on 10-24-2010 7:27 PM
Hi gurus please help me as i am new to SMD and AIX
i have 7.0 ehp1 solution manager which has been upgraded from its previous version
now i have to do the SMD & WILY INTERSCOPE installation on solution manage as well as on
Enterprise portal (netweaver 7.0 sps 14)
as i have seen on many forum that 7.0 ehp1 (sps 18) smd server get install by default when we install
solution manager
but in my case i have checked the following directory /USR/SAP/<DASID> that does not exsit on solution manager file system
so its mean the SMD server is not installed on solution manager
so do i have to first install the SMD server on solution manager then
2) wily enterprise manager on solution manager
3) SMD agent on Enterprise portal
is there any way by which we can see SMD server is working on AIX like windows
please clear this SMD server concept
i will be very thankful to you
HI shiv jansi
i have seen you are very much in to solution manager and SMD Intsallation
i would like to tell you one more time my system details
1) i have solution manager 7.0 ehp1(sps23)
2) EP(dev) 7.0 sps(14)
acording to the SMD setup guide, I was using 7.11 SMD Agent and SAPinst which gui was not poping up.
later somebody told me to go with 7.0 sr1 SMD Agent
and i did in same way & i have gone all the way to complete installation on EP(DEV)
after completeing when i am executing SOLMAN_SETUP on solution manager
iam getting error in MANAGED SYSTEM CONFIGURATION step
checking the prerequisite
ERROR
" Software with prerequisite are incorrect
a) found J2EE ENGINE SERVERCORE 7.11 with sp level 0, minimum sp level required is 1
b) found SAP J2EE ENGINE 7.00 sp level 0 minimum sp level required is 9
Please can you help to overcome this problem i will very Thankfull to you
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi jansi thanks for ur suggestion i did in same way i went the directory where software is placed
after setting all the java variable and path for java policy file evev display is also working fine the xclock is running properly
then i typed ./sapinst -nogui
then result i have shown on the previous post but the problem is sapinst gui screen doest not come it remains same for next 3 to 4 hours then finely i have to cancel the screen then start the same i dont know where iam doing wrong
but from last 5 days i am trying to start the installation but it is not sapinst is not poping up please help me ASAP
advanced thanks
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI guru
Please help me i have set all the java varaible
JAVA_HOME
SAPINST_JRE_HOME
PATH
DISPLAY
every thing even i have set the ulimit also for root user
jce policy every thing
inflated: jce/COPYRIGHT.html
inflated: jce/README.txt
inflated: jce/US_export_policy.jar
inflated: jce/local_policy.jar
Starting GUIServer using:
SAPinst port : 21200
GUIServer port: 21212
HTTP port : 4239
GUI autostart : off
GUI mode : normal
command : /tmp/sapinst_exe.790676.1288292888/jre/bin/java -Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.790676.1288292888/JAR/instgui.jar SDTServer rootdir=//.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=localhost -srvarg=/SAPinstService/port=21200 guistart=off
Oct 28, 2010 7:08:32 PM Info: *************************
Oct 28, 2010 7:08:32 PM Info: Starting Server
Oct 28, 2010 7:08:32 PM Info: Reading server configuration.
Oct 28, 2010 7:08:32 PM Info: Reading service configuration SAPinstService.
Oct 28, 2010 7:08:32 PM Info: Configuring LogManager ...
Oct 28, 2010 7:08:32 PM Info: *************************************************
Oct 28, 2010 7:08:32 PM Info: Starting SL Controller listening on port 21212 ...
Oct 28, 2010 7:08:32 PM Info: StorageService switched off.
Oct 28, 2010 7:08:32 PM Info: Initializing SecurityManager ...
init: retrieving account information for group sapinst...
init: retrieving account information done.
Oct 28, 2010 7:08:34 PM Info: Server certificate fingerprint is 92 1D 51 AD DA 02 24 46 80 19 81 CC 35 99 0B D5
Oct 28, 2010 7:08:34 PM Info: Configuring HTTPManager ...
Oct 28, 2010 7:08:34 PM Info: WebstartService switched off.
Oct 28, 2010 7:08:34 PM Info: RoleService switched off.
Oct 28, 2010 7:08:34 PM Info: AlertService switched off.
Oct 28, 2010 7:08:34 PM Info: Starting NotesService ...
Oct 28, 2010 7:08:34 PM Info: ProcessService switched off.
Oct 28, 2010 7:08:34 PM Info: Starting MIDService ...
Oct 28, 2010 7:08:34 PM Info: Starting FileService ...
Oct 28, 2010 7:08:34 PM Info: LogService switched off.
Oct 28, 2010 7:08:34 PM Info: MailService switched off.
Oct 28, 2010 7:08:34 PM Info: Starting services ...
Oct 28, 2010 7:08:34 PM Info: Starting service "SAPinstService" ...
load resource pool /smd/SMD711_01_IM_AIX_PPC64/resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host ephdev, port 21200 to continue with the installation
Oct 28, 2010 7:08:34 PM Info: Service "SAPinstService" started
Oct 28, 2010 7:08:34 PM Info: Services started.
Oct 28, 2010 7:08:34 PM Info: Starting HTTP server listening on port 4239 ...
Oct 28, 2010 7:08:34 PM Info: HTTP server started.
Oct 28, 2010 7:08:34 PM Info: SL Controller started.
iam using j2sdk1.4.2_sr12 i have heard from some resources that this java version is not compatible with sap
please help me to overcome as iam using window pc connected aix server through(x manager)
sapinst gui is not poping up
thanks
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi
r u trying to start from remote server?
pls chk the below
Procedure on Windows
1. Log on to the installation host as a user with administrator rights.
2. Insert the DVD with the installation files in your DVD drive.
3. Enter the following commands:
cd <DVD_DRIVE>:\SAPinst\NT\I386
sapinst SAPINST_START_GUI=false
SAPinst now starts and waits for the connection to the SAPinst GUI.
You see the following at the command prompt:
*guiengine: no GUI connected; waiting for a connection on host <host_name>, port <port_number> to continue with the installation*
You can now start the SAPinst GUI on your local host, as described in Starting SAPinst GUI Standalone.
[sapinst on remore server|http://help.sap.com/saphelp_nw04/helpdata/en/67/08ce8b384cbd4a92a49d11d3f0af3a/content.htm]
jansi
Hi gurus please help me as i am new to SMD and AIX
i have 7.0 ehp1 solution manager which has been upgraded from its previous version now i have to do the SMD & WILY INTERSCOPE installation on solution manage as well as on Enterprise portal (netweaver 7.0 sps 14) as i have seen on many forum that 7.0 ehp1 (sps 18) smd server get install by default when we install solution manager but in my case i have checked the following directory /USR/SAP/<DASID> that does not exsit on solution manager file system so its mean the SMD server is not installed on solution manager so do i have to first install the SMD server on solution manager then
Do you have SMD sid under /USR/SAP/ ?
What SP LEvel of component LM-SERvice and ST400 do you have ?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi
you should check in your managed system (satelite system ) whether SMD installed or nt .while doing installaton it should be the requiring the SAP Installation Master 7.11 DVD required for this. if the Diagnostics agent is instaled on your managed system, there shoud be te folder as usr/sap/<DASID>/SMDA<00-97>/SMDAgent. please check in te managed system. if not follow the below guide to install the same.
[smd 711|https://websmp202.sap-ag.de/~sapidb/011000358700000952852009E]
you can view the smd availability by using SAP MNC. regarding wily also you refer the above guide.
thanks,
jansi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
thanks jansi
but now i move to next level of this problem as
i believe it doesnt exist on server and i have to install it
could you please help me that how to configure it with
managed system as well as configuration in solution manager for information i have
EP system is 700 sps 14 with user required to configure it
As I am totally new to SMD i have seen on forums that some guys doing config through
SOLMAN_SETUP some says Solman_workcenter(solution manger sps 23)
i will be very thankfull to you
Hi,
Please go to this link:
https://websmp208.sap-ag.de/solutionmanager
And look for documentation as this is not a 123 cook book.
Before continue farder you must update your Solman up to SPS 24 because your system is too low in level, then run solman_setup after that you need to do initian configuration and basic configuration but for this you better take a look at the documentation.
Good Luck
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.