SOLMAN_SETUP not working

[Former Member]

Hello,

We installed a IDES Sol Man and I am trying to run tcode SOLMAN_SETUP as per the sol man post config guide.

When I run Solman_setup the web page ( Webdynpro - i guess) opens up and errors out... Can u please help me to put the right handler for this servie ?

Below is the path that comes up in Internet Explorer when I run Solman_setup.

http://hostname.xxx.local:8000/sap/bc/webdynpro/sap/wd_sise_main_app?sap-client=001

1. when i try to go to SICF and right click to test "default_host" (top most node) it errors up as below.

Could not find host or port information

Message no. SHTTP082

Diagnosis

The system could not find any host or port information.

Possible causes are:

The Internet Communication Manager is not active. Use transaction SMICM to check whether the Internet Comunication Manager is active.

The Customizing settings for the host and port assignment are incorrect. Use transactions SMICM and RZ11 to check whether the system settings are correct.

I HAVE CHECKED THE SETTINGS SEEMS TO BE CORRECT.

2. Also when I go to /sap/bc/webdynpro/sap/ and right click to test WD_SISE_MAIN_APP under it , the error comes up as :

Service Cannot Be Accessed !

Message no. SHTTP009

Diagnosis

You have not entered a handler, and the other services in the URL also do not have a handler. This means the service cannot be accessed by HTTP request.

Procedure

Check whether this is intentional, and if necessary, enter a handler"

I DONT KNOW WHAT HANDLER TO USE FOR THIS SERVICE (/sap/bc/webdynpro/sap/WD_SISE_MAIN_APP )

regds

Girish

[former_member369410]

Dears

I also get the same error...

anybody can solve this question>??

[Former Member]

what do you see in the ICM trace?

[Former Member]

Though, if you could let me know what handler has been used in your system it would be great... I feel thats the main problem here.....( p.s. I am not a basis expert.)

1. when I go to /sap/bc/webdynpro/sap/ and right click to test WD_SISE_MAIN_APP under it , the error comes up as :

Service Cannot Be Accessed !

Message no. SHTTP009

Diagnosis

You have not entered a handler, and the other services in the URL also do not have a handler. This means the service cannot be accessed by HTTP request.

Procedure

Check whether this is intentional, and if necessary, enter a handler"

I DONT KNOW WHAT HANDLER TO USE FOR THIS SERVICE (/sap/bc/webdynpro/sap/WD_SISE_MAIN_APP )

FOR NEISMI, I dont know how to do a ICM TRACE, Can you help ?

FOR PHIL, all parameters look fine, below is a copy of the same......

*********************DEAFULT.PFL*******************************

#.******************************************************************************************************************************

#.* *

#.* Default profile DEFAULT *

#.* *

#.* Version = 000001 *

#.* Generated by user = J2EE_ADMIN *

#.* Generated on = 08.09.2009 , 15:23:00 *

#.* *

#.******************************************************************************************************************************

SAPDBHOST = SAPERP6R3-HC

dbms/type = mss

dbs/mss/server = SAPERP6R3-HC

dbs/mss/dbname = KF1

dbs/mss/schema = kf1

j2ee/dbtype = mss

j2ee/dbhost = SAPERP6R3-HC

j2ee/dbname = KF1

SAPSYSTEMNAME = KF1

SAPGLOBALHOST = saperp6r3-hc

SAPFQDN = KINGFISHER.LOCAL

SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)

#----

---

1. SAP Message Server for ABAP

#----

---

rdisp/mshost = saperp6r3-hc

rdisp/msserv = sapmsKF1

rdisp/msserv_internal = 3900

#----

---

1. SAP Central Service Instance for J2EE

#----

---

j2ee/scs/host = saperp6r3-hc

j2ee/scs/system = 01

j2ee/ms/port = 3901

login/system_client = 001

**********************OTHER INSATANCE PROFILES********************

#.******************************************************************************************************************************

#.* *

#.* Instance profile KF1_DVEBMGS00_SAPERP6R3-HC *

#.* *

#.* Version = 000001 *

#.* Generated by user = J2EE_ADMIN *

#.* Generated on = 08.09.2009 , 15:23:00 *

#.* *

#.******************************************************************************************************************************

SAPSYSTEMNAME = KF1

SAPGLOBALHOST = saperp6r3-hc

SAPSYSTEM = 00

INSTANCE_NAME = DVEBMGS00

DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64

DIR_EXECUTABLE = $(DIR_INSTANCE)\exe

jstartup/trimming_properties = off

jstartup/protocol = on

jstartup/vm/home = C:\j2sdk1.4.2_21-x64

jstartup/max_caches = 500

jstartup/release = 700

jstartup/instance_properties = $(jstartup/j2ee_properties);$(jstartup/sdm_properties)

j2ee/dbdriver = $(DIR_EXECUTABLE)\mssjdbc\sqljdbc.jar

rdisp/wp_no_dia = 10

rdisp/wp_no_btc = 3

rdisp/j2ee_start_control = 1

rdisp/j2ee_start = 1

rdisp/j2ee_libpath = $(DIR_EXECUTABLE)

exe/j2ee = $(DIR_EXECUTABLE)\jcontrol$(FT_EXE)

rdisp/j2ee_timeout = 600

rdisp/frfc_fallback = on

icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00

icm/server_port_0 = PROT=HTTP,PORT=80$$

icm/host_name_full = saperp6r3-hc.KINGFISHER.LOCAL

login/no_automatic_user_sapstar = 0

icm/conn_timeout = 20000

icm/keep_alive_timeout = 2400

login/create_SSO2_ticket = 2

login/accept_SSO2_ticket = 1

icm/server_port_1 = PROT=SMTP,PORT= 29999

#----

---

1. SAP Message Server parameters are set in the DEFAULT.PFL

#----

---

ms/server_port_0 = PROT=HTTP,PORT=81$$

rdisp/wp_no_enq = 1

rdisp/wp_no_vb = 1

rdisp/wp_no_vb2 = 1

rdisp/wp_no_spo = 1

#----

---

1. Jcontrol: Migrated Profile Parameter

2. create at Thu Aug 13 16:48:12 2009

#----

---

j2ee/instance_id = ID0028774

#----

---

Regds

Girish

[Former Member]

goto transaction SMICM

Menue / Goto / Trace File / Display All

look for the error

[Former Member]

Neismi,

Here's the trace below, I dont see any error in that, unless you think otherwise. Pls suggest.

-

---

ICM Trace File (dev_icm)

-

---

-

---

trc file: "dev_icm", trc level: 1, release: "701"

-

---

sysno 00

sid KF1

systemid 562 (PC with Windows NT)

relno 7010

patchlevel 0

patchno 25

intno 20020600

make: multithreaded, Unicode, 64 bit, optimized

pid 584

[Thr 1960] started security log to file dev_icm_sec

[Thr 1960] ICM running on: saperp6r3-hc.KINGFISHER.LOCAL

[Thr 1960] MtxInit: 30001 0 2

[Thr 1960] IcmInit: listening to admin port: 64998

[Thr 1960] DpSysAdmExtCreate: ABAP is active

[Thr 1960] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

[Thr 1960] DpShMCreate: sizeof(wp_adm) 29792 (1752)

[Thr 1960] DpShMCreate: sizeof(tm_adm) 5912704 (29416)

[Thr 1960] DpShMCreate: sizeof(wp_ca_adm) 24064 (80)

[Thr 1960] DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

[Thr 1960] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

[Thr 1960] DpShMCreate: sizeof(comm_adm) 552080 (1088)

[Thr 1960] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

[Thr 1960] DpShMCreate: sizeof(slock_adm) 0 (104)

[Thr 1960] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

[Thr 1960] DpShMCreate: sizeof(file_adm) 0 (72)

[Thr 1960] DpShMCreate: sizeof(vmc_adm) 0 (1864)

[Thr 1960] DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)

[Thr 1960] DpShMCreate: sizeof(gw_adm) 48

[Thr 1960] DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000017E0050, size: 6614144)

[Thr 1960] DpShMCreate: allocated sys_adm at 00000000017E0050

[Thr 1960] DpShMCreate: allocated wp_adm at 00000000017E2270

[Thr 1960] DpShMCreate: allocated tm_adm_list at 00000000017E96D0

[Thr 1960] DpShMCreate: allocated tm_adm at 00000000017E9730

[Thr 1960] DpShMCreate: allocated wp_ca_adm at 0000000001D8CFB0

[Thr 1960] DpShMCreate: allocated appc_ca_adm at 0000000001D92DB0

[Thr 1960] DpShMCreate: allocated comm_adm at 0000000001D94CF0

[Thr 1960] DpShMCreate: system runs without slock table

[Thr 1960] DpShMCreate: system runs without file table

[Thr 1960] DpShMCreate: allocated vmc_adm_list at 0000000001E1B980

[Thr 1960] DpShMCreate: allocated gw_adm at 0000000001E1BA00

[Thr 1960] DpShMCreate: system runs without vmc_adm

[Thr 1960] DpShMCreate: allocated ca_info at 0000000001E1BA30

[Thr 2204] Thu Sep 10 09:38:08 2009

[Thr 2204] IcmProxyWatchDog: proxy watchdog started

[Thr 1960] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

[Thr 1960] Thu Sep 10 09:38:09 2009

[Thr 1960] IcmCreateWorkerThreads: created worker thread 0

[Thr 1960] IcmCreateWorkerThreads: created worker thread 1

[Thr 1960] IcmCreateWorkerThreads: created worker thread 2

[Thr 1960] IcmCreateWorkerThreads: created worker thread 3

[Thr 1960] IcmCreateWorkerThreads: created worker thread 4

[Thr 1960] IcmCreateWorkerThreads: created worker thread 5

[Thr 1960] IcmCreateWorkerThreads: created worker thread 6

[Thr 1960] IcmCreateWorkerThreads: created worker thread 7

[Thr 1960] IcmCreateWorkerThreads: created worker thread 8

[Thr 1960] IcmCreateWorkerThreads: created worker thread 9

[Thr 3248] IcmWatchDogThread: watchdog started

[Thr 3252] Thu Sep 10 09:38:10 2009

[Thr 3252] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject no

X.509 cert data will be removed from header [http_plg.c 723]

[Thr 3252] Thu Sep 10 09:38:14 2009

[Thr 3252] ISC: created 400 MB disk cache.

[Thr 3252] ISC: created 50 MB memory cache.

[Thr 3252] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0

[Thr 3252] HttpExtractArchive: files from archive D:\usr\sap\KF1\DVEBMGS00\exe/icmadmin.SAR in directory D:/usr/sap/KF1/DVEBMGS0

[Thr 3252] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0

[Thr 3252] CsiInit(): Initializing the Content Scan Interface

[Thr 3252] PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)

[Thr 3252] CsiInit(): CSA_LIB = "D:\usr\sap\KF1\DVEBMGS00\exe\sapcsa.dll"

[Thr 3252] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0

[Thr 3252] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=3, flags=4101) for /:0

[Thr 3252] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=4, flags=1077253) for /:0

[Thr 3252] Started service 8000 for protocol HTTP on host "saperp6r3-hc.KINGFISHER.LOCAL"(on all adapters) (processing timeout=2

[Thr 3252] Thu Sep 10 09:38:15 2009

[Thr 3252] Started service 29999 for protocol SMTP on host "saperp6r3-hc.KINGFISHER.LOCAL"(on all adapters) (processing timeout=

[Thr 3252] Thu Sep 10 09:38:19 2009

[Thr 3252] IcmNetCheck: network check passed without detecting problems

[Thr 1960] Thu Sep 10 09:39:50 2009

[Thr 1960] HttpSAPR3SetParam: switch j2ee http port from to: 50000

[Thr 1960] HttpSAPR3SetParam: switch j2ee https port from to: 50001

[Thr 1960] Thu Sep 10 09:41:31 2009

[Thr 1960] HttpSAPR3SetParam: Switched j2ee status to: 1

[Former Member]

Hi Girish,

did you solve this problem?

I am getting the same error.. could you please tell how did you solve it?

Regards,

Tripti

[Former Member]

Hi, Girish,

I saw this sometime back, and I'm trying to remember the cause. Have you verified that the following profile parameters are set?

a. icm/host_name_full = <fully.qualified.hostname>

b. icm/keep_alive_timeout = 600 (note 824554)

c. login/accept_sso2_ticket = 1

d. login/create_sso2_ticket = 2

e. ict/exclude_compression =.zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh, .cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.g, *.pdf, *.ppd, *.pddx

Also, check strust and sso2 for single sign on.

=============================

Here is what the IMG Activity says:

=============================

Maintain Profile Parameters

Use

You create profile parameters in the instance profiles per application server for:

Single Sign-On (SSO)

Business Server Pages (BSP)

Timeout for ICF Services

Requirements

You have set up SSO, see also:

SAP Note 817529: Checking the SSO Configuration

Installation Guide and Security Guide for SAP Solution Manager

You have imported the respective instance profiles. Proceed as follows:

1. Choose the respective instance profile.

2. Choose Import.

Activities

Create the following profile parameters in the instance profile:

login/create_sso2_ticket = 2

login/accept_sso2_ticket = 1

icm/host_name_full = fully qualified server name

This parameter must be attributed to the fully qualified server name (for example, wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.

icm/server_port_1 = PROT=SMTP,PORT= <> 0 for example, 25000

login/no_automatic_user_sapstar = 0

icm/conn_timeout for example, 20000

icm/keep_alive_timeout for example, 240

icm/server_port_< n >

You can set the ICM parameters for timeout permanently as profile parameters or via the transaction SMICM (Edit -> Service). Note here: These changes are lost when you restart the ICM. See also SAP Note 824554 (ICM and SAP Web Dispatcher Timeout Parameter)

SAPLOCALHOSTFULL = fully qualified server name

For the parameters to be used by the system, the system must be restarted.

These are from some of my documentation as steps prior to running Solman_setup.

Hope it helps.

Phillip