on 10-27-2010 5:18 PM
HI All,
We are having problems with starting up of the dispctaher.When tried to launch dpmon getting the below error.
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 110/244
Pasted the log of dev_disp.
trc file: "dev_disp.new", trc level: 1, release: "701"
-
sysno 65
sid AS0
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7010
patchlevel 0
patchno 102
intno 20020600
make: single threaded, Unicode, 64 bit, optimized
pid 15138
Thu Oct 28 03:15:54 2010
kernel runs with dp version 244000(ext=110000) (@(#) DPLIB-INT-VERSION-244000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (65 15138) [dpxxdisp.c 1287]
shared lib "dw_xml.so" version 102 successfully loaded
shared lib "dw_xtc.so" version 102 successfully loaded
shared lib "dw_stl.so" version 102 successfully loaded
shared lib "dw_gui.so" version 102 successfully loaded
shared lib "dw_mdm.so" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapkxtap03_AS0_65 <
DpShMCreate: sizeof(wp_adm) 63072 (1752)
DpShMCreate: sizeof(tm_adm) 59821952 (29896)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=5000/8/5480056/5480064
DpShMCreate: sizeof(comm_adm) 5480064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (400056/346328/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x2aa0982000, size: 66159216)
DpShMCreate: allocated sys_adm at 0x2aa0982000
DpShMCreate: allocated wp_adm at 0x2aa0984310
DpShMCreate: allocated tm_adm_list at 0x2aa0993970
DpShMCreate: allocated tm_adm at 0x2aa09939d0
DpShMCreate: allocated wp_ca_adm at 0x2aa42a0950
DpShMCreate: allocated appc_ca_adm at 0x2aa42a79d0
DpShMCreate: allocated comm_adm at 0x2aa42a9f50
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x2aa47e3dd0
DpShMCreate: allocated gw_adm at 0x2aa47e3e50
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x2aa47e3e80
DpShMCreate: allocated wall_adm at 0x2aa47e3e90
MBUF state OFF
DpCommInitTable: init table for 5000 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x0x2aa7c31000
EsStdInit: Extended Memory 4096 MB allocated
Linux: Kernel does not support shared memory disclaiming
Linux: disclaiming for shared memory disabled
<ES> 4095 blocks reserved for free list.
ES initialized.
<ES> could not find 4116 connected blocks for chain 0.
ERROR => EgInit: EsCreateShared() failed. info='EG_GLOBAL_AREA', blocks=4116, rc=11 [egxx.c 307]
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 10416]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 10341]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 28 03:16:04 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Oct 27 16:16:04 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
--
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
16 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
17 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
18 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
19 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
20 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
21 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
22 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
23 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
24 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
25 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
26 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
27 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
28 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
29 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
30 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
31 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
32 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
33 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
34 ? -1 Free no 0 0 0
34 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 786]
35 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Wed Oct 27 16:16:04 2010
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 0 | 2000 | 0 | 0 |
--------
+
DIA | 0 | 0 | 2000 | 0 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Oct 27 16:16:04 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Oct 27 16:16:04 2010
=============================
=============================
Slots: 300, Used: 0, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 28 03:16:09 2010
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapkxtap03_AS0_65 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x55ba250 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0x7fbfffe8e0 )
ShmProtect( 1, 3 )
ShmProtect( key 1 valid )
ShmProtect( slot Index 0 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x2aa085d000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0x7fbfffe8e0 )
ShmProtect( 2, 3 )
ShmProtect( key 2 valid )
ShmProtect( slot Index 1 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x2aa0982000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0x7fbfffe8e0 )
ShmProtect( 3, 3 )
ShmProtect( key 3 valid )
ShmProtect( key 3 valid )
ShmProtect( slot Index 2 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x2aa489b000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 10, 14, 0, 2, 0x0x7fbfffe870 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 10, 11, 0, 2, 0x0x7fbfffe870 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 40, 42, 0, 2, 0x0x7fbfffe870 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe760 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 40, 43, 0, 2, 0x0x7fbfffe870 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe760 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 40, 45, 0, 2, 0x0x7fbfffe870 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe760 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 40, 44, 0, 2, 0x0x7fbfffe870 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe760 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 54 ) = 0740 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 40, 46, 0, 2, 0x0x7fbfffe870 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe760 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 40, 47, 0, 2, 0x0x7fbfffe870 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe760 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 65 ) = 0740 (octal)
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 10, 17, 0, 2, 0x0x7fbfffe870 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 34 ) = 0740 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 58 ) = 0740 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0x7fbfffe8e0 )
ShmProtect( 51, 3 )
ShmProtect( 51, 3 )
ShmProtect( key 51 valid )
ShmProtect( slot Index 50 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 51 prot 3/0 done
ShmCreate( 51, 0, 2, -> 0x0x2aa65ab000 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0x7fbfffe8e0 )
ShmProtect( 52, 3 )
ShmProtect( key 52 valid )
ShmProtect( slot Index 51 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x2aa5510000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 30 ) = 0740 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 56 ) = 0740 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0x7fbfffe8e0 )
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x2a97ba1000 )
ShmCleanup SHM_NO_BUFFER
ShmCleanup( 48 )
ShmCreate( 48, 0, 2, 0x0x7fbfffe8e0 )
ShmGet( 40, 48, 0, 2, 0x0x7fbfffe870 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe760 )
ShmKeyPermission( 40 ) = 0740 (octal)
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0x7fbfffe8d0 )
ShmProtect( 31, 3 )
ShmProtect( key 31 valid )
ShmProtect( slot Index 30 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 31 prot 3/0 done
ShmCreate( 31, 0, 2, -> 0x0x2aa5522000 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0x7fbfffe8e0 )
ShmProtect( 10, 3 )
ShmProtect( key 10 valid )
ShmProtect( slot Index 9 )
ShmProtect( slot Index 9 )
ShmProtect( Mode: 146000000 )
ShmCreate( 10, 0, 2, -> 0x0x2a97cbe000 )
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_POOL_50
ShmCleanup( 50 )
ShmCreate( 50, 0, 2, 0x0x7fbfffe8e0 )
ShmKeyPermission( 50 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0x7fbfffe8c0 )
ShmKeyPermission( 62 ) = 0740 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3244]
MpiCleanup() -> 1
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 8 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 15 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 17 ) = 0740 (octal)
SemKeyPermission( 18 ) = 0740 (octal)
SemKeyPermission( 19 ) = 0740 (octal)
SemKeyPermission( 20 ) = 0740 (octal)
SemKeyPermission( 21 ) = 0740 (octal)
SemKeyPermission( 22 ) = 0740 (octal)
SemKeyPermission( 24 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 31 ) = 0740 (octal)
SemKeyPermission( 35 ) = 0740 (octal)
SemKeyPermission( 36 ) = 0740 (octal)
SemKeyPermission( 37 ) = 0740 (octal)
SemKeyPermission( 42 ) = 0740 (octal)
SemKeyPermission( 43 ) = 0740 (octal)
SemKeyPermission( 44 ) = 0740 (octal)
SemKeyPermission( 45 ) = 0740 (octal)
SemKeyPermission( 47 ) = 0740 (octal)
SemKeyPermission( 48 ) = 0740 (octal)
SemKeyPermission( 49 ) = 0740 (octal)
SemKeyPermission( 50 ) = 0740 (octal)
SemKeyPermission( 51 ) = 0740 (octal)
SemKeyPermission( 53 ) = 0740 (octal)
SemKeyPermission( 54 ) = 0740 (octal)
SemKeyPermission( 55 ) = 0740 (octal)
SemKeyPermission( 56 ) = 0740 (octal)
SemKeyPermission( 57 ) = 0740 (octal)
SemKeyPermission( 58 ) = 0740 (octal)
SemKeyPermission( 59 ) = 0740 (octal)
SemKeyPermission( 62 ) = 0740 (octal)
SemKeyPermission( 63 ) = 0740 (octal)
SemKeyPermission( 64 ) = 0740 (octal)
SemKeyPermission( 65 ) = 0740 (octal)
SemKeyPermission( 66 ) = 0740 (octal)
SemKeyPermission( 67 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 70 ) = 0740 (octal)
SemKeyPermission( 72 ) = 0740 (octal)
removing Semaphore-Management
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 15138) [dpxxdisp.c 11531]
shutdown completed - server stopped ***
Follow the process given below.
1. Stopsap
2. In the linux, see if you get any return for "ipcs |grep <sidadm>"
Replace <sidadm> with the correct one.
If anything returns, you need to cleanup with "cleanipc <sysnr> remove" and "ipcrm -m (or) -s <shared memory number>"
use m or s depends on the list.
3. Check if you any other process running under SIDADM, if so kill them and start the SAP.
By the way howmuch memory is allocated.
Hi,
We are getting the following error.
EsStdUnamFileMapInit: ES base = 0x0x2aa7c31000
EsStdInit: Extended Memory 4096 MB allocated
Linux: Kernel does not support shared memory disclaiming
Linux: disclaiming for shared memory disabled
<ES> 4095 blocks reserved for free list.
ES initialized.
<ES> could not find 4116 connected blocks for chain 0.
ERROR => EgInit: EsCreateShared() failed. info='EG_GLOBAL_AREA', blocks=4116, rc=11 [egxx.c 307]
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 10416]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 10341]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
Hi Pasted below the output of sapfpar.
================================================================================
== Checking profile: SID_D65_sapkxtap03
================================================================================
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: rdisp/incr_spa_on_roll =1
***WARNING: Unexpected parameter: rdisp/max_com_msg =500
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/security/audit_++++++++
***ERROR: Size of shared memory pool 10 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 10
with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 10
with parameter: ipc/shm_psize_10 =146000000
Shared memory disposition overview
================================================================
Shared memory pools
Key: 10 Pool
Size configured.....: 116000000 ( 110.6 MB)
Size min. estimated.: 142581936 ( 136.0 MB)
Advised Size........: 146000000 ( 139.2 MB)
Key: 40 Pool for database buffers
Size configured.....: 746000000 ( 711.4 MB)
Size min. estimated.: 395095040 ( 376.8 MB)
Advised Size........: 398000000 ( 379.6 MB)
Shared memories inside of pool 10
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer
Key: 12 Size: 6000000 ( 5.7 MB) TemSe Char-Code convert Buf.
Key: 13 Size: 60500000 ( 57.7 MB) Alert Area
Key: 14 Size: 20000000 ( 19.1 MB) Presentation buffer
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity monitoring
Key: 17 Size: 5558768 ( 5.3 MB) Roll administration
Shared memories inside of pool 40
Key: 42 Size: 56512992 ( 53.9 MB) DB TTAB buffer
Key: 43 Size: 200502392 ( 191.2 MB) DB FTAB buffer
Key: 44 Size: 30518392 ( 29.1 MB) DB IREC buffer
Key: 45 Size: 17206392 ( 16.4 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 36865024 ( 35.2 MB) DB CUA buffer
Key: 48 Size: 500000 ( 0.5 MB) Number range buffer
Key: 49 Size: 2968344 ( 2.8 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key: 1 Size: 2500 ( 0.0 MB) System administration
Key: 2 Size: 61433596 ( 58.6 MB) Disp. administration tables
Key: 3 Size: 13714400 ( 13.1 MB) Disp. communication areas
Key: 4 Size: 523648 ( 0.5 MB) statistic area
Key: 6 Size: 1661337600 (1584.4 MB) ABAP program buffer
Key: 7 Size: 14838 ( 0.0 MB) Update task administration
Key: 8 Size: 268435556 ( 256.0 MB) Paging buffer
Key: 9 Size: 167772260 ( 160.0 MB) Roll buffer
Key: 18 Size: 3670116 ( 3.5 MB) Paging adminitration
Key: 19 Size: 285610000 ( 272.4 MB) Table-buffer
Key: 30 Size: 37888 ( 0.0 MB) Taskhandler runtime admin.
Key: 31 Size: 2406000 ( 2.3 MB) Dispatcher request queue
Key: 33 Size: 112640000 ( 107.4 MB) Table buffer, part.buffering
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin.
Key: 52 Size: 40000 ( 0.0 MB) Message Server buffer
Key: 54 Size: 245768192 ( 234.4 MB) Export/Import buffer
Key: 55 Size: 8192 ( 0.0 MB) Spool local printer+joblist
Key: 57 Size: 1048576 ( 1.0 MB) Profilparameter in shared mem
Key: 58 Size: 4096 ( 0.0 MB) Enqueue ID for reset
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository Buf.
Key: 65 Size: 4202496 ( 4.0 MB) Export/Import Shared Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0
Key: 58900165 Size: 4096 ( 0.0 MB) SCSA area
Nr of operating system shared memory segments: 28
Shared memory resource requirements estimated
================================================================
Total Nr of shared segments required.....: 28
System-imposed number of shared memories.: 1000
Shared memory segment size required min..: 1661337600 (1584.4 MB)
System-imposed maximum segment size......: 21340618752 (20352.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 3332.0 MB
..in pool 10 110.6 MB, 122% used !!
..in pool 40 376.8 MB, 52% used
..not in pool: 2811.3 MB
Processes........................: 507.3 MB
Extended Memory .................: 4096.0 MB
-
Total, minimum requirement.......: 7935.4 MB
Process local heaps, worst case..: 2048.0 MB
Total, worst case requirement....: 9983.4 MB
Errors detected..................: 1
Warnings detected................: 4
Hello,
you have error there:
***ERROR: Size of shared memory pool 10 too small
you got also solutions there:
SOLUTIONS: (1) Locate shared memory segments outside of pool 10
with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 10
with parameter: ipc/shm_psize_10 =146000000
Simply try what is recommended - to set up parameter ipc/shm_psize_10 =146000000 or to move some area away from shared memory segment if for some reason you do not wist or cannot enlard the pool.
Best regards.
The default value for the parameter em/global_area_MB is 96 MB. How much you have increased to? If you read the documentaion for parameter em/global_area_MB in RZ11.
Whenever you make any changes to profile parameters specially memory related you must perform sappfpar check (already mentioned above)
Hi,
> Linux: Kernel does not support shared memory disclaiming
> Linux: disclaiming for shared memory disabled
> <ES> 4095 blocks reserved for free list.
> ES initialized.
> <ES> could not find 4116 connected blocks for chain 0.
> *** ERROR => EgInit: EsCreateShared() failed. info='EG_GLOBAL_AREA', blocks=4116, rc=11 [egxx.c 307]
> *** ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 10416]
> *** ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 10341]
> *** DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
>
Check above error logs which shows that no memory is available on the system. Change the memory so that it should not use all the memory available.
Thanks
Sunny
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
86 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.