cancel
Showing results for 
Search instead for 
Did you mean: 

SCC8 Client Copy ended with Error

Former Member
0 Kudos

Dear All

I have a problem in client copy. (SAP_ALL)

Note other client copy for smaller profile like (SAP_USERS) is done smoothly.

when I run the process it start smoothly and run for around 70 to 90 min.

Than end up with error.

in sm37 it say finished with green signal

but when we checked in SCC3 this message is Ended with Error.

System Detail is

AIX 5.3

SAP ECC6

transport version 255 in EHP and 266 in EHQ.

Detail of error in log file is

**********************************************

tail -f /usr/sap/trans/log/CC000030.EHP

4 ETA344 Table "T2512" is not copied because it belongs to another client

4 ETA344 Table "T2514" is not copied because it belongs to another client

4 ETA344 Table "T25B2" is not copied because it belongs to another client

4 ETA344 Table "T25B4" is not copied because it belongs to another client

3 ETA343 Function module "RKE_CC_EXCLUDE_TABLES" has excluded " 6" tables from copy

4 ETA114 Runtime " 2" seconds

3 ETA072 Exit program "RKE_CC_EXCLUDE_TABLES" successfully executed "18:17:20"

4 ETA112 "CLIENTCOPY_SELECT_TEXTID_ALL" executed. " 408" entries found

4 ETA114 Runtime " 0" seconds

3 ETA072 Exit program "CLIENTCOPY_SELECT_TEXTID_ALL" successfully executed "18:17:20"

2 ETA090 Command file for "tp" is written under: "EHPKT00030" "18:22:30"

2 ETA091 For client transport, " 50,865" entries entered in command file

2 ETA090 Command file for "tp" is written under: "EHPKX00030" "18:22:30"

2 ETA091 For client transport, " 408" entries entered in command file

2 ETA375 Transport program TP started successfully for "EHPKX00030" "18:22:31"

1 EXT200 Transport control program tp ended with error code "0016""A tool used by tp broke down""EXPORT EHPKT00030 client400 U18 pf=/usr/sap

1 ETA377 Error exporting request "EHPKT00030" "19:38:26"

1 ETA146 Program ended with error or warning, return code: "F"

1 ETA027 Runtime (seconds) : " 4,900"

1 ETA152 End of processing: "19:38:26"

****************************************************************

Thanks in Advance.

Accepted Solutions (1)

Accepted Solutions (1)

Former Member
0 Kudos

Hi,

firstly you are not doing a client copy.....you are running an Client EXPORT..

have you enough space on the filesystem ?

do you actually need to do a local or remote client copy ? (No one should be on the source client when copying for data consistency)

Mark

Former Member
0 Kudos

Dear Mark Norman

Yes File System space is more then enough.

You are right its a client export.

::::do you actually need to do a local or remote client copy ? (No one should be on the source client when copying for data consistency):::

I need to copy transactional data plus Customization data from Live production system in one of Quality Client.

Just a copy of production so we can test Financial Closing.

Thank You

Former Member
0 Kudos

Hi,

If you are client exporting data from live while the data is changing you are not going to get a clean consistant run.

could you not refresh your QA environment with production data ?? (system Copy)

Mark

Former Member
0 Kudos

Hi,

No we want to do it in weekend (live mean data of live system).

I took a suggestion from 1 consultant about system copy but he says it will took around 28 hours.

Wen have limitations of downtime we cannot make system down for 28 hours.

Syed Saifuddin

Former Member
0 Kudos

Dear All

Can we stick to the actual problem

I have a problem in client copy. (SAP_ALL)

Note other client copy for smaller profile like (SAP_USERS) is done smoothly.

when I run the process it start smoothly and run for around 70 to 90 min.

Than end up with error.

in sm37 it say finished with green signal

but when we checked in SCC3 this message is Ended with Error.

System Detail is

AIX 5.3

SAP ECC6

transport version 255 in EHP and 266 in EHQ.

Detail of error in log file is

**********************************************

tail -f /usr/sap/trans/log/CC000030.EHP

4 ETA344 Table "T2512" is not copied because it belongs to another client

4 ETA344 Table "T2514" is not copied because it belongs to another client

4 ETA344 Table "T25B2" is not copied because it belongs to another client

4 ETA344 Table "T25B4" is not copied because it belongs to another client

3 ETA343 Function module "RKE_CC_EXCLUDE_TABLES" has excluded " 6" tables from copy

4 ETA114 Runtime " 2" seconds

3 ETA072 Exit program "RKE_CC_EXCLUDE_TABLES" successfully executed "18:17:20"

4 ETA112 "CLIENTCOPY_SELECT_TEXTID_ALL" executed. " 408" entries found

4 ETA114 Runtime " 0" seconds

3 ETA072 Exit program "CLIENTCOPY_SELECT_TEXTID_ALL" successfully executed "18:17:20"

2 ETA090 Command file for "tp" is written under: "EHPKT00030" "18:22:30"

2 ETA091 For client transport, " 50,865" entries entered in command file

2 ETA090 Command file for "tp" is written under: "EHPKX00030" "18:22:30"

2 ETA091 For client transport, " 408" entries entered in command file

2 ETA375 Transport program TP started successfully for "EHPKX00030" "18:22:31"

1 EXT200 Transport control program tp ended with error code "0016""A tool used by tp broke down""EXPORT EHPKT00030 client400 U18 pf=/usr/sap

1 ETA377 Error exporting request "EHPKT00030" "19:38:26"

1 ETA146 Program ended with error or warning, return code: "F"

1 ETA027 Runtime (seconds) : " 4,900"

1 ETA152 End of processing: "19:38:26"

****************************************************************

Thanks in Advance.

Former Member
0 Kudos

Hi,

another alternative is to build a copy of production on another server and run it from there ?

you can either remote client copy itor export it....No down time of your Production system..

It would not take long to setup-up if spare server was available....How big is your System.

Mark

Former Member
0 Kudos

OK, Back to the actual problem !

Have you more than one client in your source system.....?

Because the error intimates that you have...Can these tables be transported to client 400.

Mark

Former Member
0 Kudos

We have folowing client in our Production System

000 SAP AG Walldorf EUR 10.12.2007

001 Auslieferungsmandant R11 Kundstadt USD

066 EarlyWatch Walldorf EUR 21.07.2002

400 Production Kuwait KWD 23.11.2009

.Can these tables be transported to client 400.

This I dont know which table I need to transport and how.

Former Member
0 Kudos

Hi,

Another thought, looking at the tables in one of my ECC6.0 systems, these are empty....

Question is are they empty in yours ? and do toy really need them for this particular exercise.

If they are not needed put them in the exclusion table....

Mark

Answers (2)

Answers (2)

Former Member
0 Kudos

Hi,

For your requirement, you can either do a remote client copy or client export & import. But in both the cases patch levels have to be same in both the systems.

Please confirm if patch levels are same in both the systems.

Regards,

Sharath

Former Member
0 Kudos

Hi,

Are the patch levels of EHP and EHQ are same. Main pre-requisite for client copy is that both the source and target system should be in same patch levels.

Thanks & Regards,

Sharath