on 02-21-2011 9:23 AM
Hi Experts,
I am doing the DR setup for production server. Created standby database successfully. Then I shutdown primary database and activate the secodry database to primary database adn chage the profile configration and start the SAP instance, Desp+work.exe down after 1 minute and ABAP WP table is giving error.
Attached the erroe below
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid MVQ
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5520
Mon Feb 21 14:14:56 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5520) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 14:15:01 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00 <
DpShMCreate: sizeof(wp_adm) 21008 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 14:15:41 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1565
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 14:15:51 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 14:16:09 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1472 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1472 (pos=2)
SiSelNRemove: removed sock 1472
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1472
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5520) [dpxxdisp.c 10484]
Good Bye .....
Please help me to solve this issue
Thanks in Advance
Jose H.
ORA-01034: ORACLE not available
So your DB is not in open status, connect to SQL and issue the commad select status from v$instance and paste the result.
And what are the steps you performed to create your standby server?
Regards,
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
I have started the Database instance now is datanase mounted and is in Read and write mode
SQL> sellect name, open_mode v$database;Disconnected from Oracle Database 10g En
terprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
C:\Documents and Settings\Administrator>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Feb 21 17:14:27 2011
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select name, open_mode from v$database;
NAME OPEN_MODE
-
-
MVQ READ WRITE
SQL> select instance_name from v$instance;
INSTANCE_NAME
-
mdr
SQL>
For DR setup I done the followind steps
Primary Database (SAP and Oracle SID is MVQ)
1) enabled force logging (mandatory for the dataguard setup)4) Shutdown the database and copied the datafiles and log files to the DR site
2) Added stand by log files.
3) modified the dataguard related parameters in spfile - db_unique_name, fal_server, fal_client,
4) Shutdown the database and copied the datafiles and log files to the DR site
5) Created standby control file from DR environment
alter database create standby controlfile as MDR.ctl
6) Copied the control file to the DRSERVER
7) copied the oracle password file to the DR server in the $ORCALE_HOME/database folder
Install New sap instance with same SID as primary database
Secondry Database ( Oracle SID is MDR and SAP SID is MVQ)
MDR - Database
===============
1) Created init file from the MVQ database and modified with the following
2) Created the windows service for the standby database
oradim u2013NEW u2013SID MDR u2013STARTMODE manual
3) Added the database entries in both the TNSNAMES.ora and LISTENER.ora in both the oracle servers in the following paths
$ORACLE_HOME/network/admin/tnsnames.ora and $ORACLE_HOME/network/admin/listener.ora
4) Reloaded the listeners in both the oracle servers
5) Started the database in mount stage using above mentioned pfile
and brought the databse in mount stage,
6) Started managed recovery using
alter database recover managed standby database disconnect from session;
7) Verified the Managed recovery process and checked the log gap
After that I have added the variable
Oracle_sid = MDR
Is it right way or any mistake i did. Please advice me to solve this issue
Regadrs
Jose H.
Hi,
Check bellow steps....
1. Check Database listner service is started
2. Check Database<SID> server is started.
3. Check Database server is up.
4. check free space of datafile and tablespace
5. if database is up then use R3Trans -d command and check sap application connetivity.
you will get <0000> text if there is proper connect.
then you can easily start the server
Thanks,
HI,
1. Database listner service is running
2. Database<SID> server is running
3. Database server is up adn running.
4. Free space of datafile and tablespace is available
5. iR3Trans -d command is giving error
D:\usr\sap\MVQ\SYS\exe\uc\NTIA64>R3trans -x
This is R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'MVQ'"
R3trans finished (0012).
Can you please help me to solve this issue
Regards
Jose H.
> D:\usr\sap\MVQ\SYS\exe\uc\NTIA64>R3trans -x
> This is R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
> unicode enabled version
> 2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
> ra_tnsname = 'MVQ'"
> R3trans finished (0012).
You don't get a connect to the database, the resulting log is most likely the same as before - "Oracle not available". Please check your alert_<SID.log, tnsnames.ora (check if you can ping the database SID with 'tnsping') and provide more information. Just posting "it doesn't work" doesn't give enough information to help you.
Markus
What is the status of your Database?
Issue R3trans -dx command and paste only the ERROR lines from the trans.log (You can find the trans.log file at the same location where you issued the R3trans command).
Regards,
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
R3trans giving the error
D:\usr\sap\MVQ\DVEBMGS00\exe>R3trans -dx
This is R3trans version 6.14 (release 700 - 24.04.08 - 14:09:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3trans finished (0012).
dev_w0 log below
M calling db_connect ...
C Prepending D:\usr\sap\MVQ\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@MVQ on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000022BA7220 0000000022BAF450 0000000022BCCC78
C Attaching to DB Server MVQ (con_hdl=0,svchp=0000000022BCCB38,srvhp=0000000022BCEF68)
C
C Mon Feb 21 15:29:09 2011
C Starting user session (con_hdl=0,svchp=0000000022BCCB38,srvhp=0000000022BCEF68,usrhp=0000000022BAFC68)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=0000000022BCCB38,srvhp=0000000022BCEF68)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11145]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@MVQ on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000022BA7220 0000000022BAF450 0000000022BCCC78
C Attaching to DB Server MVQ (con_hdl=0,svchp=0000000022BCCB38,srvhp=0000000022BCEF68)
C Starting user session (con_hdl=0,svchp=0000000022BCCB38,srvhp=0000000022BCEF68,usrhp=0000000022BAFC68)
C
C Mon Feb 21 15:29:10 2011
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=0000000022BCCB38,srvhp=0000000022BCEF68)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11145]
B ***LOG BV3=> severe db error 1034 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1034 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10504]
> C Oracle Client Version: '10.2.0.1.0'
Your Oracle client version is unsupported, update instantclient.
> B ***LOG BV3=> severe db error 1034 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
> B ***LOG BY2=> sql error 1034 performing CON [dblink#5 @ 431] [dblink 0431 ]
> B ***LOG BY0=> ORA-01034: ORACLE not available
Your database is not properly started. Start it first completely.
Markus
Just restart the machine to free-up(Remove) the shared memory and the start SAP (DB and then SAP).
*Always just paste the ERROR lines from the log and not the full log
Regards,
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
What's the output of the message server in this case?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Dinter,
Please find the log below..
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid MVQ
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2080
Mon Feb 21 15:28:59 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2080) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 15:29:05 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00 <
DpShMCreate: sizeof(wp_adm) 21008 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Mon Feb 21 15:29:06 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00 <)
DpStartStopMsg: start msg sent
Mon Feb 21 15:29:07 2011
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 15:29:46 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 15:29:56 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Feb 21 09:59:56 2011
========================
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 15:30:14 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1476 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1476 (pos=2)
SiSelNRemove: removed sock 1476
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1476
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
Mon Feb 21 15:30:15 2011
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2080) [dpxxdisp.c 10484]
Good Bye .....
Regards
Jose H.
User | Count |
---|---|
85 | |
10 | |
10 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.