on 08-22-2010 10:11 AM
Dear Gurus,
The SAP router is giving issues.
I could not stop the router using the command "saprouter -r"
It gives the error below:
bash-3.00$ saprouter -s
Sun Aug 22 09:00:11 2010
SAP Network Interface Router, Version 38.10
Sun Aug 22 09:00:12 2010
***LOG Q0I=> NiPConnect: connect (146: Connection refused) [nixxi.cpp 2513]
ERROR => NiPConnect: SiConnect failed for hdl 0 / sock 3
(SI_ECONN_REFUSE/146; I4; ST; 127.0.0.1:3299) [nixxi.cpp 2513]
ERROR => RTADMINREQ::sendAdminReq: NiBufConnect failed (rc=-10) [nirout.cpp 5649]
*****************************************************************************
*
LOCATION SAProuter 38.10 on 'MLDSAP'
ERROR partner 'localhost:3299' not reached
*
TIME Sun Aug 22 09:00:12 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 2
*
*****************************************************************************
I killed the process with the UNIX command kill -9.
The router is some "unknown" state and I cannot start it up again.
BR,
Tolu
Edited by: Juan Reyes on Aug 23, 2010 9:42 AM
Dear all,
below is the log file of the command saprouter -r -V3 -T
-
trc file: "file.out", trc level: 3, release: "700"
-
Tue Sep 7 08:27:19 2010
NiHsLInit: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 at 0x1002fd220)
NiIInit: host/serv bufs already initialized
NiPGetNodeAddrList: got 5 interface(s) from operating system
[ 0-lo0 ] IPv4-Address: 127.0.0.1 UP
[ 1-ce0 ] IPv4-Address: 10.0.0.3 UP
[ 2-ce2 ] IPv4-Address: 0.0.0.0 DOWN
[ 3-ce3 ] IPv4-Address: 10.10.10.3 UP
[ 4-eri0 ] IPv4-Address: BBB.BBB.BBB.BBB UP
SAP Network Interface Router, Version 38.10
Compiled Dec 12 2009 01:29:33
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V3
command line arg 3: -T
command line arg 4: file.out
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : file.out
logfile : no logging active
portrange : no portrange active
local address : default address
NiBufISetParam: set max heap to 20000000
NiSetParamEx: switch NIP_CONNLOCAL off
NiIMyHostName: hostname = 'ZZZZZ'
main: pid = 15580, ppid = 15577, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiITraceByteOrder: CPU byte order: big endian, network, high val..low val
NiIBind: hdl 0 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIListen: state of hdl 0 NI_LISTEN
NiIListen: listen for client requests on hdl 0
NiSelICreateSet: new set0
SiSelPInit: allocate 141816 bytes for FI (811)
NiSelIInit: size of set0 is 811
SiSelPSet: sock 4 added to set pos 0
NiSelIAddMsg: added hdl 0 to set0
SiSelPSet: set events of sock 4 to: rp-
reading routtab: './saprouttab'
NiStrToAddrMask: 'YYY.YYY.YYY.YYY' -> YYY.YYY.YYY.YYY [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '3299' = port 0C.E3/3299
NiStrToAddrMask: 'YYY.YYY.YYY.YYY' -> YYY.YYY.YYY.YYY [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiStrToAddrMask: 'YYY.YYY.YYY.YYY' -> YYY.YYY.YYY.YYY [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '8001' = port 1F.41/8001
NiStrToAddrMask: 'YYY.YYY.YYY.YYY' -> YYY.YYY.YYY.YYY [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '8001' = port 1F.41/8001
NiStrToAddrMask: 'BBB.BBB.BBB.BBB' -> BBB.BBB.BBB.BBB [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '8001' = port 1F.41/8001
NiStrToAddrMask: 'YYY.YYY.YYY.YYY' -> YYY.YYY.YYY.YYY [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiStrToAddrMask: 'BBB.BBB.BBB.BBB' -> BBB.BBB.BBB.BBB [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '8001' = port 1F.41/8001
contents of routtab ('./saprouttab', 6 entries):
P, :: :: YYY.YYY.YYY.YYY ffff:ffff:ffff: 3299 *
P, YYY.YYY.YYY.YYY ffff:ffff:ffff: :: :: * *
P, :: :: YYY.YYY.YYY.YYY ffff:ffff:ffff: 8001 *
P, YYY.YYY.YYY.YYY ffff:ffff:ffff: :: :: 8001 *
P, :: :: BBB.BBB.BBB.BBB ffff:ffff:ffff: 8001 *
P, YYY.YYY.YYY.YYY ffff:ffff:ffff: BBB.BBB.BBB.BBB ffff:ffff:ffff: 8001 *
NI-ROUTER LOOP ********
SiSelPSelect: start select (timeout=-1)
any help?
BR,
Tolu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I suspect it could not be started because the tunnel was not open to the remote site.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
ERROR partner 'localhost:3299' not reached
The error msg seems that the sap router service is not running. Check whether u are able to test the RFC destination "SAPOSS" from any of ur SAP system. If no, then u can be sure that the service is not running.
Regards,
Varadharajan M
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
if you are using SNC then saprouter -s command will not work. the start command would be something like this.
saprouter -r -G ./routerlog -S 3299 -K "p:CN=yourhostname, OU=0000nnnnnn, OU=SAProuter, O=SAP, C=DE" &
Try that out...
Edited by: Venkatesh Koukuntla on Aug 23, 2010 4:35 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
86 | |
10 | |
10 | |
9 | |
6 | |
6 | |
6 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.