on 01-14-2011 2:44 PM
Hi Experts,
After adding and activating the paramter of sapgui/user_scripting from rz10 of our SRM system, then restarted the system, my dispatcher won't startup. I already restarted the system, database and also the server assuming that will solve the issue but still i encounter the same problem. please see below for the dev_disp logs:
-
trc file: "dev_disp", trc level: 1, release: "701"
-
sysno 02
sid SR2
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 55
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 3452
Fri Jan 14 19:02:36 2011
kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 3452) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 55 successfully loaded
shared lib "dw_xtc.dll" version 55 successfully loaded
shared lib "dw_stl.dll" version 55 successfully loaded
shared lib "dw_gui.dll" version 55 successfully loaded
shared lib "dw_mdm.dll" version 55 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3902
Fri Jan 14 19:02:41 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5532]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >MDCSAP05_SR2_02 <
DpShMCreate: sizeof(wp_adm) 84096 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm) 156064 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=9200/16/883264/883280
DpShMCreate: sizeof(file_adm) 883280 (72)
DpShMCreate: sizeof(vmc_adm) 85744 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007190050, size: 7793536)
DpShMCreate: allocated sys_adm at 0000000007190050
DpShMCreate: allocated wp_adm at 0000000007192270
DpShMCreate: allocated tm_adm_list at 00000000071A6AF0
DpShMCreate: allocated tm_adm at 00000000071A6B50
DpShMCreate: allocated wp_ca_adm at 000000000774A3D0
DpShMCreate: allocated appc_ca_adm at 00000000077501D0
DpShMCreate: allocated comm_adm at 0000000007752110
DpShMCreate: allocated slock_adm at 00000000077D8DA0
DpShMCreate: allocated file_adm at 00000000077FEF40
DpShMCreate: allocated vmc_adm_list at 00000000078D6990
DpShMCreate: allocated gw_adm at 00000000078D6A10
DpShMCreate: allocated vmc_adm at 00000000078D6A40
DpShMCreate: allocated ca_info at 00000000078EB930
DpShMCreate: allocated wall_adm at 00000000078EB940
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 9200 entries
DpSesCreateTable: created session table at 0000000008600050 (len=145632)
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16379MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16380MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4094 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcInit2: o.k.
Fri Jan 14 19:02:45 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1682]
***LOG Q0K=> DpMsAttach, mscon ( MDCSAP05) [dpxxdisp.c 12560]
DpStartStopMsg: send start message (myname is >MDCSAP05_SR2_02 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 55
Release check o.K.
Fri Jan 14 19:03:05 2011
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Jan 14 20:26:34 2011
DpSigInt: caught signal 2
DpHalt: shutdown server >MDCSAP05_SR2_02 < (normal)
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes
Fri Jan 14 20:26:35 2011
Stop gateway
Stop icman
Terminate gui connections
wait for end of work processes
wait for end of gateway
waiting for termination of gateway ...
Fri Jan 14 20:26:36 2011
wait for end of icman
waiting for termination of icman ...
Fri Jan 14 20:26:37 2011
waiting for termination of icman ...
Fri Jan 14 20:26:38 2011
waiting for termination of icman ...
Fri Jan 14 20:26:39 2011
waiting for termination of icman ...
Fri Jan 14 20:26:40 2011
DpStartStopMsg: send stop message (myname is >MDCSAP05_SR2_02 <)
DpStartStopMsg: stop msg sent
Fri Jan 14 20:26:41 2011
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12906]
MBUF state OFF
MBUF component DOWN
cleanup EM
***LOG Q05=> DpHalt, DPStop ( 3452) [dpxxdisp.c 11122]
Please help, Thanks in advance!
Regards,
Tony
Problem solved by..
Go to :\usr\sap\<SID>\SYS\profile and change
<SID>_DVEBMGS02_<hostname> to <SID>_DVEBMGS02_<hostname>.OLD
and
<SID>_DVEBMGS02_<hostname>.BAK to
<SID>_DVEBMGS02_<hostname>
then restart the system.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.