already posted, my xUser list has 3 entries:
C:\>xuser list
-
XUSER Entry 1
-
Key :DEFAULT
Username :SAPC01
UsernameUCS2:S.A.P.C.0.1. . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :DB2
Nodename :saptest
Sqlmode :<unspecified>
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
-
XUSER Entry 2
-
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :DB2
Nodename :SAPTEST
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
-
XUSER Entry 3
-
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :DB2
Nodename :SAPTEST
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
-
Where's the mistake here? I see the Database name which is correct. Or does it need a prefix or suffix?
Greetings.
Jan
User | Count |
---|---|
88 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.