Hi Russo,
Hope the below information helps you to understand the availability check.
General Control Features:-
The following control elements need to be maintained in Customizing and in the material master record:
A. Strategy group: The allowed planning strategies (main strategy and further possible strategies) are combined in the strategy group. As of Release 3.0, the strategy group is specified in the material master record in the MRP 1 Screen. In Customizing, strategy groups are assigned, dependent on plant, to MRP groups. If the strategy group is missing in the material master record, it is determined on the basis of the MRP group, if it has been maintained.
B. MRP group:
The MRP group combines materials from the point of view of material requirements planning. This enables you to control planning for these materials in a particular way using, for example, the strategy group, consumption mode and planning period. You enter the MRP group in the material master in the MRP 1 screen. The strategy group is determined from the MRP group.
C. Planning Strategy
The planning strategy specifies the requirements type for planning and customer requirements. This represents the decisive control feature for the interaction between Production Planning and Sales and Distribution.
D. MRP type and item category
If no requirements type is found using the planning strategy, the system tries to determine a corresponding requirements type on the basis of the MRP type and the item category
E. Requirements type
The various requirements are identified by their requirements type. The requirements type refers to the requirements class and its control features.
F.Requirements Class
The requirements class contains all control features for planning such as relevance for planning, requirements planning strategy and requirements consumption strategy. In addition, it is specified at a global level whether an availability check is to take place for the material in the sales and distribution documents on the basis of the ATP quantity (ATP = available to promise) and whether requirements are to be passed on. A finer degree of control can be obtained for sales documents using the schedule line category.
Control Features Specific to Sales and Distribution:
The following SD-specific control features need to be maintained in Customizing.
A.Checking group
The checking group controls whether the system is to create indivdual or collective requirements in sales and shipping processing. In addition, a material block for the availability check with transfer of requirements can be set here. The checking group can also be used to deactivate the availability check. This option was created especially for the assembly order so that when the bill of material is exploded in the assembly order, the individual components, if necessary, can be classified as non-critical parts as far as procurement is concerned.
The checking group specifies in combination with the checking rule the scope of the availability check. It is proposed in the material master record on the basis of the material type and the plant, and copied into the sales and distribution documents.
B. Checking Rule
You use the checking rule to control the scope of the availability check for each transaction in sales and distribution. You also specify whether the check should be carried out including or excluding replenishment lead time. The individual checking rules define by transaction, which stock and inward and outward movement of goods should be taken into account for the availability check.
C. Schedule line category
You can control with the schedule line category whether an availability check and transfer of requirements should be carried out in the sales documents. The possible settings for this at schedule line level are dependent on the settings in the requirements class which is determined from the requirements type of the material.
D.Delivery item category
The delivery item category can be used to control whether an availability check takes place in deliveries.
Prerequisites
An availability check can only be carried out if the following prerequisites have been fulfilled:
The control elements described above for the availability check must be maintained in Customizing for Sales and the relevant assignments made to the sales transactions
The availability check must be switched on at requirements class level and - for the availability check in the sales documents - at schedule line category level
A requirements type must exist by which the requirements class can be found
A plant must be defined. It can either be proposed from the customer or material master record or can be entered manually in the document.
A checking group must be defined in the material master record on the Sales/plant data screen in the Availability check field.
At the global requirements class level, the availability check can only be switched on in combination with the transfer of requirements. At schedule line level, the settings are proposed from the requirements class.
If the availability check is switched on at requirements class level, it can be switched off at schedule line level. However, you cannot switch on the availability check at schedule line level, if it is switched off at requirements class level. You can make this setting at schedule line level. But the system ignores it and the setting for the requirements class applies.
Also, at schedule line level when the availability check is switched on, the transfer of requirements can be switched off. For example, this makes sense for inquiries or sales information.
The settings specific to schedule lines for performing an availability check are only relevant for sales documents. In the shipping documents, the settings from the requirements class and the delivery item category are used. As with the schedule line category, the availability check can be switched off as required in the delivery item category.
Please let me know your thoughts.
Thanks and Regards,
Satheesh Durgi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.