on 03-03-2010 1:34 AM
Dear experts ;
i had an error after upgrading my ECC 6 kernel from 169 to patch level 185 and the below the DEV_DISP
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 80
sid SP2
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 185
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2408
Tue Mar 02 14:37:43 2010
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (80 2408) [dpxxdisp.c 1285]
shared lib "dw_xml.dll" version 185 successfully loaded
shared lib "dw_xtc.dll" version 185 successfully loaded
shared lib "dw_stl.dll" version 185 successfully loaded
shared lib "dw_gui.dll" version 185 successfully loaded
shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3980
Tue Mar 02 14:37:49 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAP-TEST_SP2_80 <
DpShMCreate: sizeof(wp_adm) 22784 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0B0050, size: 6607008)
DpShMCreate: allocated sys_adm at 000000000F0B0050
DpShMCreate: allocated wp_adm at 000000000F0B21F0
DpShMCreate: allocated tm_adm_list at 000000000F0B7AF0
DpShMCreate: allocated tm_adm at 000000000F0B7B50
DpShMCreate: allocated wp_ca_adm at 000000000F65B3D0
DpShMCreate: allocated appc_ca_adm at 000000000F6611D0
DpShMCreate: allocated comm_adm at 000000000F663110
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F6E9DA0
DpShMCreate: allocated gw_adm at 000000000F6E9E20
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F6E9E50
DpShMCreate: allocated wall_adm at 000000000F6E9E60
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Tue Mar 02 14:37:50 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]
***LOG Q0K=> DpMsAttach, mscon ( SAP-TEST) [dpxxdisp.c 12429]
DpStartStopMsg: send start message (myname is >SAP-TEST_SP2_80 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 185
Release check o.K.
Tue Mar 02 14:38:30 2010
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:40 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 12
wake_evt_udp_now 0
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:48 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:49 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:50 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:51 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:52 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:53 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:54 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:55 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:56 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3204 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=409
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 02 14:38:57 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3204 HANDLE:384)
DpStartStopMsg: send stop message (myname is >SAP-TEST_SP2_80 <)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Mar 02 14:38:58 2010
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12775]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 312 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 312 (pos=2)
SiSelNRemove: removed sock 312
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 312
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2408) [dpxxdisp.c 10973]
Good Bye .....
pappreciate your quickly respond
BR
Ahmed Taha
SAP Admin
run sap 2ee server administration usr / sap / j2ee/// configtool and run configtool.exe. (make sure your sapmmc is running already, let it be around 10 - 15 mins after you have started) doesnt matter if disp+work.exe is yellow.
now in the j2ee configtool window.. make the following changes.
select dispatcher (in some its global dispatcher) --- managers --- Threadmanager.
In the right side.. check Initialthread , Minthread n Maxthread... set them all to defaults.. except Minthread.. let it be around 30.
save changes and restart sapmmc.. the disp+work.exe will turn into green for sure but might take little time about 5 mins.
the concept becomes like.. better late than never.
worked for me.
good luck.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
i solved my issue
i put the kernel update under \usr\sap\SID\SYS\exe\uc\
and also under \usr\sap\SID\DVEBMGS80\exe
and all are working perfect
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
As told by Mark, paste the latest ERROR line from your trans.log or dev_w0
Regards,
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Addition to MARK's update:
sqlplus> alter user SAPSR3 accout unlock;
Regards,
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Can you run R3trans -x from the command line and paste the trans.log here.
Mark
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 03.03.2010 - 15:01:36
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Mar 03 15:01:38 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 3829 0.003829
4 ETW000 [dev trc ,00000] using "D:\usr\sap\SP2\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000 20 0.003849
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 8 0.003857
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 14 0.003871
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 151 0.004022
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 12 0.004034
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 20 0.004054
4 ETW000 [dev trc ,00000] New connection 0 created 14 0.004068
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 21 0.004089
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.004102
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 11 0.004113
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 16 0.004129
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 217 0.004346
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 5321 0.009667
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 15 0.009682
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 1801 0.011483
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 13 0.011496
4 ETW000 [dev trc ,00000] Connecting as /@SP2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 16 0.011512
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.011528
4 ETW000 [dev trc ,00000] 0 UTF8 1 000000000760F090 0000000000311760 0000000000316F28
4 ETW000 74 0.011602
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 14 0.011616
4 ETW000 [dev trc ,00000] Allocating server context handle 10 0.011626
4 ETW000 [dev trc ,00000] Attaching to DB Server SP2 (con_hdl=0,svchp=0000000000316DE8,srvhp=000000000762E0E8)
4 ETW000 31 0.011657
4 ETW000 [dev trc ,00000] Assigning server context 000000000762E0E8 to service context 0000000000316DE8
4 ETW000 14689 0.026346
4 ETW000 [dev trc ,00000] Allocating user session handle 23 0.026369
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000000316DE8,srvhp=000000000762E0E8,usrhp=0000000000311F78)
4 ETW000 21 0.026390
4 ETW000 [dev trc ,00000] Assigning user session 0000000000311F78 to service context 0000000000316DE8
4 ETW000 23340 0.049730
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=55, stmth_p=0000000007637A28)
4 ETW000 27 0.049757
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE (:A0, :A1); END;
4 ETW000 15 0.049772
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=55, stmth_p=0000000007638A80)
4 ETW000 65 0.049837
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO (:A0); END;
4 ETW000 14 0.049851
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0000000007638A80)
4 ETW000 484 0.050335
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 21 0.050356
4 ETW000 [dev trc ,00000] Connected to session 60. 367 0.050723
4 ETW000 [dev trc ,00000] Now '/@SP2' is connected: con_hdl=0, nls_hdl=0, session_id=60.
4 ETW000 20 0.050743
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0000000007638A80)
4 ETW000 22 0.050765
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 21 0.050786
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0000000007638A80)
4 ETW000 255 0.051041
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 21 0.051062
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 452 0.051514
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 11 0.051525
4 ETW000 [dev trc ,00000] Rolling back transaction ... 60 0.051585
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=0000000000316DE8,usrhp=0000000000311F78)
4 ETW000 140 0.051725
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 312 0.052037
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@SP2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 21 0.052058
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 21 0.052079
4 ETW000 [dev trc ,00000] 0 UTF8 1 000000000760F090 0000000000311760 0000000000316F28
4 ETW000 24 0.052103
4 ETW000 [dev trc ,00000] Assigning username to user session 0000000000311F78
4 ETW000 32 0.052135
4 ETW000 [dev trc ,00000] Assigning password to user session 0000000000311F78
4 ETW000 24 0.052159
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000000316DE8,srvhp=000000000762E0E8,usrhp=0000000000311F78)
4 ETW000 25 0.052184
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=28000
4 ETW000 2463 0.054647
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=000000000762E0E8)
4 ETW000 12 0.054659
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0000000000316DE8,srvhp=000000000762E0E8)
4 ETW000 13 0.054672
4 ETW000 [dev trc ,00000] Deallocating server context handle 000000000762E0E8
4 ETW000 371 0.055043
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '28000'
4 ETW000 37 0.055080
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 28000 18 0.055098
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 28000 performing CON [dblink#5 @ 431]
4 ETW000 81 0.055179
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-28000: the account is locked [dblink#5 @ 431]
4 ETW000 12 0.055191
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'SP2'"
Hi,
***LOG BY0=>ORA-28000: the account is locked
Looks like your database user account is locked...
Try this from the command line : SQL> alter user SAPSR3 identified by (password) account unlock;
Note: I am assuming you are using default SAPSR3 as the user. The (password) is the password you used when you installed.
Then try R3trans -x again and examine the trans.log
Mark
Hi Ahmad,
BY0=>ORA-28000: the account is locked
To unlock your account fire the below query.
alter user SAPSR3 accout unlock;
commit;
BY0=> ORA-01017: invalid username/password; logon denied
The password in SAPUSER table is wrong. To change the password in SAPUSER table use below query
DELETE FROM "OPS$<sid>ADM".SAPUSER;
INSERT INTO "OPS$<sid>ADM".SAPUSER VALUES ('SAPSR3','<password>')
in <password> give your password.
Thanks,
Sachin Sable
Go through SAP Note 400241, as mentioned by other Techie.
Try to start you DB and SAP independantly and paste dev_w0 ERROR lines, only if above note doesn't help!
Regards,
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
this is also DEV_w0 value
-
trc file: "dev_w0", trc level: 1, release: "700"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
*
B
B Tue Mar 02 14:37:50 2010
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\SP2\DVEBMGS80\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\SP2\DVEBMGS80\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\SP2\DVEBMGS80\exe\dboraslib.dll' is "700.08", patchlevel (0.167)
B New connection 0 created
M sysno 80
M sid SP2
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 185
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 668
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 668) [dpxxdisp.c 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000110B0050, size: 6607008)
M DpShMCreate: allocated sys_adm at 00000000110B0050
M DpShMCreate: allocated wp_adm at 00000000110B21F0
M DpShMCreate: allocated tm_adm_list at 00000000110B7AF0
M DpShMCreate: allocated tm_adm at 00000000110B7B50
M DpShMCreate: allocated wp_ca_adm at 000000001165B3D0
M DpShMCreate: allocated appc_ca_adm at 00000000116611D0
M DpShMCreate: allocated comm_adm at 0000000011663110
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000116E9DA0
M DpShMCreate: allocated gw_adm at 00000000116E9E20
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000116E9E50
M DpShMCreate: allocated wall_adm at 00000000116E9E60
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Tue Mar 02 14:37:51 2010
M ThInit: running on host SAP-TEST
M calling db_connect ...
C Prepending D:\usr\sap\SP2\DVEBMGS80\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SP2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000012AB28C0 000000000A9842F0 000000000A989B18
C Attaching to DB Server SP2 (con_hdl=0,svchp=000000000A9899D8,srvhp=0000000012AD1918)
C Starting user session (con_hdl=0,svchp=000000000A9899D8,srvhp=0000000012AD1918,usrhp=000000000A984B08)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
[dboci.c 4532]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11145]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@SP2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000012AB28C0 000000000A9842F0 000000000A989B18
C Starting user session (con_hdl=0,svchp=000000000A9899D8,srvhp=0000000012AD1918,usrhp=000000000A984B08)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
[dboci.c 4532]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11145]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10524]
M
M Info for wp 0
M
M pid = 668
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAP-TEST_SP2_80 on host SAP-TEST (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Mar 02 14:37:51 2010
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10744
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 668) [dpnttool.c 333]
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
> Version of 'D:\usr\sap\SP2\DVEBMGS80\exe\dboraslib.dll' is "700.08", patchlevel (0.167) ORA-01017: invalid username/password; logon denied
Firstly, could you make sure you have the corresponding DBSL kernel? I notice that it says dbsl 700 030508, which doesn't match the date for level 185. It's 167. BTW, why not to use the latest kernel?
If DBSL is not the problem, please refer to note 400241 for the solution of error ORA-01017.
Regards,
Effan
Hi,
Are you able to logon to database using "sqlplus / as sysdba" ?
If you failed to login, just check the below parameter in <drive>:\oracle\<SID>\network\admin\sqlnet.ora
and <drive>:\usr\sap\<SID>sys\profile\oracle\sqlnet.ora
It should be
SQLNET.AUTHENTICATION_SERVICES = (NTS)
It must be authentication issue...
Also check the profile parameter dbs_ora_tnsname = <DBSID>
Regards.
Rajesh
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.