Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_TIMEOUT

[Former Member]

Hi

We are trying to connect an external 3rd party HTTP content server which is a DMS itself.

We are trying to connect using SAP AL HTTP 4.5 interface. This is for enabling optical archiving (storing image on content server) and viewing image.We are using our content server for file system storage.

I have configured a repository named FD in tcode OAC0 also defined category in OACT.

when i click on test connection or CSADMIN it gives me error as Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_TIMEOUT.

we have increased HTTP timeout parameter to 180 sec still it gives me same error

ICM trace:

[Thr 4] IcmWriteToConn(id=1/18076): prepared to write data to partner (len

[Thr 4] NiIWrite: hdl 25 sent data (wrt=162,pac=1,RAW_IO)

[Thr 4] IcmWriteToConn(id=1/18076): wrote data to partner (len = 162)

[Thr 4] IcmNetBufFree: free netbuf: 0x100c1d0e0 out of 1 used

[Thr 4] MPI<7de>2#8 FreeInbuf#1 0 18e928 0 -> 0

[Thr 4] IcmConnRollInWP: no need to roll in WP status: ROLLED IN

[Thr 4] IcmReadFromConn(id=1/18076): request new MPI (0/0)

[Thr 4] MPI<7dd>0#4 GetOutbuf -1 18e928 65536 (0) -> 0xffffffff6d58e948 0

[Thr 4] NiIRead: hdl 25 recv would block (errno=EAGAIN)

[Thr 4] NiIRead: raw read for hdl 25 timed out (500ms)

[Thr 4] IcmReadFromConn: read failed with timeout: 500 -> roll out

[Thr 4] IcmSendMpiOOBData: send ICM_OOB_TYPE_TIMEOUT

[Thr 4] MPI<7dd>0#5 WriteOOB 00000000 00000002 00000001 00

[Thr 4] MPI<7de>2#11 ReadOOB 00000001 00000001 00000015 00 -> 0

[Thr 4] IcmHandleOOBData: Received data on 1st MPI (seqno: 1, type=1, reas

[Thr 4] MPI<7dd>0#10 ReadOOB 00000001 00000001 00000015 00 -> 0

[Thr 4] IcmHandleOOBData: Received data on 2nd MPI (seqno: 1, type=1, reas

[Thr 4] IcmHandleOOBData: Received context key (type=1, reason=1): 21/769/

[Thr 4] IcmConnRollOut: connection (id=1/18076) rolled out:

[Thr 14] NiSelISelectInt: 1 handles selected (0 buffered)

[Thr 4] CONNECTION (id=1/18076):

used: 1, type: 1, role: 2, stateful: 0

NI_HDL: 25, protocol: HTTP(1)

local host: 172.16.0.110:40675 ()

remote host: 10.36.1.41:9025 ()

status: READ_RESPONSE

connect time: 19.10.2010 09:52:58

WP-status: ROLLED OUT (Context: 2, Role: 2)

tid: 21, mode: 0, uid: 769, roll-reason: ICM_ROLL_NETTIMEOUT

MPI request: <7de> MPI response: <7dd>

request_buf_size: 0 response_buf_size: 65464

request_buf_used: 0 response_buf_used: 0

request_buf_offset: 0 response_buf_offset: 0

[Thr 4] IcmWorkerThread: Thread 0: Waiting for event

[Thr 14] NiHsLGetHostName: found address 127.0.0.1 in cache

[Thr 14] NiHsLGetHostName: retrying to get hostname for '127.0.0.1'

[Thr 14] NiIWakeupReceive: hdl 3 received 1 bytes from 127.0.0.1:44623

[Thr 14] IcmWatchDogUpdateRollQueue(id=1/18076): insert fe-nihdl 25, flags=.

Please suggest me some solution.

Thanks

Sandeep

[Former Member]

application was not available at that time. My DMS guy has solved this issue

[former_member683416]

Hello,

I am getting an error u201CError in HTTP access: If_http_client_-> ICM_HTTP_TIMEOUT u201C while posting document via ME23N on content server.(DMS)

Before few days it was working but suddenly it is giving above error.

I have searched the SDN for the above error but I am getting confused to analysis the error, I have tried checking log Dev_icm but it is not showing current date log in the file.

Please suggest the steps to be followed urgently to check and correct the error,

User are unable to attached the reference document to PO.

Regards,

Akash- BASIS consultant.

[Former Member]

Hi Akash,

Kindly post a new thread.

Regards

ABhishek