SAP Ninstallation got failed phase (Create users for SAP System)

[Former Member]

Dear all,

I have tried to install SAPnetweaver 7.0 (Only ABAP Stack) and it got failed phase (phase 3 of 28) Create users for SAP

System...

Kindly check below logs

ERROR 2014-01-24 22:54:42

FSL-01001 Unable to check existence of account SAPDEV\SAPServiceECC. The Workstation service has not been started.

ERROR 2014-01-24 22:54:42

MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.

ERROR 2014-01-24 22:54:42

FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

The above issue got resolved after created SAPserviceECC and eccadm accounts now i got the below error on phase 4 of 28 (Install Common system files) .

Kindly check below logs.

ERROR 2014-01-24 23:37:30

CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
SAPDEV\sapmnt\ with type DIRECTORY: can't create parent node..

ERROR 2014-01-24 23:37:30

CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
SAPDEV\sapmnt\ with type DIRECTORY: can't create parent node..

ERROR 2014-01-24 23:37:30

FCO-00011 The step createSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .

Kindly check below logs.

Kindly advise

Edited by: satheesh0812 on Jan 24, 2011 7:09 PM

[Former Member]

Issue on Operating system , after reinstall OS and got installed SAP

[Former Member]

Hi,

Disable User Access Control and the Password Policy in Windows.

If the error still persists, manually create the users and then check.

Regards,

SBK

[Former Member]

Now Installation got failed (Install Software Unit)

Dear all,

ERROR 2011-01-27 11:42:44

MUT-02041 SDM call of jstartup mode=standalone ends with returncode 16

ERROR 2011-01-27 11:42:44

MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.

ERROR 2011-01-27 11:42:44

FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|enableUsageTypes was executed with status ERROR .

pls check callSdmViaSapinst.log.

Jan 27, 2011 12:03:45... Info:

Jan 27, 2011 12:03:45... Info: ==============================================

Jan 27, 2011 12:03:45... Info: = Starting to execute command 'jstartup' =

Jan 27, 2011 12:03:45... Info: ==============================================

Jan 27, 2011 12:03:45... Info: Starting SDM - Software Deployment Manager...

Jan 27, 2011 12:03:45... Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0009.20060817110748.0000

Jan 27, 2011 12:03:45... Error: Error while reading from file: Cannot parse XML document.

Additional error message is:

com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: No data allowed here: (hex) 0, 0, 0 (D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc, row:1, col:3)(D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0, 0, 0(D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc, row:1, col:3)

Throwable: com.sap.sdm.xml.extern.XMLParseException Throwable message: Cannot parse XML document.

Additional error message is:

com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: No data allowed here: (hex) 0, 0, 0 (D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc, row:1, col:3)(D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0, 0, 0(D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc, row:1, col:3)

Jan 27, 2011 12:03:45... Error: Error while reading the SDM repository. Error message is:

com.sap.sdm.persistency.FileCantReadException: Can't read file D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc

Jan 27, 2011 12:03:45... Fatal: Error while reading the SDM repository.

Jan 27, 2011 12:03:45... Error: Severe (internal) error. Return code: 16

Kindly suggest ...

Edited by: satheesh0812 on Jan 27, 2011 8:03 AM

[Former Member]

Hi,

Jan 27, 2011 12:03:45... Error: Error while reading the SDM repository. Error message is:

com.sap.sdm.persistency.FileCantReadException: Can't read file D:\usr\sap\IXD\DVEBMGS00\SDM\program\config\sdmrepository.sdc

Check in the path given above is there aby issue in accessing sdmrepository.sdc file?

Regards,

Tajinder

[nirmal_konchada]

Hi,

Install SAP with a user wth Administraor rights.

Regards,

Nirmal.K

[sunny_pahuja2]

Hi,

Please disable the password policy in windows and then repeat this phase.

Thanks

Sunny

[Former Member]

Any Update for above error .

and pls check StopServer.bat.log.

C:\Program Files (x86)\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS>set sdm_java_home=C:/j2sdk1.4.2_28

C:\Program Files (x86)\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS>set sdm_64bit_switch=

C:\Program Files (x86)\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS>set sdm_heap_size=256

C:\Program Files (x86)\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS>set sdm_memory_switch=-Xmx256M

C:\Program Files (x86)\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS>set sdm_com="C:/j2sdk1.4.2_28\bin\java" -Xmx256M -jar "D:\usr\sap\IXD\DVEBMGS00\SDM\program\bin\SDM.jar"

C:\Program Files (x86)\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS>"C:/j2sdk1.4.2_28\bin\java" -Xmx256M -jar "D:\usr\sap\IXD\DVEBMGS00\SDM\program\bin\SDM.jar" shutdown "sdmguiport=50018" "sdmhome=D:\usr\sap\IXD\DVEBMGS00\SDM\program"

Sending shutdown request on Port 50018

Could not shutdown server: The SDM Server is not running.(1)

Details: Could not establish connection to server 'localhost/50018': Connection refused: connect

Processing error. Return code: 104

Kindly suggest

Edited by: satheesh0812 on Jan 27, 2011 9:34 AM

[Former Member]

check the note: 905856 for SDM error.

[Former Member]

I think it is due to some antivirus software program.Please try to disable Antivirus software and then give a try.

You can have a look on given below link

Thanks

Sukrut S