on 03-08-2010 6:34 AM
Dear All,
I have created SAPOSS RFC Connection for download SAP Notes from SNOTE.
During connection test the following error ocured :
Error Details Error when opening an RFC connection
Error Details ERROR: sapserv2a: route permission denied (203.88.142.212 to oss001, sapmsOSS
Error Details LOCATION: SAProuter 39.2 (SP4) on 'sapserv2a'
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 8
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: -93
Error Details SUBRC: 0
Error Details RELEASE: 710
Error Details TIME: Mon Mar 8 07:12:36 2010
Error Details VERSION: 39
Thanks in Advance,
Nirav
Delete AI_RUNTIME_JCOSERVER(RFC connection between the Java engine and the ABAP engine) and create it again.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
sapserv2a: route permission denied
You need to maintain your saprouttab and allow sapserv2a in port 3299
Read the documentation http://service.sap.com/saprouter
regards
Juan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Swathi,
check your router is working or not.Especially router permissions.
Best Regards,
Shyam Dontamsetty
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear All
I have checked from my side , below is a SAPROUTAB entries.
#SNC-connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3389
#Permission entries to check if the connection is allowed at all
P sapserv2 192.168.0.17 3200
P sapserv2 192.168.0.17 3200
P * sapserv2 3299
P * 194.39.131.34 3299
P * 192.168.0.17 3200
P * 192.168.0.17 3299
P * * *
Is there any requirement to add entries in above details.
We have mentioned sapserv2 in saproutab,
Error shows sapserv2a.
Regards
As you said sapserv2a is not on saprouttab. If I was you i'll check which on is the right one to use (you can do that by reading the docs at SAP Marketplace on the URL above) and then either change the config on the saprouttab or change the info in OSS1 -> Parameter -> technical settings or in SM59 in your systems
Regards
Juan
Thanx for your reply.
I have corrected entry in OSS1 -> TEch. Patameter
Now , Present config. of OSS1 is ,
SAProuters at Customer Site :
NAme : rlssma (Host Name where SAP router installed)
IP Address : 192.168.0.17
Instance NO. : 99
SAProuter and SAPNet Message Server at SAP :
NAme : sapserv2
IP Address : 194.39.131.34
Instance No. 99
Now i am getting following error during connection test,
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout while pending for route completion
Error Details LOCATION: SAP-Server rlssma_SM2_00 on host rlssma (wp 0)
Error Details DETAIL: NiErrSet
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 110
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: -12
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Mon Mar 08 17:56:51 2010
Error Details VERSION: 38
SAP router is working and also checked Firewall setting and is OK
WE have also check srvices file at OS level, and is OK
Thans & Regards
I am testing from SM59 only.
Server string is also same which you have mentioned. Only thing is insted of 3299, in our string sapdp99 which has
relevent entry in services file at c:\windows\system32\drivers\etc.
we have also tried to change as per your suggestion but probelm remain same.
regards
Hi,
this is your route tab
#SNC-connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
# SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3389
#Permission entries to check if the connection is allowed at all
P sapserv2 192.168.0.17 3200
P sapserv2 192.168.0.17 3200
P * sapserv2 3299
P * 194.39.131.34 3299
P * 192.168.0.17 3200
P * 192.168.0.17 3299
P * * *
Do the following step and let us know the output
Test whether ports is open from you sap router to SAP ( check via telnet as follows )
login to OS of your saprouter and run the following command through command prompt
telnet 194.39.131.34 3299
check what is the output of above command , if ouput is not succesful , then it mean ports are not open from your saprouter to SAP .
Get the ports open from network team.
if the output is succesful , then let us know we can move forwarded for furture analisys.
Thanks
Anil
Thanx for your reply.
telnet command telnet 194.39.131.34 3299 is not successful.
THe error message is given below.
·NI_RTERR' GERR1connection timed out-5NI (network interface)71039nirout.cpp660
0RTPENDLIST::timeoutPend: no route received within 15s (CONNECTED)Tue Mar 9 08:
06:00 20101525323SAProuter 39.2 (SP4) on 'sapserv2a'ERR
Connection to host lost.
Regards
Hi ,
Ok moving forward.
1. make the changes in saprouttab as below
#SNC-connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
# SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.17 3201
#Permission entries to check if the connection is allowed at all
P 192.168.0.17 194.39.131.34 3299
D * * *
2. Restart SAP router .
3. Goto SM59 and delete RFC SAPOSS
4. Goto OSS1 and click on technical settings and then click on change and then click on SAVE and now click on logon button ( it will create new RFC again and let us know what output you get when you click on logon button.
If you get dialog box saying to login to SAP AG server it mean you have connected succesfuly to SAP router
Thanks
Anil
Hi,
1. Stop saprouter .
2. Rename dev_route file to dev_route_old
3. start saprouter again and check dev_route is there any error
if there is no error then move forward.
click on test rfc connetion , let the error get generated.
Once error is generated , immediate check saprouter log file i.e dev_route.
Paste the content of dev_route , paste the error part only.
Thanks
Anil
User | Count |
---|---|
84 | |
25 | |
12 | |
9 | |
6 | |
6 | |
5 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.