on 01-28-2010 7:29 AM
Dear Friends,
The dis+work process of the SAP MMC remains yellow for some time and then stops.
The developer trace is as below (Due to the character limit a part of the trace is left out) :
=========================================================================
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid J2E
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 236
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 656
Thu Jan 28 12:06:43 2010
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 656) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 236 successfully loaded
shared lib "dw_xtc.dll" version 236 successfully loaded
shared lib "dw_stl.dll" version 236 successfully loaded
shared lib "dw_gui.dll" version 236 successfully loaded
shared lib "dw_mdm.dll" version 236 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Jan 28 12:06:47 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPx64_J2E_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D2D0050, size: 6614144)
DpShMCreate: allocated sys_adm at 000000000D2D0050
DpShMCreate: allocated wp_adm at 000000000D2D2270
DpShMCreate: allocated tm_adm_list at 000000000D2D96D0
DpShMCreate: allocated tm_adm at 000000000D2D9730
DpShMCreate: allocated wp_ca_adm at 000000000D87CFB0
DpShMCreate: allocated appc_ca_adm at 000000000D882DB0
DpShMCreate: allocated comm_adm at 000000000D884CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000D90B980
DpShMCreate: allocated gw_adm at 000000000D90BA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000D90BA30
DpShMCreate: allocated wall_adm at 000000000D90BA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Thu Jan 28 12:06:48 2010
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8189MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8192MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 2584
argv[0] = D:\usr\sap\J2E\SYS\exe\uc\NTAMD64\jcontrol.exe
argv[1] = D:\usr\sap\J2E\SYS\exe\uc\NTAMD64\jcontrol.exe
argv[2] = pf=
SAPx64.ritam.com\sapmnt\J2E\SYS\profile\J2E_DVEBMGS00_SAPx64
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=J2E
argv[7] = -DSAPMYNAME=SAPx64_J2E_00
argv[8] = -DSAPPROFILE=
SAPx64.ritam.com\sapmnt\J2E\SYS\profile\J2E_DVEBMGS00_SAPx64
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( SAPx64) [dpxxdisp.c 12650]
DpStartStopMsg: send start message (myname is >SAPx64_J2E_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
Thu Jan 28 12:06:49 2010
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 236
Release check o.K.
Thu Jan 28 12:07:28 2010
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 28 12:07:38 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 28 06:37:38 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 1468 Ended no 1 0 0
1 DIA 468 Ended no 1 0 0
2 DIA 1028 Ended no 1 0 0
3 DIA 2660 Ended no 1 0 0
4 DIA 360 Ended no 1 0 0
5 DIA 2160 Ended no 1 0 0
6 DIA 2592 Ended no 1 0 0
7 DIA 2284 Ended no 1 0 0
8 DIA 1568 Ended no 1 0 0
9 DIA 1764 Ended no 1 0 0
10 UPD 1412 Ended no 1 0 0
11 ENQ 704 Ended no 1 0 0
12 BTC 1408 Ended no 1 0 0
13 BTC 3068 Ended no 1 0 0
14 BTC 2324 Ended no 1 0 0
15 SPO 2504 Ended no 1 0 0
16 UP2 2348 Ended no 1 0 0
Dispatcher Queue Statistics Thu Jan 28 06:37:38 2010
===========================
=========================================================================
Recently, a DNS server was set up. Due to some non-SAP issues, the DNS server was uninstalled. Now the application server is not using any domain - simply the default workgroup.
From the trace, it seems like the DNS settings need to be adjusted. since the DNS server is uninstalled, I am not sure what settings need to be adjusted. Any help would be appreciated.
Regards,
TS
Post erros on dev_w0
Regards
Juan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Log of dev_w0 pasted below.
Regards,
TS
-
-
trc file: "dev_w0", trc level: 1, release: "700"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 00
M sid J2E
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 236
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1468
M
M
M Thu Jan 28 12:06:48 2010
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1468) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F2D0050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000F2D0050
M DpShMCreate: allocated wp_adm at 000000000F2D2270
M DpShMCreate: allocated tm_adm_list at 000000000F2D96D0
M DpShMCreate: allocated tm_adm at 000000000F2D9730
M DpShMCreate: allocated wp_ca_adm at 000000000F87CFB0
M DpShMCreate: allocated appc_ca_adm at 000000000F882DB0
M DpShMCreate: allocated comm_adm at 000000000F884CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F90B980
M DpShMCreate: allocated gw_adm at 000000000F90BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F90BA30
M DpShMCreate: allocated wall_adm at 000000000F90BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Thu Jan 28 12:06:49 2010
M ThInit: running on host SAPx64
M
M Thu Jan 28 12:06:50 2010
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.211)
B
B Thu Jan 28 12:06:51 2010
B New connection 0 created
C
C DBSDBSLIB : version 700.08, patch 0.211 (Make PL 0.221)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.211) MVCC support for MaxDB (note 1332203)
C (0.204) Sapinst on windows/maxdb stop with error (note 1323436)
C (0.202) NUMC conversion corrected (note 1288313)
C (0.189) Default value for max. input variables is 2000 (note 655018)
C (0.189) Profile parameter to define max. input variables (note 655018)
C (0.188) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.188) Input parameters for SQL statements increased (note 655018)
C (0.184) Create index serial for MaxDB 7.6 (note 1267841)
C (0.184) More trace in case of packed to string conversion error (note 1262799)
C (0.182) R3trans export aborts with signal 6 (note 1262245)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.3 BUILD 009-123-163-622
C SQLDBC client runtime is MaxDB 7.6.3.009 CL 163622
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 113]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#3 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1502]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10631]
M
M Info for wp 0
M
M pid = 1468
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPx64_J2E_00 on host SAPx64 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jan 28 12:06:51 2010
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10851
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1468) [dpnttool.c 333]
-
Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
check if this helps.
https://service.sap.com/sap/support/notes/39439
regards,
dev
User | Count |
---|---|
84 | |
23 | |
11 | |
9 | |
8 | |
5 | |
5 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.