on 11-17-2009 4:49 AM
Dear All,
i am appling SAP_HR patches all prequests are fullfiled as per sapnotes
disp+work level 223
tp level 220
R3trans level 215
Also SPAM/SAINT level 700/35
BASIS ,ABA,AP and BW all are updated one
but at the time of test import of queue with SAPKE60041-SAPKE60045
giving me error like R3TRAUTHABKRS orginal object can not be replaced.
i ignore the error as its hahen many time in test import but at the time of main import it will be ok.
but at the time of IMPORT_PROPER its is giving me error like...
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPKE60044, tp step "I", return code
0008
######################################
Main import
Transport request : SAPKE60044
System : MRD
tp path : tp
Version and release: 372.04.70 700
R3TRAUTHABKRS original object cannot be replaced
Main import
End date and time : 20091117082930
Ended with return code: ===> 8 <===
######################################
what may the reason....
Can any one provide the solution...
Regards
Dik
Edited by: dik on Nov 17, 2009 5:56 AM
thank u
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Dik,
Just select UC mode overwrite originals..then patch wiil overwites the changes which you have made earlier.
And re-import
Regards
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi DIK,
first of all, please think about creating a OSS Message.
The unconditional Mode is as fare as i know only possible in OS Mode using TP directly.
See here http://help.sap.com/saphelp_nw70/helpdata/EN/3d/ad5b814ebc11d182bf0000e829fbfe/content.htm
Edited by: Peter Riedel on Nov 19, 2009 5:07 PM
Hi Dik,
Have you got the screen SPAU/SPDD corrections, at the time of patch applying...
That wil show you the all objects, which you have modified in your system form oringinal.
There you have to take action......anyway can you send us the spam staus of latest patch..what system is showing?
Regards
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
anyway can you send us the spam staus of latest patch..what system is showing?
According to SAPM Queue SAPKE60042 to SAPKE60045
IMPORT PHASE =IMPORT_PROPER
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPKE60044, tp step "I", return code
0008
######################################
REGARDS
Dik
Hi,
Check the object status/corrections you have made im original one(by taking help from ABAPER).
Then change them to original, and restart applying.
Regards
Nick Loy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks for your reply..
Can you tell me the way through which i can know what change and correction had been happen.
As i am getting through Se03 object R3TRAUTHABKARS had been inloved in a devlopment request and that has been released.
in that request abaper introduced authorization check in Zprograms...that's why object R3TRAUTHABKARS comes in to the picture but it is not locked.
only the thing is it had been modified under that request.
When i am checking through SE03 with option Analyze object in transport task/request and using SAPKE60044
finding
all Objects comes into the catageory of standard SAP
while
Object =R3TR AUTH ABKRS
Original = MRD
Packege = ZHR
Layer = ZMRD
Target =MRP
As i am getting we have to change Original as SAP and Packege as Standard SAP packege.
Can any one tell me how should i do...
Regards
Dik
Edited by: dik on Nov 17, 2009 9:22 AM
Dear All,
as in help i am finding some unconditional mode
1: Ignore that this change request was already imported into this system and import everything again.
If you do not set this mode, only objects that have not already been imported successfully are imported again.
· 2: Overwrite originals
· 6: Overwrite repaired objects
· 8: Ignore the restriction resulting from table classifications and import all table entries into specified clients.
please tell me how can i ipmort SAPKE60044 request or whole queue with unconditional mode 2
please tell me the steps...
regards
Dik
Hi Dik,
You are trying to apply in development or production?
checked the stats of R3TRAUTHABKRS?
I mean, it should not lock.
Thanks & Regards,
Nagendra.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear As per log
R3TRAUTHABKRS original object cannot be replaced
Message no. TW103
Diagnosis
An attempt was made to overwrite an original object with an import.
System Response
The object is not imported.
Procedure
If you still want to import the object, repeat the import with
Unconditional Mode 2.
how can i import with unconditional Mode 2
means what is the way to get it....
and when checking logs find ......
Import phase 'IMPORT_PROPER' (17.11.2009, 08:29:02)
Error during executing the tp command 'tp R3I all MRD ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors' , tp output:
This is tp version 372.04.70 (release 700, unicode enabled)
ERROR: stopping on error 8 during MAIN IMPORT
stopping on error 8 during MAIN IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 8
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
This is R3trans.exe version 6.14 (release 700 - 12.06.09 - 15:20:00).
unicode enabled version
2EETW103 "R3TRAUTHABKRS " Original object must not be replaced.
R3trans.exe finished (0008).
Details of the error situation can also be found in the import logs
Interrupt the import due to an error situation (17.11.2009, 08:29:41)
Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (17.11.2009, 08:30:00)
please suggest me...
Edited by: dik on Nov 17, 2009 6:12 AM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
88 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.