on 07-10-2010 6:26 PM
Hello All,
My solution manager system was down.So I tried to restart the system.Though msg_server has been started but dev_disp is not getting started.I tried but unable to start it.Pasting dev_disp trace file.
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid TKS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 700
Thu May 07 22:27:49 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 700) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu May 07 22:27:54 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >solman_TKS_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 6142MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 6144MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1535 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 4740
argv[0] = E:\usr\sap\TKS\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\TKS\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\TKS\SYS\profile\TKS_DVEBMGS00_solman
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=TKS
argv[7] = -DSAPMYNAME=solman_TKS_00
argv[8] = -DSAPPROFILE=E:\usr\sap\TKS\SYS\profile\TKS_DVEBMGS00_solman
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( solman) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >solman_TKS_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Thu May 07 22:27:55 2009
DpJ2eeLogin: j2ee state = CONNECTED
Thu May 07 22:27:57 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 216
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4355) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4740)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu May 07 22:28:34 2009
ERROR => DpHdlDeadWp: W0 (pid 3460) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 4644) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4404) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 536) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 5076) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 3152) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3608) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 2292) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 4300) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 2912) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 3748) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 2132) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 2532) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4084) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W14 (pid 2336) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 4584) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 3208) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=369
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 07 22:28:44 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu May 07 16:58:44 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 3460 Ended no 1 0 0
1 DIA 4644 Ended no 1 0 0
2 DIA 4404 Ended no 1 0 0
3 DIA 536 Ended no 1 0 0
4 DIA 5076 Ended no 1 0 0
5 DIA 3152 Ended no 1 0 0
6 DIA 3608 Ended no 1 0 0
7 DIA 2292 Ended no 1 0 0
8 DIA 4300 Ended no 1 0 0
9 DIA 2912 Ended no 1 0 0
10 UPD 3748 Ended no 1 0 0
11 ENQ 2132 Ended no 1 0 0
12 BTC 2532 Ended no 1 0 0
13 BTC 4084 Ended no 1 0 0
14 BTC 2336 Ended no 1 0 0
15 SPO 4584 Ended no 1 0 0
16 UP2 3208 Ended no 1 0 0
Dispatcher Queue Statistics Thu May 07 16:58:44 2009
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 5 | 5 |
--------
+
DIA | 5 | 5 | 2000 | 5 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu May 07 16:58:44 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu May 07 16:58:44 2009
=============================
Slots: 300, Used: 1, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=369
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 07 22:28:49 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >solman_TKS_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 244 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 244 (pos=3)
SiSelNRemove: removed sock 244
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 244
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 700) [dpxxdisp.c 10421]
Please describe how you fixed the problem. People read these threads because they face similar problems and it is VERY frustrating when a thread ends in "solved" with no explanation of how it was sovled.
Help your fellow SDNers out and share the fix.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
solved
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I tried to rebbot the system many times but in vain.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Did you try to a kernel upgrade - Check SAP note 19466.
The standard way for updating kernel patch is:
1. Bring down SAP system and database.
2. Kill manually any processes that did not die.
3. Cleanipc <central instance no> remove and cleanipc <appln server no.> remove
4. Tar up/store the entire /sapmnt/<SID>/exe directory for possible need to revert back to kernel.
5. Copy tar file to safelocation
6. SAPCAR the kernel SAR files in the EXE Directory.
7. Verify ownership/permissions of file for <sid>adm and those that need to be for ora<sid> (such as brtools) and some for root (such as icmbnd) (assume you're using ORACLE).
8. and FINALLY, start the SAP system
Please ensure that no processes are running on the system. It is also vital to ensure that the library contained in the shared memory on the system is updated correctly.
Also do make sure your DBSL library is updated correctly also.
Also as per your below error is relating to work process, please check the below link for solution :-
http://help.sap.com/saphelp_bw/helpdata/en/1f/8311664bc511d189750000e8322d00/content.htm
Please check the server Defaut Trace log from /usr/sap/SID/j2ee/cluster/serverX/log/defaultTrace.#.trc in server directory
Please also post the DEV_W0 trace file, so we can understand why is ending abnormally. Check below link for help :-
Award points if helpful **
Regards,
Manomeet Mohapatra
User | Count |
---|---|
95 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.