Running, MS conn ok, Dia Queue time: 0.00 sec, J2EE status info unavailable

[Former Member]

hi all,

I have installed solution manager and was running fine but now when i start it then getting below issue in sapmmc

Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable

while log of disp+work and dev_jcontrol having issue...

DpMsgAdmin: Set patchno for this platform to 254
Release check o.K.
Fri Oct 29 12:46:57 2010
J2EE server info
  start = TRUE
  state = STARTED
  pid = 4372
  argv[0] = F:\usr\sap\SOL\SYS\exe\uc\NTAMD64\jcontrol.exe
  argv[1] = F:\usr\sap\SOL\SYS\exe\uc\NTAMD64\jcontrol.exe
  argv[2] = pf=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=64995
  argv[5] = -DSAPSYSTEM=00
  argv[6] = -DSAPSYSTEMNAME=SOL
  argv[7] = -DSAPMYNAME=solman4_SOL_00
  argv[8] = -DSAPPROFILE=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED

Fri Oct 29 12:47:00 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 568
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2480) [nixxi.cpp    4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c   1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

Fri Oct 29 12:47:17 2010
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Fri Oct 29 12:47:37 2010
DpEnvCheckJ2ee: switch off j2ee start flag
DpEnvCheckJ2ee: switch off j2ee start flag

dev_jcontrol

---------------------------------------------------
trc file: "F:\usr\sap\SOL\DVEBMGS00\work\dev_jcontrol", trc level: 1, release: "700"
---------------------------------------------------
node name   : jcontrol
pid         : 4372
system name : SOL
system nr.  : 00
started at  : Fri Oct 29 12:46:57 2010
arguments	  :
	  arg[00] : F:\usr\sap\SOL\SYS\exe\uc\NTAMD64\jcontrol.exe
	  arg[01] : pf=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
	  arg[02] : -DSAPSTART=1
	  arg[03] : -DCONNECT_PORT=64995
	  arg[04] : -DSAPSYSTEM=00
	  arg[05] : -DSAPSYSTEMNAME=SOL
	  arg[06] : -DSAPMYNAME=solman4_SOL_00
	  arg[07] : -DSAPPROFILE=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
	  arg[08] : -DFRFC_FALLBACK=ON
	  arg[09] : -DFRFC_FALLBACK_HOST=localhost


[Thr 2864] Fri Oct 29 12:46:57 2010
[Thr 2864] *** WARNING => INFO: Unknown property [instance.box.number=SOLDVEBMGS00solman4] [jstartxx.c   841]
[Thr 2864] *** WARNING => INFO: Unknown property [instance.en.host=solman4] [jstartxx.c   841]
[Thr 2864] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
[Thr 2864] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]

thanks in advance

Diya Chopra

[Former Member]

Dear all,

Even i am also facing same problem.

We are setting up Diaster recover  (DR ) where we are doing the mirror copy of the Source System to Target System.

After mounting all the files in Target DR System, i made the following changes in Target System.

OS: AIX

Dual stack System(ABAP +JAVA)

Instance number used :

00--ASCS00

02-- DVEBMGS02

01--SCS01

03--D03 -------------------------------------------------------------------------->  It is maintained in another DR Server

Database Used: Oracle

a)renamed the Profiles (/usr/sap/KBP/SYS/profile).

b)Changed the dbenv files (/home/kbpadm)  and (/home/orakbp)

c)set right permissions in all files and folders in /usr/sap.

d)Oracle is running and DB is also up

e)Started the profiles using sapcpe

e)After switching user (sidadm), Started the SAP Applications and SAP applications are up.

When i checked the GetProcess list according to instance wise, i am getting below output.

kbpadm>  sapcontrol -nr 02 -function GetProcessList

31.07.2013 13:16:55

GetProcessList

OK

name, description, dispstatus, textstatus, starttime, elapsedtime, pid

disp+work, Dispatcher, YELLOW, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable, 2013 07 31 11:26:41, 1:50:14, 14549078

rslgcoll, Central Syslog Collector, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11141296

rslgsend, Central Syslog Sender, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11862158

igswd_mt, IGS Watchdog, GRAY, Stopped, , , 13631708.

kbpadm> sapcontrol -nr 01 -function GetProcessList

31.07.2013 14:41:22

GetProcessList

OK

name, description, dispstatus, textstatus, starttime, elapsedtime, pid

msg_server, MessageServer, GREEN, Running, 2013 07 31 11:25:53, 3:15:29, 14614568

enserver, EnqueueServer, GRAY, Stopped, , , 14483586

kbpadm> sapcontrol -nr 00  -function GetProcessList

31.07.2013 14:41:55

GetProcessList

OK

name, description, dispstatus, textstatus, starttime, elapsedtime, pid

msg_server, MessageServer, GREEN, Running, 2013 07 31 11:26:17, 3:15:38, 10879188

enserver, EnqueueServer, GRAY, Stopped, , , 13041698

J2EE is not coming up. ALSO plz tel where to update 'system/type'  .

There is a warning msg :

J2ee Startup: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance

Server0 is not running.

Kindly Assist.

Regards.

Gayathri.K

[Former Member]

Hi

pls chk your SAPJSF and j2ee_Admin user exist through su01? and chk and change the J2EE profile parameters, JVM setting

jansi

[Former Member]

thanks for reply,,

SAPJSF and j2ee_Admin users are not showing in SU01..

Java parameter in Instance Profile are

jstartup/trimming_properties = off

jstartup/protocol = on

jstartup/vm/home = C:\j2sdk1.4.2_09

jstartup/max_caches = 500

jstartup/release = 700

jstartup/instance_properties = $(jstartup/j2ee_properties);$(jstartup/sdm_properties)

j2ee/dbdriver = $(DIR_EXECUTABLE)\ojdbc14.jar

PHYS_MEMSIZE = 4096

rdisp/wp_no_dia = 10

rdisp/wp_no_btc = 3

rdisp/j2ee_start_control = 1

rdisp/j2ee_start = 1

rdisp/j2ee_libpath = $(DIR_EXECUTABLE)

exe/j2ee = F:\usr\sap\SOL\SYS\exe\uc\NTAMD64\jcontrol.exe

rdisp/j2ee_timeout = 600

rdisp/frfc_fallback = on

icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00

icm/server_port_0 = PROT=HTTP,PORT=80$$

j2ee/instance_id = ID0076464

Regards,

diya

[Former Member]

Hi Diya,

please refer the post installation guide, you able to see the SAPJSF on your working/customizing client, which you specified

in config tool Global Server configuration -> services -> com.sap.security.core.ume.service and look at the value of ume.r3.connection.master.client.. please check te UME parameters there... if you installed JAVA stack with the solution manager user should be there....

go to that client and check whether SAPJSF user s there r nt.. with the below roles

SAP_BC_JSF_COMMUNICATION

SAP_BC_JSF_COMMUNICATION_RO

thanks,

jansi

[Former Member]

thanks for reply,

yes... i have installed SOLMAN with ABAP and JAVA stack,

when i run configTool then that DOS ConfigTool file is showing below text.

PerfTimes : loadNativeLayer: loading jperflib failed. F:\usr\sap\SOL\SYS\exe\uc\
NTAMD64\jperflib.dll: %1 is not a valid Win32 application

.

ume.r3.connection.master.client

the value of ume.r3.connection.master.client is 001 while i am going configuration in 111 client.

SAPJSF exist in SU01 with mentioned roles.

yes shivjansi .. when i am trying to connect VA (GO TO) file then i am getting error

Default

Unable to lookup connection Default

http://solman4:8101/msgserver/text/logon returned empty list of connection parameters.

manually configured with

userName: J2EE_ADMIN

Hostname: solman4

port: 8000 and if give 50004 then also getting like following error.

Unable to Logon to SOLMAN4

Cannot open connection on host:192.168.0.7 and port 8000 (this port is mentioned in SMICM)

Regards,

Diya Chopra

Edited by: DiyaChopra on Nov 4, 2010 7:17 AM