on 06-13-2006 2:36 PM
Hi guys,
I am in the process of migrating system for the below
source system
IDES ECC 5.0
WebAS 6.40
MSSQL 2000 SP4/8.00
Target system
IDES ECC 5.0
WebAS 6.40
ORACLE 9.2.0.6
I am currently stuck at the migration key. At the heterogeneous system copy screen stage -> Database load which is asking for a migration key. I always got the error -> wrong migration key and unable to proceed.
We registered the key at service.sap.com/migrationkey on the source system's installation no.
kindly advise any experience of such and any other possible solution or alternative. Thks
Steven
We eventually we got through a long series of Wrong Migration Key errors by making the OS and DB selections as generic as possible. That is, rather than trying to specify the exact version of Oracle, Linux and Unix, from the drop-down lists, we selected Linux and Unix without versions, and likewise with Oracle, even though we were also upgrading Oracle at the same time, from 9.2 to 10.2.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello guys!
Solution you can find in note https://service.sap.com/sap/support/notes/970518
Best regards, Jaikbayev Bakhtiyar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi All,
I'm also facing same problem in Import ABAP Phase,
Error Message: " The migration key for a heterogeneous system copy is wrong. SOLUTION: Enter a valid migration key."
Source System: OS/400
DB: DB2 UDB for Iseries, 7.1
SAP: Solman 7.1
Target System: Linux 6
DB: DB2 LUM 10.1
SAP: Solman 7.1
Also I tried with “1G5fdEM50DwIrBzjt6TE5Pae ” (valid until 31/DEC/14) Key which is available in 1768158 (1768158 - System Copy of Systems Based on SAP NW 7.0 / 7.0 EHP 1-3 ) SAP note, but no luck.
Regards,
Vino
Hi Steven,
Even I have strucked my migration process in same step at import abap phase
Could you please help me in solving this issue if you have done.
i have generate the migration key from service market place.
At the initial stage of the migration process i have given the migration key it took it
But now it is asking for a valid migration key
Could you help me in solving the issue
source system is
win 2003with mssql as database
target system is
linux with maxdb as database
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear all:
I also have a similar error message:
source system:
DEV:SAP R/.3 4.71,non-Unicode system,kernel 640_64bit level 247
OS:AIX 5.3 64BIT
DB:ORACLE 9.2.0.4.0 64BIT
target system:
QAS:SAP R/.3 4.71,non-Unicode system,kernel 640_EX2_64bit level 247
OS:WIN2003 R2 64BIT (AMD64)
DB:ORACLE 10.2.0.2.0 64BIT
MIGKEY.log
***********************************************************************************************************************
D:\usr\sap\QAS\SYS\exe\run/R3load.exe: START OF LOG: 20090114161506
D:\usr\sap\QAS\SYS\exe\run/R3load.exe: sccsid @(#)
$Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\QAS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 17 2008 23:18:48
D:\usr\sap\QAS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program
Files\sapinst_instdir\R3E47X2
\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL0.cmd -l MIGKEY.log -K
1G5fdEM50TIIrBzjt6TE5Pae
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(CNV) ERROR: rscpMCInit rc = 2048
-
3-
code: 2048 RSCPENOCONV
convert MDMP to Unicode during export only
module: rscpexmh location: 4 line: 424
TSL01: CQI p3: MDMP&->&1100&during export only&&
-
.
D:\usr\sap\QAS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\QAS\SYS\exe\run/R3load.exe: END OF LOG: 20090114161506
How to solve this issue?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Please guys:
if you post logfiles, please put code tags around them (mark the pasted text and press on the "<< >>" sign next to the "underline" button. This will prevent that the backend will interpret the input and makes the logs much more readable.
Are those systems single codepage systems or MDMP systems? If the latter, then you need to enter "MDMP" as export codepage (not 1100 as by default). To make this field editable for non-numeric characters, follow the section "System copy of MDMP systems:" to change dialog.xml in
Note 970518 - Hom./Het.System Copy SAP NetWeaver 7.0 (2004s) SR2
although that note is for 7.00 it also works for 6.40 based kernels.
Markus
Hi,
Use the following migration key (valid until 31/DEC/08):
1G5fdEM50TMIrBzjt6TE5Pae
This is as per the note 970518
Thaslim
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
I had the same error, Found that the environment variables was not set, I added it and some other variables as well and it solved the problem.
The variables that I changed:
SAPSYSNAME
DIR_LIBRARY
db_ora_tnsname
PATH
good luck
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Steven
Please use the default Migration key for any heterogen sys copy " 1G5fdEM50T1IrBzjt6TE5Pae" as per SAP note 970518. Hope you should be through with this silly error.
Best luck
Samiran
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
more info about error. I even tried the below.
1.SAPF12 - F12 is homogeneous copied to sapec1 -F12 successfully.
2.exported from sapec1-F12-SQL (same source / target system)
3.import as sapec1-EC1-ORA. - STILL no luck and stuck with migration key error.
4.r3load / ldctl similar version or latest version and etc.
5. extracted error migkey.log.
6. Source: Rel6.40(Non-unicode,IDES ECC 5.0,POSSIBLE WITH MDMP)
7. Good solution will be rewarded with points.
8. Tried Note: 788924 - no luck and was for unicode system.
9. Loaded also latest R3load.* and dboraslib.* (on target)
---
D:\usr\sap\EC1\SYS\exe\run\R3load.exe: START OF LOG: 20060905160733
D:\usr\sap\EC1\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/640_LO_REL/src/R3ld/R3load/R3ldmain.c#1 $ SAP
D:\usr\sap\EC1\SYS\exe\run\R3load.exe: version R6.40/V1.4
D:\usr\sap\EC1\SYS\exe\run\R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\SAPAPPL0.cmd
-l MIGKEY.log -K 1WagdUM50T001eqtdAQt1aev
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(CNV) ERROR: rscpMCActivate rc = 2048
.--
.| RSCP - Error
|| Error from: Codepage handling (RSCP) || code: 2048 RSCPENOCONV
Wanted conversion not available. || in character code "MDMP" unknown ||
module: rscpc no: 22 line: 12409 T100: TS012 || TSL01: F43 p3: MDMP
|`----
'
D:\usr\sap\EC1\SYS\exe\run\R3load.exe: job finished with 1 error(s)
D:\usr\sap\EC1\SYS\exe\run\R3load.exe: END OF LOG: 20060905160750
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
I got the same error:
###############################################
RSCP - Error
Error from: Codepage handling (RSCP)
code: 2048 RSCPENOCONV Wanted conversion not available
in character code "MDMP" unknown
module: rscpc no: 22 line: 12897 T100: TS012
TSL01: F43 p3: MDMP
when I tried to load an db export into a MaxDB system.
A new R3load returned the same error.
Is there a solution available?
Regards, Armin
###############################################
RSCP - Error
Error from: Codepage handling (RSCP)
code: 2048 RSCPENOCONV Wanted conversion not available
in character code "MDMP" unknown
module: rscpc no: 22 line: 12897 T100: TS012
TSL01: F43 p3: MDMP
#############################################
Maybe you can check the language configuration and export log of the source sytem.
For example: SAPAPPL0.log
(CNV) WARNING: conversion from MDMP to 1100 not possible
Correct language config and export again maybe can solve this problem.
(To change language config is dangerous. check notes 838403 and Backup)
Edited by: Chen stanley on Jul 14, 2008 4:47 AM
-extraced from logs.
-both system was using R6.40/V1.4.
-Migration key is masked off.
-any suggestion/idea is appreciated.
migkey.log
-
F:\usr\sap\EC1\SYS\exe\run/R3load.exe: START OF LOG: 20060619101345
F:\usr\sap\EC1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_LO_REL/src/R3ld/R3load/R3ldmain.c#1 $ SAP
F:\usr\sap\EC1\SYS\exe\run/R3load.exe: version R6.40/V1.4
F:\usr\sap\EC1\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL0.cmd -l MIGKEY.log -K 1WUxxxxxxxxxxxxxxxx
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
F:\usr\sap\EC1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
F:\usr\sap\EC1\SYS\exe\run/R3load.exe: END OF LOG: 20060619101345
extracted from sapinst.log
-
INFO 2006-06-19 10:16:56
Working directory changed to D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB.
INFO 2006-06-19 10:16:56
See 'F:\usr\sap\EC1\SYS\exe\run/R3load.exe -dbcodepage 1100 -i "D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL0.cmd" -l MIGKEY.log -K 1WUfxxxxxxxxxxxxxxx' output in 'D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\R3load.exe.log'.
INFO 2006-06-19 10:16:56
'F:\usr\sap\EC1\SYS\exe\run/R3load.exe -dbcodepage 1100 -i "D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL0.cmd" -l MIGKEY.log -K 1WUfxxxxxxxxxxxxxxx' returned with '2'.
INFO 2006-06-19 10:17:28
Creating file D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\R3load.exe.log.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
It's a long shot, but have a look at note 459899, in particular the section below that is a direct copy from the note, this also mentions the DBSL_CMD_IMP_FUNS_SET error you've been getting & another potential fix. Yes it's about 3 years old & is for a BW install, but its Oracle & an R3Load process failing with the same error you currently have.
good luck, you never know....
beyond that I know from personal experience that migration keys can either work straight off or be very very frustrating for no obvious reason! I recommend checking with SAP if it is possible to migrate an IDES system (i'd be suprised if you can't)
Danny
-12/FEB/02-R/3LOAD error due to non-default mount directory-------
You must use the default mount directory /sapmnt for your SAP System, otherwise R3LOAD cannot connect.
DO NOT even use "/sapmnt/<SAPSID>".
If you have already run in this problem, the following string exists in the SAP<TABART>.log, for example SAPAPPLO.log:
"... (DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20... "
Solution:
a) Open file <SAPinst_INSTDIR>/keydb.xml
b) Search for string
<table name="tORA_Environment" namespaces="DBMODORA WAPS">
c) Adjust DIR_LIBRARY path in row
<row>
<fld name="dbSid">
<strval><![CDATA[BW1]]>< /strval>
</fld>
<fld name="SapSystemName">
<strval><![CDATA[BW1]]>< /strval>
</fld>
<fld name="Name">
<strval><![CDATA[DIR_LIBRARY]]>< /strval>
</fld>
<fld name="Value">
<strval><![CDATA[/sapmnt/BW1/exe] ]></strval>
Enter here exactly the sapmnt path that is mentioned in the
SAP<TABART>.log.
</fld>
</row>
d) Save your settings.
e) Run ./sapinst in your <SAPinst_INSTDIR>
Steven, I've had trouble in past with migration keys that has eventually been traced back to different versions of 'R3load' being used for the export and import.
If possible make sure R3load is the exact same release & patch level during the export and import. I have found this applies even if you are moving to a different OS platform.
Hope that helps
Regards
Danny
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thks for guys's prompt input. but still doesn't work despite r3load same release / version.
1. wondering, if we permit to migration IDES system.
2. also checked this 2 notes without luck
813964 - Migration Key Wrong - Release 4_7 and Web AS 6_x.htm
338372 - Migration key does not work.htm
Steven
Hi
Please enter the hostname in proper case.
(as found in hostname command)
Also make sure that installation numbers and source and target DB's are correctly selected while key generation.
Also check SPA note 813964 for details
ravinder
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.