Installation Error - Issue

[Former Member]

I am getting the following please help:

F:\usr\sap\DEM\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP

F:\usr\sap\DEM\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]

Compiled Nov 25 2008 23:45:24

F:\usr\sap\DEM\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -loadprocedure fast

(DB) INFO: connected to DB

(DB) INFO: /SLOAS/XML deleted/truncated

Interface access functions from dynamic library dbmssslib.dll loaded.

(IMP) INFO: ExeFastLoad failed with <2: BCP failed:[0] Invalid character value for cast specification>

(IMP) ERROR: ExeFastload: rc = 2

(DB) INFO: disconnected from DB

F:\usr\sap\DEM\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)

F:\usr\sap\DEM\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100606012212

[Former Member]

Thanks that did not work either, was told to back everything out and go to an earlier version that the file may be currupt from the download. Painful indeed.

[emmerich_fodor]

New Approach:

Were now about to install with sapinst option u2026/sapinst SAPINST_SET_STEPSTATE=true

to replace the kernel by a newer version.

The previously downloaded one was outdated.

Define a break after the kernel has been applied then replace the kernel (both parts).

Then continue with the installation.

This worked!

[Former Member]

Emmerich,

Nope that did not work either got the same error message after following the steps you gave. Still having that cast problem. I even pulled the export files fresh from the marketplace and tried those just in case but that was not either.

Any other suggestions are more than welcome.

[emmerich_fodor]

The Taskfile SAPAPPL0 shows 1 or more lines marked "err"

It shows the table name of the table which could not be inserted or filled with data.

You should replace the "err" mark by "xeq" for execute.

Then open SQL-Studio and delete that table and mark the appropriate action to be repeated with "xeq".

Then run sapinst again "old options" to try to repeat that/those actions.

I could not test this procedure so far as I can not access the server by SQL-Studio - I am trying to find out how to delete the /SLOAS/XML with sqlcli...

Let me know if it worked

good luck

[Former Member]

This is what comes up when I run that command:

F:\usr\sap\DEM\SYS\exe\uc\NTAMD64>R3trans -d

This is R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).

unicode enabled version

2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."

R3trans finished (0012).

I tried stopping and restarting the machine and then restarting the sapinst did not work get same error.

Memory on this box is 10GB physical and 25GB virtual. MSSQL server is running on a minimum of 4GB and a max of 6GB.

Thanks

[Former Member]

Hi Vega,

It seems it is giving error while importing SAPAPPL0 package, did u perform resource check preparation while doing actual installation, what is your RAM size and Virtual Memory.

can you post sapinst and R3trans logs for further investigation

Please update the status

Regards,

Laxman

[Former Member]

SAPINST.log:

INFO 2010-06-06 01:20:38.885

Creating file C:\Program Files\sapinst_instdir\x.

INFO 2010-06-06 01:20:38.901

Removing file C:\Program Files\sapinst_instdir\x.

INFO 2010-06-06 01:20:56.983

Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\x.

INFO 2010-06-06 01:20:56.983

Removing file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\x.

INFO 2010-06-06 01:21:00.046

Creating file C:\Program Files\sapinst_instdir\x.

INFO 2010-06-06 01:21:00.046

Removing file C:\Program Files\sapinst_instdir\x.

INFO 2010-06-06 01:21:03.938

Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/statistic.30.xml'.

INFO 2010-06-06 01:21:06.594

Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/statistic.31.xml'.

WARNING 2010-06-06 01:21:19.722

Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.

INFO 2010-06-06 01:21:27.114

Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.13.xml'.

INFO 2010-06-06 01:21:27.771

Execute step

Component W2K_ServicePack_Check|ind|ind|ind|ind

Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0

INFO 2010-06-06 01:21:48.009

Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/keydb.11.xml'.

INFO 2010-06-06 01:21:48.197

Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/statistic.32.xml'.

INFO 2010-06-06 01:21:48.416

Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0

INFO 2010-06-06 01:21:55.855

Switched to user: demadm.

INFO 2010-06-06 01:21:55.886

Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\import_monitor.java.log.

INFO 2010-06-06 01:21:55.917

Switched to user: demadm.

INFO 2010-06-06 01:21:55.964

Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS.

INFO 2010-06-06 01:21:55.964

Output of "C:\Program Files\Java\jdk1.6.0_17\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.

WARNING 2010-06-06 01:22:26.299

Execution of the command ""C:\Program Files\Java\jdk1.6.0_17\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:

java version "1.6.0_17"

Java(TM) SE Runtime Environment (build 1.6.0_17-b04)

Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode)

Import Monitor jobs: running 1, waiting 1, completed 28, failed 0, total 30.

Loading of 'SAPAPPL0' import package: ERROR

Import Monitor jobs: running 0, waiting 1, completed 28, failed 1, total 30.

ERROR 2010-06-06 01:22:26.299

CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.

ERROR 2010-06-06 01:22:26.471

FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).

INFO 2010-06-06 01:22:31.3

An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".

INFO 2010-06-06 01:22:33.472

Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.

INFO 2010-06-06 01:22:33.769

Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\__instana_tmp.xml.

[Former Member]

Hi Vega,

For workaround try to stop sapinst and start with old installation option if still problem persists, please post R3trans log ( command is R3trans -d)

Regards,

Laxman