on 03-30-2010 8:34 AM
Hi,
when i start the server its showing the message Fail: The system cannot find the file specified.createfile failed in plugin_pi pef open() and ended in yellow display.Please help me to solve this error.
Hi Pugazh,
Post the contents of file dev_disp and dev_ms which you can find in Drive:/usr/sap/<SID>/DVEBMGS00/work.
Regards
Sourabh Majumdar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2664
Mon Mar 29 14:55:08 2010
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2664) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Mar 29 14:55:13 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >biemi_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( biemi) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >biemi_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Mon Mar 29 14:55:48 2010
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Edited by: pugazh raj on Mar 30, 2010 11:47 AM
trc file: "dev_ms", trc level: 1, release: "700"
-
[Thr 2152] Mon Mar 29 14:55:08 2010
[Thr 2152] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2568
[Thr 2152] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2568) [msxxserv.c 1824]
[Thr 2152] MsInitAclInfo: acl file D:\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2152] MsGetOwnIpAddr: my host addresses are :
[Thr 2152] 1 : [192.168.1.212] biemi (HOSTNAME)
[Thr 2152] 2 : [127.0.0.1] biemi (LOCALHOST)
[Thr 2152] MsHttpInit: full qualified hostname = biemi
[Thr 2152] HTTP logging is switch off
[Thr 2152] set HTTP state to LISTEN
[Thr 2152] ms/icf_info_server : deleted
[Thr 2152] *** I listen to port sapmsNSP (3600) ***
[Thr 2152] *** I listen to internal port 3900 (3900) ***
[Thr 2152] *** HTTP port 8100 state LISTEN ***
[Thr 2152] CUSTOMER KEY: >P1437911867<
Hi Pugazh
Please check the following before stating the server :-
- Update JAVA_HOME system enviromental variable in my computer (My computer > Priperties >> Advance >> Startup and
Recovery >> Enviromental Variable >> System Variables >> Add new JAVA_HOME parameter with path for installed Java JDK)
- Check database server services (Start > Run > Services.msc >> Start your database services manually and change
properties as automatic)
- Update your server IP address and host name in host file entry at (Start > RUN > drivers > etc > host file)
- Message server : -Start > RUN > drivers > etc > services and add an entry
sapms<System ID> 36<System Number>/tcp
Then try to start your server.
Hope it helps
Regards
Arun
Hi arun,
Thanks i solved the problem by ur instruction
Please check the following before stating the server :-
- Update JAVA_HOME system enviromental variable in my computer (My computer > Priperties >> Advance >> Startup and
Recovery >> Enviromental Variable >> System Variables >> Add new JAVA_HOME parameter with path for installed Java JDK)
- Check database server services (Start > Run > Services.msc >> Start your database services manually and change
properties as automatic)
- Update your server IP address and host name in host file entry at (Start > RUN > drivers > etc > host file)
- Message server : -Start > RUN > drivers > etc > services and add an entry
sapms<System ID> 36<System Number>/tcp
Then try to start your server.
User | Count |
---|---|
83 | |
10 | |
10 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.