on 11-03-2010 9:06 AM
Dear All,
The scenario is as follows - Route determination is configured.I am sending 15 Metric Tonnes of Steel from Point-1 to Point-3 via Point-2 by road.The Truck drops 5 Metric Tonnes in Point-2 and 10 Metric Tonnes in Point-3.
How to configure the above.
Someone plzzzzz help
Regards.
thanks this thread is closed
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You have not specified whether you would generate multiple deliveries or with one delivery, this drop shipment will happen.
Assuming that the scenario would be one delivery against multiple shipments, following are my suggestion:-
The Truck drops 5 Metric Tonnes in Point-2
1) Define mode of Transport in 0vtb
2) Define Shipping Types in 0vta
3) Define Transportation Connection Points in 0vtd
4) Defind Routes and Stages in 0vtc
5) Maintain Transportaion Zones in OVR1
6) Define Transportation Groups in OVL7
7) Maintain Route Determination in 0vrf
😎 Tick Relevant for Transport for your Route in 0vtr
9) Define Shiment Types in OVTK
10) Maintain Number Range for this Shipment Type in VN07
11) Define Shipment Cost Types and Item Categories in T_56
12) Define Shipment Cost Relevance in T_57
13) Create Condition Type for your Shipment Cost in T_06
14) Maintain Access Sequence for this condition type in T_07
15) Create and Assign a new Pricing Procedure in T_08
Please note while creating Shipment Type in OVTK, ensure that you maintain as follows:-
a) For the field "ProcessControl", either 2 or 3 is maintained
b) For the field "Leg indicator", Main Leg for first one and Subsequent Leg for the second shipment type
c For the field "Determine legs", it should be blank for the first shipment type
With the above configuration, create a shipment document with first route in VT01N followed by Shipment Cost in VI01 for first stage and secon stage.
thanks
G. Lakshmipathi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear All,
Can anyone please tell me the configuration steps in detail for multidrop shipment.
Regards.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi,
if you have to transfer frieght cost to the customer then at that point of time why you need TM.
simply take the frieght condition type into consideration into sales order it will get copied into delivery document and billing document
this will solve your issue.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi,
this is to inform you that it is called multi drop shipment or transportation chain in SAP.
if you want to create one single three deliveries in three different locations first you have to configure HUM's.
then,
you have to create one shipment or three shipment documents basing on your requriment and transporataion chain.
then proceed with transportation module configuration.
then settle to the vendor withautomatic service entry sheet.
then go for billing to the customer.
if you want to transfer the frieght cost to the customer not FFA then its a different scenario all together.
regards,
balajia
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Bob,
Are you using transportation management of SAP?
Regards,
Mukul
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
99 | |
11 | |
11 | |
6 | |
6 | |
4 | |
4 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.