cancel
Showing results for 
Search instead for 
Did you mean: 

No QM for storage location

Former Member
0 Kudos

My requirement is if material is received to certain storage location, it should not generate inspection lot.For remaining all storage locations, quality is required.How is it possible?

Accepted Solutions (1)

Accepted Solutions (1)

Former Member
0 Kudos

It is possible with the enhancement.

Vishal

Former Member
0 Kudos

which enhancement it is possible

Former Member
0 Kudos

Use QAAT0001.

Vishal

Answers (2)

Answers (2)

former_member42743
Active Contributor
0 Kudos

You can't limit QM by Storage location.

Waht I usually recommend is to copy the standard MM you would use and create a custom one, i.e. 411 to 911. Turn off QM for the 911 movement type in configuration. Users are then trained that when receiving to storage location xxxx they must use movement type 911. You could check with your MM people than to see if you can use a user exit in the MM to verify that the correct MM isbeing used if certain storage locations are being used.

FF

Former Member
0 Kudos

When 901 movement is used for GR error message is coming as change the inspection stock of material in qm only.

former_member42743
Active Contributor
0 Kudos

Then movement isn't turned off or you used an existing PO to do the receipt against. Use a new purchase req and purchase order for testing.

FF

Former Member
0 Kudos

Hi,

Please mention the inspection type you are using or the scenario you need to do.

Regards,

Naveen.

Former Member
0 Kudos

reuirement is for 01 and 04 inspection types.

Former Member
0 Kudos

Hi Sandip...

@firefighter is saying right. You can nt control Qm for storage location.

you can copy movement type and use it.

Thanks

Jeetendra