on 02-25-2010 2:50 PM
Hi,
I am created Interface objects in IR but it is not reflected in SPROXY (ECC 5.0). It is showing like this no connection to integration builder (Only local data visible) please can you help me necessary configuration.
Regards,
-Prabakar.A
In your business system (ECC, SRM, whatever) go to SM59 and create the SAPSLDAPI TCP/IP RFC. Point it at the Jco Program you set up in your SLD system. Also make sure your SLD_UC RFC is pointing to the same host (don't change the registered server program from SLD_UC as this RFC runs natively when the SLD starts up). Use Registered Server Program setting and host name of your XI system. Then rerun your SLDCHECK.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi experts thanks for your suggestions. It was helped me a lot.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Prabakar,
the Business System SM59 destinations LCRSAPRFC & SAPSLDAPI
should have the Program IDs
SAPSLDAPI _UNICODE.
LCRSAPRFC_UNICODE
See the online help for connecting Biusiness Systems
[Connecting Unicode Business Systems|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
see also
[Connecting to the Integration Server|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
Regards
Kenny
Edited by: Kenny Scott on Feb 25, 2010 5:02 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
You can create the entires manually , this are normally the post installation steps which needs to be carried out by the installation team.
In Business System(ECC) Create 2 rfc destiamtions in SM59 destinations LCRSAPRFC & SAPSLDAPI od type TCP/IP type.
the program id will be
SAPSLDAPI _< sis id >.
LCRSAPRFC_< sis id > 3 letters you can get it from SAP logon pad
this proram ids needs to be created in visual admin or NWA other wise your connection test will not work.
Make the required entries in SLDAPICUST t-code.
Maintain the configuration required in SXMB_ADM
Regards,
Sunil.
Hi Prabhakar,
the SM59 (type T) destinations need to be created in the Business System.
For connecting Business systems the Program ID should be -
for Unicode Business Systems
LCRSAPRFC_UNICODE
SAPSLDAPI_NUNICODE
for non Unicode Business Systems
LCRSAPRFC_NONUNICODE
SAPSLDAPI_NONUNICODE
There should be corresponding entries on the XI/PI Java Engine
The Configuration Guide has a section on connecting Business Systems for ABAP Proxy use.
Regards
Kenny
Hi Prabhakar,
yes you have to create the SM59 destinations in your Business System.
Try folllowing section -
8 Connecting Business Systems with an Integration Engine to the Central Integration Server
[XI Configuration Guide|http://service.sap.com/nw04installation]
scroll down page
-> SAP XI
The guide is for XI 3.0 but this section is good for subsequent releases.
Regards
Kenny
Edited by: Kenny Scott on Feb 26, 2010 10:39 AM
Hi,
Follow this steps:
1.- Check SLDAPICUST and set correctly.
2.- Go to SM59 TA and check LCRSAPRFC and SAPSLDAPI destinations.
3.- Check that user PIRWBUSER exist in ECC.
4.- Go to SXMB_ADM ->Integration Engine Configuratio Data -> Role of Business System must be Application Server.
5.- TA SLDCHECK.
Best regards
Ivá
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Did you activate ABAP Proxy ? If not, have a look at /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies .
Regards,
Sunil Chandra
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Chandra,
I am trying to create RFC destination for HTTP but in the path i entered it is giving this error. For your information ECC 5.0 and PI 7.0 are the systems.
Path Prefix: /sap/xi/engine/?type=entry
Query String not Allowed.
and also it is asking some more fields:
HTTP Proxy Options:
(Global configuration)
Proxy Host:
Proxy Service:
Proxy User:
Prosy Password: (INITIAL)
also add a entry for the J2EE port in tcode SLDAPICUST
u will find the port in the URL of the home page ( normally like 50XXX)
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
this is because the proxy connectivity is not properly set up between ECC and PI
run tcode SLDCHECK on ECC ..it should not give any red messages
also run report SPROX_CHECK_IFR_ADDRESS to check the connectivity
i hope u have followed all the steps of connectivity between the PI and ECC that needs to be done in case of proxy
u can also serach on forum as this is a coomon error
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Tarang,
I checked with the transacation SLDCHECK it is sowing following messages.
TEST LCR Connection:
1.RFC destination SAPSLDAPI does not exist.
2.Connection to SLD does not work
(Check SLD function and configuration)
Access to the XI Profile:
RFC Destination LCRSAPRFC does not exist.
I checked the t code SPROXY_CHECK_IFR_ADD:
but it is sowing SPROXY_CHECK_IFR_ADD does not exist.
Edited by: PRABHAKAR REDDY A on Feb 25, 2010 9:15 PM
hi prabhakar,
this 2 RFCS LCRSAPRFC and SAPSLDAPI should be avaible by default in the TCP/IP connections
if not avaiable ...u have to create the same..it requires several details..may be u can ask the basis guys to look into this
Also one type H rfc should be created in ECC pointing to XI and one in type H rfc in XI point ing to ECC
Edited by: Tarang Shah on Feb 25, 2010 10:25 PM
User | Count |
---|---|
84 | |
24 | |
12 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.