cancel
Showing results for 
Search instead for 
Did you mean: 

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Former Member
0 Kudos

Hello,

I am trying to include an ERP2005 system into an exisiting SLD. Due to some reason, I am facing the following error, while running the transaction RZ70:

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

When I tested the SM59 - RFC connection for SLD_NUC, its is working fine with out any errors.

I have read all the messages posted in the SDN and no luck with any of the solution.

I really appreciate your response.

Thank you,

Nikee

Accepted Solutions (0)

Answers (8)

Answers (8)

Former Member
0 Kudos

I know this is an old post.  But in case someone is searching.

Solution:  Delete both TCP/IP RFCs SLD_NUC and SLD_UC and rerun RZ70.  The tcode will generate new RFCs and this will fix the error.


Former Member
0 Kudos

This worked for me!

Former Member
0 Kudos

Hi Nikee,

Advanced, the I know this error is old, but I had the same problem and I can't see the aswer.

Try exclude the RFC SAPSLDAPI and do that:

RZ70 -> Standard RFC Destination

Execute again

This process create SLD_UC.

Former Member
0 Kudos

Hi Nikee,

Sorry.

I Posted it On Exchange Infrastructure Forums.

Please See it And Help me

Regards

Khanna

Former Member
0 Kudos

Hi Nikee,

Will u Please Help me I Got the Same Problem.

I Posted In Fourms With Name <b>"How To Create A Technical For Web AS ABAP ???" </b>

Please Go through it And Help me.

Helpfull Answers Will be Definately Rewarded

Regards

Khanna

Former Member
0 Kudos

Nikee,

I had the same problem. The way I fixed it was to make sure the SLD_UC and SLD_NUC are NOT defined anywhere in the VA. These two processes are created implicitly and should not be defined. Remove them from anywhere they appear in the VA, and recycle the gateway. You should then see that each program is registered twice in the SLD gateway and RZ70 should work.

Regards,

Casey

Former Member
0 Kudos

With this your RFC will not worked? Also, there will be Error logs in RZ70 data mentioning RFC connection failed, as program has not been registered.

Former Member
0 Kudos

Hey Casey,

Thanks for suggestion...

Helped me..

I removed SLD_UC from VA... and rz70 successful...

Thanks & Regards,

Ishan Sangai

Former Member
0 Kudos

hi, I have same problem, in RZ70 RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA', SLD is running.

Dali

Former Member
0 Kudos

I have the same problem. ERP2005 system to SLD. Via RZ70 I run "start data collector without job scheduling" and get:

SLD DS Start Program

0: er3dd01_DV1_00 : Execute program: SLDAPPL_SERV

0: er3dd01_DV1_00 : Execute program: SLDBCSYS

0: er3dd01_DV1_00 : Execute program: SLDCLIENT

0: er3dd01_DV1_00 : Execute program: SLDCOMPSYS

0: er3dd01_DV1_00 : Execute program: SLDDBSYS

0: er3dd01_DV1_00 : Execute program: SLDGWSRV

0: er3dd01_DV1_00 : Execute program: SLDINSTSC

0: er3dd01_DV1_00 : Execute program: SLDINSTSP

0: er3dd01_DV1_00 : Execute program: SLDIPSERV

0: er3dd01_DV1_00 : Execute program: SLDMSGSRV

0: er3dd01_DV1_00 : Execute program: SLDASSOC

0: er3dd01_DV1_00 : Collection of SLD data finished

0: er3dd01_DV1_00 : Data collected successfully

0: er3dd01_DV1_00 : RFC data prepared

0: er3dd01_DV1_00 : Test mode: No batch job created

I click "activate" and then "start data collection and job scheduling" and get:

SLD DS Start Program 1

0: er3dd01_DV1_00 : Execute program: SLDAPPL_SERV

0: er3dd01_DV1_00 : Execute program: SLDBCSYS

0: er3dd01_DV1_00 : Execute program: SLDCLIENT

0: er3dd01_DV1_00 : Execute program: SLDCOMPSYS

0: er3dd01_DV1_00 : Execute program: SLDDBSYS

0: er3dd01_DV1_00 : Execute program: SLDGWSRV

0: er3dd01_DV1_00 : Execute program: SLDINSTSC

0: er3dd01_DV1_00 : Execute program: SLDINSTSP

0: er3dd01_DV1_00 : Execute program: SLDIPSERV

0: er3dd01_DV1_00 : Execute program: SLDMSGSRV

0: er3dd01_DV1_00 : Execute program: SLDASSOC

0: er3dd01_DV1_00 : Collection of SLD data finished

0: er3dd01_DV1_00 : Data collected successfully

0: er3dd01_DV1_00 : RFC data prepared

0: er3dd01_DV1_00 : Used RFC destination: SLD_NUC

0: er3dd01_DV1_00 : RFC call failed: program SLD_NUC not registered / CPIC-CALL: 'ThSAPOCMINIT'#Transaction pr

0: er3dd01_DV1_00 : Program scheduled: 20060715 012300

0: er3dd01_DV1_00 : SLD job for system start: Program scheduled: SAP_SYSTEM_START

My SM59 fails for SLD_NUC saying it is not registered.

Former Member
0 Kudos

Hello Wayne,

Here is what you have to do:

1. SLD Server

Logon to the Visual Administrator

go to Server --> Services

JCO Destination

Here, please create/register the SLD_NUC service.

2. Once you are done with the above settings, the RFC will not fail.

Thank you,

Nikee

Former Member
0 Kudos

hello all:)

I have the same problem, with this SET_SLD_DATA. I think You have seen my post with the "FM, strange behaviour".

So the 1. that You have advised did not help in my case. Both SLD_UC and SLD_NUC have been already maintained there, and still rz70 says either:

1) success

or

2) fail

So the function SET_SLD_DATA is maintained somewhere in Web AS, and the SLD_NUC/SLD_UC does not see it(on only sometimes). The question ist, what one has to do to make the SET_SLD_DATA visible:)

Former Member
0 Kudos

Hello Simon,

I have gone thru your ticket. Could you please tell me what is name of the Function Module???

Thank you,

Nikee

Former Member
0 Kudos

hello Nikee,

I am not sure if I understood what You meant. Which function module?

regards

simon:)

former_member211905
Participant
0 Kudos

Hi Simon,

Where to set 'SET_SLD_DATA' visible then?

Regards

Øyvind

Former Member
0 Kudos

The function of Rz70 is to push informaiton from your current system though to the SLD.

An alternative way round this is to manually configure the business and technical systems in the SLD.

Former Member
0 Kudos

Can you advise which steps you have tried?

Former Member
0 Kudos

Hello Sajjad,

I have checked the SLD using SLDcheck, SM59 conenctivity.

Thank you,

Nikee