on 10-04-2010 10:22 AM
Dear all,
One of my SAP user got the below error in SAP PROD server , kindly check below logs .
u201CIRP maximum work process hold time exceed. This may be caused by network problems or slow front-end-systems.u201D
Note : SAP Gui also latest installed , still the user got the above error .
Kindly suggest
hi,
The problem is to do with the GUI coonection to the server, could be a network glitch...
Try increasing this parameter.
Default is 60 secs. But use it wisely dynamic via RZ11 ECC6.
rdisp/max_hold_time
Mark
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
The parameter "rdisp/max_hold_time" will not solve the problem, in fact it can even hide the true root cause, I do not recommend increasing this parameter without a thorough analysis of the need.
In short, the process has exceeded the maximum time waiting for “actions” from the front end, this is usually related to slow/intermittent problems on your local network or the version of SAPGUI on the front end.
I recommend that you check with your network team its quality and performance, a simple test "ping -t" you can have a macro view of the response time and packet loss, also update the SAPGUI version on the front end.
Good luck!
Ronaldo Ribeiro
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Check SAP Notes 42789
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi John,
We are having the same issue, can you let me know what was the solution ?
Thanks,
Chetan.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I will check with Network team regarding this issue.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear all/Marcus/Mark,
Now the same user got another error ,kindly suggest .
IRP: connection to partner 'xx.xx.xx.xx:sapdp01' broken
WSAECONNRESET: Connection reset by peer
Do you want to see detailed error description?
Regards
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
This error message means that the SAP server (a workprocess) wanted to send data to the frontend (SAPGUI) but the frontend didn't either confirm that the data could be sent or the data didn'T reach the frontend at all.
As already specified in the error message itself this can be caused by a slow (swapping) frontend or by network problems.
Another reason can be local firewalls or firewalls between the server and the frontend.
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
82 | |
10 | |
10 | |
9 | |
6 | |
6 | |
5 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.