on 10-15-2010 11:51 AM
i have lot with 01 inspection type ,quantity 1.5 Litres,its a qualitative MIC with classed recording ,while result recording for this
quantity to be Accepted are rejected and partialy accepted,while entering the values i.e 1.5 its giving a error that is no decimal places are allowed,i checked all the Base units its all in Litres,how i overcome this type issue,
Yes system behaves as per setting you have done
1.You have selected Qualitative Char ,it means you should enter "accepted or rejected" etc.
but you have entered 1.5 this is a "Quantitative Value"
2.So You have make this char as "Quantitative" ,select the upper limit ,lower limit ,base value along with decimal places(say 2).
this will allow you to enter value 1.5 or 1.50 etc
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
If ur entering variables like 1.5 then MIC is Quantitative parameters not a Qualitative. Qualitative is for attributes only. For maintaining decimal places goto QS23 -->select MIC and click the contol indicators and enter number of decimal places field in the control indicators.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
85 | |
7 | |
6 | |
4 | |
3 | |
3 | |
3 | |
3 | |
3 | |
2 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.