on 10-27-2010 9:04 PM
Hi Experts,
Currently Iam facing issue on SAP Router below i run from cmd command.
D:\router>saprouter -n
Thu Oct 28 00:40:14 2010
SAP Network Interface Router, Version 38.10
Thu Oct 28 00:40:15 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [
nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1912
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3299) [nixxi.cpp 2823]
ERROR => RTADMINREQ::sendAdminReq: NiBufConnect failed (rc=-10) [nirout.cpp
5657]
*****************************************************************************
*
LOCATION SAProuter 38.10 on 'crmserver'
ERROR partner '127.0.0.1:3299' not reached
*
TIME Thu Oct 28 00:40:15 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
*
*****************************************************************************
D:\router>saprouter -r -V 2 -K "p:CN=crmserver, OU=0000733362, OU=SAProuter,O=SA
P, C=DE"
trcfile dev_rout
no logging active
WARNING: wildcard character used in route target
-
DEV_ROUT TAB FILE
-
-
trc file: "dev_rout", trc level: 2, release: "700"
-
Thu Oct 28 00:45:12 2010
NiHsLInit: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 at 00290048)
NiIInit: host/serv bufs already initialized
SAP Network Interface Router, Version 38.10
Compiled Mar 1 2010 01:38:53
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 2
command line arg 4: -K
command line arg 5: p:CN=crmserver, OU=0000733362, OU=SAProuter,O=SAP, C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "D:\router\ntintel\sapcrypto.dll".
DlLoadLib success: LoadLibrary("D:\router\ntintel\sapcrypto.dll"), hdl 0, addr 10000000
using "D:\router\ntintel\sapcrypto.dll"
File "D:\router\ntintel\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
<<- SncInit()==SAP_O_K
sec_avail = "true"
<<- SncSetMyName()==SAP_O_K
in: myname = "p:CN=crmserver, OU=0000733362, OU=SAProuter,O=SAP, C=DE"
NiBufISetParam: set max heap to 20000000
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiIMyHostName: hostname = 'crmserver'
main: pid = 344, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 1900 (I4; ST)
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 0 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIListen: state of hdl 0 NI_LISTEN
NiIListen: listen for client requests on hdl 0
reading routtab: './saprouttab'
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3389' = port 0D.3D/3389
NiIGetServNo: servicename '3389' = port 0D.3D/3389
NiIGetServNo: servicename '50003' = port C3.53/50003
NiIGetServNo: servicename '3299' = port 0C.E3/3299
contents of routtab ('./saprouttab', 10 entries):
KT, p:CN=sapserv2, OU=SAProuter, O= 194.39.131.34 ffff:ffff:ffff: * *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.242 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.232 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.233 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.62 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.242 ffff:ffff:ffff: 3389 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.62 ffff:ffff:ffff: 3389 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.1.4 ffff:ffff:ffff: 50003 *
P, 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 194.39.131.34 ffff:ffff:ffff: 3299 *
P, 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 * *
NI-ROUTER LOOP ********
-
SAPROUTTAB FILE -
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.242 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.232 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.233 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.62 3200
SNC connection to local WINDOWS system for WTS, if applicable
Windows server: 192.168.1.2
Default WTS port: 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.242 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.62 3389
SNC connection to local Portal system for HTTP URL access, if applicable
Portal server: 192.168.1.4
HTTP Port: 50003
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.4 50003
Access from the local Network to SAP
P * 194.39.131.34 3299
P * * *
Deny all other connections
#D * * *
-
Above files iam sending appreciate and Thankful to you .. Please help me.
Check the values you have set in saprouttab.
You are not allowing traffic to/from localhost.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.