on 08-07-2009 8:20 AM
Hi Guys,
I have a requirement in which I need to create alternate sequence in R/3 in the routing alongwith std sequence
and cif it to APO and to get a PPM with two modes one with std sequence and another with alternate
sequence.
I maintained accordingly and ciffed also. But I got a ppm with only one mode.
Could anyone worked on this scenario. Could you please help which setting i am missing.
Thanks & Regards
R. Senthil Mareeswaran.
Hi R. Senthil Mareeswaran
You might already have it but just in case: note 217210 might help you.
Check also if 607009 is implemented
I hope it will help.
Thanks and Regards
Julien
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Senthil,
I just implemented modes to APO by giving classes and certain characteristics to resources and operations.
I used this guide for it, I hope it helps you clarify your problem.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4093ff85-d7df-2b10-8b82-bd054bc88839
Regards,
Fernando
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Thanks to all hands who helped.
I checked all settings which you were suggested and everything looks ok.
Now my abapper is in debugging mode.
I have a quick question to ritesh. Ritesh you have suggested to use
branch and return operation as 20 & 30 wherein i used 020 & 020
What difference will it make? could you please ellaborate?
Regards
R. Senthil Mareeswaran.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Senthil,
You can transfer alternate sequence as alternate modes only through a use of Enhancement used in PPM. You activate 'EXIT_SAPLPGS1_001 " of the SAP enhancement CIFPPM01 in ECC.
Also refer note no 217210 - Mapping of alternate sequences in APO
This will mostly resolve your problem.
Kindly revert back in any case.
Thanks & Regards,
Sujeet Kulkarni
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Julien / RSD / Others,
Awaiting for your answer. Please help.
Regards
R. Senthil Mareeswaran.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Senthil,
You can transfer alternate sequence as alternate modes only through a use of Enhancement used in PPM. You activate 'EXIT_SAPLPGS1_001 " of the SAP enhancement CIFPPM01 in ECC.
Also refer note no 217210 - Mapping of alternate sequences in APO
This will mostly resolve your problem.
Kindly revert back in any case.
Thanks & Regards,
Sujeet Kulkarni
Hi Julien & R S D,
Thanks for your efforts in answering my question.
I checked the settings proposed by you and everything looks alright.
I have a doubt in maintaining the alt sequence.
ie I have a std sequence in my routing with operation nos 10, 20, 30,40 & 50
containing resources R1, R2, R3,R1,R2 respectively. In alt sequence, I have
branch operation defined as 0020, return operation defined as 0020 and I
maintained operation only 20 in alt sequence with resource R4.
Is the above settings ok or any change in set up required. With this setting,
if i run consistency check in CFM1, it is giivng warning message that
the alt sequence is not transferred, CFM2 job completed without any errors
but the second mode did not get generate.
Please help.
Regards
R. Senthil Mareeswaran.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi R. Senthil Mareeswaran,
Just try to increase operation in alternate sequence like add one more 0030 with resource R5 and give branch operation 0020 and return operation 0030.
give it a try and revert back.
please also check the production version consistance in materl master.
Sorry couldnt help you much as i dont have system in front of me to test the scnerio.
Regards
Ritesh
Hi Julien,
Thanks for your quick response.
I already implemented these notes at my end but still getting the error.
1) During CFM1, if I do consistency check, it is giving warning message that
"the alternate sequence is not transferred". but when I run CFM2, the
run is successful but the second mode is not generated. Please help.
2) In the note, there is also one instruction that " The operation must be
apo relevant which have a control key relevant to scheduling". Could
you/someone please explain in which transaction and under which tab/field
do I need maintain the operation as APO relevant. Please help
Regards
R. Senthil Mareeswaran.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi again
To make the operation APO relevant you just need to ensure the controle key, in your operation is lfag as relevant for scheduling (CA01 -> operation > field control key > use F4 to display the setting and you will see if your controle key is relevant for scheduling.)
You also need to assign a work center to your operation (the the work center nheed to be CIF beforehand)
So there is not as such a APO relevant flag there..
Now you can check if the operation have a correct control key, if it is assigned to a wrok center, and if your work center has been CIfed... If all of this is done... then I am clueless
Good luck
Julien
Hi again again
Last point: I found another info:
"The number of APO-relevant operations in the master sequence must be identical to the number of APO-relevant operations in the alternative sequences."
i.e: check that both the master and alternative sequence have the same number of APO-relevant operation (see above!)
And some notes, but I guess those will not help you much...
357178
315039
864351
451403
363446
Cheers
Julien
User | Count |
---|---|
7 | |
4 | |
3 | |
2 | |
2 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.