on 11-20-2009 4:26 AM
Dear sir
post production inspection and in process inspection for in house production , i have master data like MIC, INSPECTIONPLAN , SELECTED SETS , CODES , CODEGROUPS, But when iam doing results recording , inthis sceen RSULTS colum is appaearing
GRAY, so iam unabale to give results inths screen.
pl tell me how to over come this problem&Wher idone mistake
thanks and results
Baswaraj
Dear Raj
Give us all the detial pertaining to the MIC (control indicators) , Sampling procedure used , Routing ( inspection point )
Regards
Gajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi
ihave qualitetive and quantitetive mic
for QUANTITATIVE CONTROLE INDICATORS
reference chara
LSLIMIT, USLIMIT,Check traget valve,sampling porcedure,single result,requrichar,fixedscope,nodocumentation,Record measured valve,print, noformula, deimalplaces, upper limt , lower limit.
and inspectionmethed.
for qualitative controle indicaotrs
charc attributes,sampling procedure,single result,required cha
inspection methed , catlog , selected set
sampling procedure
100% sampling ,Manval valutaion, freely defined inspectionpoints,
fixed sampling , manual valution, freely inspectionpoints,sampli size 10,inspection frequency 1
%percentage sampling , manual valution, freely inspection points, sampling size 10%,inspection frequency 1
inspectionplan
controle key -PP04, 100 FOR FREELY DEFIND INSPECTION POINTS,NO OVERLAPING, ABOVE SAID MIC AND SAMPLING PROCEDURE ARE ASSINGED IN THE PLAN.
REGARDS
BASWARAJ
Edited by: baswa raj on Nov 20, 2009 11:05 AM
Dear Raj
The default setting should be Single values and summarised results (default)
Regards
Gajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Baswa raj
Seems no issue with master data. Can you kindly check whether any authorisation issue is there. have you simulated this issue in any other client. is it the same issues there
Also check what is the default setting kept in the result recording screen. RR screen > setting> user setting > default values recording view
Regards
Gajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Baswa raj
Please confirm this
1) You are refering to 03 inspection type
2) Double click on the MIC short text in the result recording screen , it will take you to details screen. is the field here also grey
3) Also please check in the routing whether there is any error. There is a check option and if there is any error please let us know
Regards
gajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi
) refering to 03 inspection typeand 04
2) Double click on the MIC short text in the result recording screen , it will take you to details screen. is the field here also grey
not gray ,here ican update all the results
3) Also please check in the routing whether there is any error. There is a check option and if there is any error please let us know
date problem
thanks and regards
Baswaraj
Dear Baswa Raj
1) Please check for authorisation. if this issue is not seen in any other client means the issue lies with authorisation
2) Double click on the MIC short text in the result recording screen , it will take you to details screen. is the field here also grey
Regards
Gajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Baswa raj
What is the screen tab you are getting in the Result recording. is it general, unit inspection , summarised
Kindly let me know
Regards
Gajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
Which T code you are using.?/?
Have you checked for authorization.may be you can check in SU53 after running code.??
Also check that for inspection tyep in QM view have you clicked on "Check char"
Sujit
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi
iam useing qa32 from this iam doing all the process for inspection like results recording, defict recording , stock posting, ud.
in qe51 n also iam faceing same problem , results colum is grey, iam unable to record the results .
check box isalso ticked in inspection type.
thanks and regards
Baswaraj
Please check in Control Indicators of MIC whether you have marked Measured Values indicator or not. It should be marked.
Best Regards,
K. Raghavendra Nayak
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
95 | |
11 | |
11 | |
6 | |
6 | |
4 | |
4 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.