on 12-01-2010 7:45 AM
Dear team,
During Local client copy in test mode .After some tome session terminated .
I am getting error and when I check system log.
12:42:18 DIA 000 100 SAP* AB 0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
12:42:18 DIA 000 100 SAP* AB 2 > Include ??? line 0000.
12:42:18 DIA 000 100 SAP* AB 0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
12:42:18 DIA 000 100 SAP* AB 2 > Include ??? line 0000.
12:42:18 DIA 000 100 SAP* AB 0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
12:42:19 DIA 000 100 SAP* Q0 2 Stop Workproc 0, PID 5592
12:43:45 RD Q0 I Operating system call recv failed (error no. 10054)
12:44:00 WRK 000 Q0 Q Start Workproc 0, Pid 1776
12:44:03 DIA 000 100 SAP* R4 7 Delete session 001 after error 023
12:44:10 DIA 000 000 SAPSYS A1 0 Initialization complete
12:44:10 DIA 000 000 SAPSYS A1 4 > in program , line ??? , event
12:46:32 DIA 000 100 SAP* SESS TZ 1 The System's Time Zone Cannot be Determined. Enter it Using STZAC.
When I check Abap dump
Error analysis
An R/3 System process was terminated by an operating system signal. -
Possible reasons for this are:
1. Internal system error.
2. Process was terminated externally (by the system administrator). -
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server testserver_SAL_00 on host testserver (wp 0)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 10354
The error reported by the operating system is:
Error number..... " "
Error text....... " "
Pooja
read your error and act accordingly:
The System's Time Zone Cannot be Determined. Enter it Using STZAC
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear
I have set the Time Zone and change the parameter also of "ztta/diag_area 25000 to 50000.
But again same error.
Target Client 100
Source Client (incl. Auth.) 001
Source Client User Master 001
Copy Type Local Copy
Profile SAP_ALL
Status Cancelled
User SAP*
Start on 02.12.2010 / 14:18:14
Last Entry on 02.12.2010 / 14:28:56
Last Action: Copy/Delete Tables
- Table Being Edited: T005X
Statistics for this Run
- No. of Tables 2002 of 15741
- Deleted Lines 199168
- Copied Lines 199168
I check that every time it give same table T005X.
and check System Log.
5:01:13 testserver_SAL_00 BTC 010 001 BASIS SAPMS07A STMS F3 T Invalid object name for TemSe object: " "
5:01:14 testserver_SAL_00 BTC 010 001 BASIS SAPMS07A SBTC EC F Failed to create log for job SAP_COLLECTOR_FOR_PERFMONITOR 14035300 %NEWSTEP/
5:01:14 testserver_SAL_00 BTC 010 001 BASIS SAPMS07A STMS F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
5:01:14 testserver_SAL_00 BTC 010 001 BASIS SAPMSSY2 STSK R4 7 Delete session 001 after error 023
Whats the error it show?
The errors are not related to your client copy as your are executing the client copy using sap* and the errors are for BASIS users. Going back to your oringal thread, can you please investigate the dump or past the content from the dump for What happned? what you can do, error analysis and how to correct the error? Are you executing the client copy in test mode?
Dear,
I am not running in test mode.
SCC3 Log
Target Client 100
Source Client (incl. Auth.) 001
Source Client User Master 001
Copy Type Local Copy
Profile SAP_ALL
Status Cancelled
User SAP*
Start on 02.12.2010 / 17:24:31
Last Entry on 02.12.2010 / 17:34:43
Last Action: Copy/Delete Tables
- Table Being Edited: T005X
Statistics for this Run
- No. of Tables 2002 of 15741
- Deleted Lines 199168
- Copied Lines 199168
SYSTEM LOG
17:39:59 WRK 000 Q0 Q Start Workproc15, Pid 4432
17:40:03 BTC 015 001 BASIS F3 T Invalid object name for TemSe object: " "
17:40:03 BTC 015 001 BASIS EC F Failed to create log for job SAP_COLLECTOR_FOR_NONE_R3_STAT 16381900 %NEWSTEP/
17:40:03 BTC 015 001 BASIS F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
17:40:04 BTC 015 001 BASIS R4 7 Delete session 001 after error 023
17:40:12 RD Q0 I Operating system call recv failed (error no. 10054)
17:40:18 WRK 000 Q0 Q Start Workproc16, Pid 4548
17:40:21 BTC 016 001 BASIS F3 T Invalid object name for TemSe object: " "
17:40:21 BTC 016 001 BASIS EC F Failed to create log for job SAP_COLLECTOR_FOR_PERFMONITOR 16381900 %NEWSTEP/
17:40:21 BTC 016 001 BASIS F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
17:40:22 BTC 016 001 BASIS R4 7 Delete session 001 after error 023
19:13:53 DIA 000 100 SAP* TZ 1 The System's Time Zone Cannot be Determined. Enter it Using STZAC.
19:13:53 DIA 001 100 SAP* R4 7 Delete session 001 after error 061
I have created BASIS user in 001 and I have define house keeping job by BASIS User.
ABAP Dump
Runtime Errors SYSTEM_CORE_DUMPED
Date and Time 02.12.2010 17:39:34
Short text
Process terminated by signal " ".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLSEU_COMPONENT" program had to be terminated because
ABAP processor detected an internal system error.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator .
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An R/3 System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal system error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server testserver_SAL_00 on host testserver (wp 16)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 10354
The error reported by the operating system is:
Error number..... " "
Error text....... " "
How to correct the error
The R/3 System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
It seems your workprocesses crashed due to some database errors.
I suggest you update to the latest kernel and latest database interface libraries and try again.
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.