Where to get the kernel 51019680 for linux 32?

[Former Member]

When i installing the IDES on RHEL3 32BIT , it warns me that the directory /KERNEL/UNIX/LINUX_32 doesn't exists

, and i check it again , i found the file SAPEXE.SAR OCLXXXX.SAR is really loss .

Where can i download the related files?

I can find some kernel file which like "SAP Kernel 6.40" under http://service.sap.com/swdc , but i am not sure

i can use it to instead of the lost one (51019680's correspondence is 6.2) .

Edited by: ivan yang g on Jul 14, 2009 11:24 AM

[Former Member]

Hi

At which phase of installation you are getting this error?is your SAP system up ? check the status of your SAP at SAPMMC

Regards

Uday

[Former Member]

Hi

ERROR <DATE> <TIME>
FRF-00007 Unable to open RFC connection.

ERROR <DATE> <TIME> FRF-00063 RFC logon failed with message: Connect to SAP gateway failedConnect_PM
 GWHOST=mumin, GWSERV=sapgw00, ASHOST=mumin, SYSNR=00
ERROR <DATE> <TIME>
FJS-00012 Error when executing script.

It happens when you dont have sufficent workprocess to process the request or all the workprocess are busy cross check the same and increase it and continue the installation

Regards

Uday

[Former Member]

OK. Sorry , how can I check if there have sufficent workprocess ? And how to increase ?

And I found many guest also have the same question .

Ref:

http://sap.ittoolbox.com/groups/technical-functional/sap-basis/frf00007-unable-to-open-rfc-connectio...

But most of them have no answer.

Someone said update the kernel will solve it? Is that ture? If yes , would some one tell me the download link or path?

Now my installed kernel pack is 51019641.

Thank you

Ivan Yang

[Former Member]

Following is the conntent of startsap_DVEBMGS00.log

...

Running /usr/sap/DEV/SYS/exe/run/startdb

/usr/sap/DEV/SYS/exe/run/startdb completed successfully

Checking DEV Database

-

---

Database is running

Starting SAP Instance

-

---

SAP-R/3-Startup Program V1.7 (92/10/21)

-

---

Starting at 2020/10/11 05:49:46

Startup Profile: "/usr/sap/DEV/SYS/profile/START_DVEBMGS00_dbserver"

...

Starting Programs

-

---

(13642) Starting: local ms.sapDEV_DVEBMGS00 pf=/usr/sap/DEV/SYS/profile/DEV_DVEBMGS00_dbserver

(13643) Starting: local dw.sapDEV_DVEBMGS00 pf=/usr/sap/DEV/SYS/profile/DEV_DVEBMGS00_dbserver

(13646) Starting: local co.sapDEV_DVEBMGS00 -F pf=/usr/sap/DEV/SYS/profile/DEV_DVEBMGS00_dbserver

(13647) Starting: local se.sapDEV_DVEBMGS00 -F pf=/usr/sap/DEV/SYS/profile/DEV_DVEBMGS00_dbserver

(13632) Waiting for Child Processes to terminate.

Instance on host dbserver started

(13632) **** 2020/10/11 05:50:29 Child 13643 terminated with Status 0 . ****

[Former Member]

Following is the content of dev_rfc.trc.

T:16384 ======> Connect to SAP gateway failed

Connect_PM GWHOST=dbserver, GWSERV=sapgw00, ASHOST=dbserver, SYSNR=00

LOCATION CPIC (TCP/IP) on local host

ERROR connection to partner broken

TIME Sun Oct 11 05:12:53 2020

RELEASE 620

COMPONENT NI (network interface)

VERSION 36

RC -6

MODULE niuxi_mt.c

LINE 1237

DETAIL NiPRead (0.0.0.0/0)

SYSTEM CALL recv

ERRNO 104

ERRNO TEXT Connection reset by peer

COUNTER 24

[hannes_kuehnemund]

Check dev_rd or dev_rd.old. Iit is the logfile for the gateway. It should tell you what is going wrong with the gateway

Thanks,

Hannes

[Former Member]

Following is the content of dev_rd:

Sun Oct 11 05:49:47 2020

***LOG S00=> GwInitReader, gateway started ( 13648) [gwxxrd.c 1577]

relno 6200

patchlevel 0

patchno 652

intno 20020600

pid 13648

CCMS: Initalizing shared memory of size 20000000 for monitoring segment.

Bind service sapgw00 to datagramm port 3300

Bind service sapgw00 (normal) to port 3300

GwPrintMyHostAddr: my host addresses are :

1 : [192.168.0.55] dbserver (HOSTNAME)

2 : [127.0.0.1] localhost (LOCALHOST)

MtxInit: -2 0 0

Sun Oct 11 05:49:48 2020

DpShMCreate: sizeof(wp_adm) 12160 (760)

DpShMCreate: sizeof(tm_adm) 1694032 (8428)

DpShMCreate: sizeof(wp_ca_adm) 22800 (76)

DpShMCreate: sizeof(appc_ca_adm) 7600 (76)

DpShMCreate: sizeof(comm_adm) 192000 (384)

DpShMCreate: sizeof(wall_adm) (22440/34344/72/100)

DpShMCreate: SHM_DP_ADM_KEY (addr: 0xb3238000, size: 1986848)

DpShMCreate: allocated sys_adm at 0xb3238000

DpShMCreate: allocated wp_adm at 0xb3238530

DpShMCreate: allocated tm_adm_list at 0xb323b4b0

DpShMCreate: allocated tm_adm at 0xb323b4d8

DpShMCreate: allocated appc_ca_adm at 0xb33de738

DpShMCreate: allocated comm_adm_list at 0xb33e04e8

DpShMCreate: allocated comm_adm at 0xb33e0500

DpShMCreate: allocated ca_info at 0xb340f300

Sun Oct 11 05:50:28 2020

caught SIGINT (2)

***LOG S30=> GwStopGateway, gateway stopped () |gwxxrd.c 12424|

Ivan Yang

[markus_doehr2]

Please post dev_w0

Markus

[Former Member]

Following is the contend of dev_w0:(PART1)

-

---

trc file: "dev_w0", trc level: 1, release: "620"

-

---

*

• ACTIVE TRACE LEVEL 1

• ACTIVE TRACE COMPONENTS all, M

*

M

M Sun Oct 11 03:45:16 2020

M systemid 387 (Intel x86 with Linux)

M relno 6200

M patchlevel 0

M patchno 674

M intno 20020600

M pid 3976

M

M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 3976) [thxxhead.c 988]

M calling db_connect ...

C Got ORACLE_HOME=/oracle/DEV/920_32 from environment

C Client NLS settings: AMERICAN_AMERICA.WE8DEC

C Logon as OPS$-user to get SAPDEV's password

C Connecting as /@DEV on connection 0 ...

C Attaching to DB Server DEV (con_hdl=0,svchp=0xa7048e0,svrhp=0xa704724)

C

C Sun Oct 11 03:45:17 2020

C Starting user session (con_hdl=0,svchp=0xa7048e0,srvhp=0xa704724,usrhp=0xa742814)

C Now I'm connected to ORACLE

C Got SAPDEV's password from table SAPUSER

C Got SAPDEV's password from OPS$-user

C Disconnecting from connection 0 ...

C Closing user session (con_hdl=0,svchp=0xa7048e0,usrhp=0xa742814)

C Now I'm disconnected from ORACLE

C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...

C Starting user session (con_hdl=0,svchp=0xa7048e0,srvhp=0xa704724,usrhp=0xa742814)

C Now I'm connected to ORACLE

C Database NLS settings: AMERICAN_AMERICA.WE8DEC

C Database instance DEV is running on dbserver with ORACLE version 9.2.0.7.0 since 20201011

B Connection 0 opened

B Wp Hdl ConName ConId ConState TX PRM RCT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 20201011 034516 dbserver

M db_connect o.k.

[Former Member]

dev_w0(PART2):

I

I Sun Oct 11 03:45:34 2020

I MtxInit: 0 0 0

X EmInit: MmSetImplementation( 2 ).

X <ES> client 0 initializing ....

X Using implementation map

X ES initialized.

B db_con_shm_ini: WP_ID = 0, WP_CNT = 16

B dbtbxbuf: Buffer TABL (addr: 0xb3e29088, size: 30000000, end: 0xb5ac5408)

I *** ERROR => shmget(10033,0,480) (0: Success) [shmux.c 1873]

B dbtbxbuf: Shm Segment 33: Cannot create/attach

B ***LOG BBB=> ADM message TBX buffer: function shmcreate1 returns RC = 2 [dbtbxbuf#9 @ 1388] [dbtbxbuf1388 ]

B ***LOG BZL=> internal error in table buffer: table buf init fail [dbtbxbuf#9 @ 1647] [dbtbxbuf1647 ]

B dbtbxbuf: return code (sap_rc): 2, Buffer TBX_SINGLE will not be available

B db_tbpinit failed

M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]

M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1656]

M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1159]

M in_ThErrHandle: 1

M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 8437]

M

M Info for wp 0

M

M stat = 4

M reqtype = 1

M act_reqtype = -1

M tid = -1

M mode = 255

M len = -1

M rq_id = -1

M rq_source = 255

M last_tid = 0

M last_mode = 0

M rfc_req = 0

M report = > <

M action = 0

M tab_name = > <

M Entering TH_CALLHOOKS

M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP

M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]

M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]

M Entering ThSetStatError

M Entering ThReadDetachMode

M call ThrShutDown (1)...

M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3976) [dpuxtool.c 281]

Ivan Yang

[hannes_kuehnemund]

Ivan,

I *** ERROR => shmget(10033,0,480) (0: Success) http://shmux.c 1873
B dbtbxbuf: Shm Segment 33: Cannot create/attach

says, that the SAP shared memory segment 33 cannot be created. According to SAP note 33873, shared memory segment 33 is:

33: ES-Semaphore            (memory management, extended segm. admin)

So please give your memory parameters from your DVEBMGS00 and DEFAULT profile.

Thanks,

Hannes

[Former Member]

DEV_DVEBMGS00_dbserver:

SAPSYSTEMNAME=DEV

INSTANCE_NAME=DVEBMGS00

SAPSYSTEM=00

rdisp/wp_no_dia=6

rdisp/wp_no_btc=2

rdisp/wp_no_vb=4

rdisp/wp_no_vb2=2

rdisp/wp_no_enq=1

rdisp/wp_no_spo=1

DIR_TRANS=/usr/sap/trans

icm/server_port_0=PROT=HTTP,PORT=8000,EXTBIND=1

DIR_ORAHOME=/oracle/DEV/920_32

ipc/shm_psize_10=66000000

ipc/shm_psize_40=68000000

DEFAULT.PFL:

SAPSYSTEMNAME=DEV

SAPDBHOST=dbserver

rdisp/mshost=dbserver

rdisp/sna_gateway=dbserver

rdisp/sna_gw_service=sapgw00

rslg/collect_daemon/listen_port=3900

rslg/collect_daemon/talk_port=4000

rdisp/bufrefmode=sendoff,exeauto

ms/http_port=8100

ldap/autoregister=1

ldap/saprdn=

ldap/options=DirType=NT5ADS

dbs/ora/tnsnames=DEV

DIR_CLIENT_ORAHOME=/oracle/DEV/920_32

DIR_SERVER_ORAHOME=/oracle/DEV/920_32

Thank you

Ivan Yang

[hannes_kuehnemund]

Thanks.

As I do not have any 32-bit systems at hand, there are maybe some out there at some SDN users? They might give you assistance how to configure

es/implementation

em/max_size_MB

PHYS_MEMSIZE

any one in the forum, using 32bit who can assist

Thanks,

Hannes

[Former Member]

Solved!

Download the kernel patch(51030021) and upgrade my kernel files, restart sap. Continue installation is OK now.

Thank you everyone!

Ivan Yang

[Former Member]

Hi

You can use any of the below Kernel based on your platform

51030764_8 SAP Kernel (U) 6.40 Oracle LINUX_32 Info 151908 22.12.2004

51030764_9 SAP Kernel (U) 6.40 Oracle LINUXIA64_64 Info 183152 22.12.2004

btw what is that you are trying to install ?

Regards

uday

[markus_doehr2]

> 51030764_8 SAP Kernel (U) 6.40 Oracle LINUX_32 Info 151908 22.12.2004

> 51030764_9 SAP Kernel (U) 6.40 Oracle LINUXIA64_64 Info 183152 22.12.2004

Linux IA64 and Linux 32bit are not compatible

Markus

[markus_doehr2]

> When i installing the IDES on RHEL3 32BIT , it warns me that the directory /KERNEL/UNIX/LINUX_32 doesn't exists

What are you trying to install? Redhat 3.x is VERY old.

> , and i check it again , i found the file SAPEXE.SAR OCLXXXX.SAR is really loss .

> Where can i download the related files?

Again - what are you trying to install?

Markus

[Former Member]

Yes , I am using the Redhat 3.

And I am trying to install IDES 4.7.

Ivan Yang

Edited by: ivan yang g on Jul 14, 2009 2:46 PM

Edited by: ivan yang g on Jul 14, 2009 2:47 PM

[markus_doehr2]

And what are you installing? ERP? R/3 4.7? CRM?

Redhat 3 is very old.

Check

Note 171356 - SAP software on Linux: Essential information

Markus

[Former Member]

IDES R/3 4.7

Ivan Yang

[markus_doehr2]

http://service.sap.com/installations

--> Installations and Upgrades - Entry by Application Group

--> SAP Application Components

--> SAP R/3 ENTERPRISE

--> SAP R/3 ENTERPRISE 47X200

--> IDES-Version

--> Linux

Markus

[Former Member]

Thank you Markus Doehr.

I have download the related files , and i will reinstall the IDES later to check them work or not.

Ivan Yang

[Former Member]

After i down load related files and go on installation .

But to the step 'Extract Database Server Archives' while installing DB instance , it prompts that

See '. /CROCLLNK -v -b 32' output in 'crocllnk.log'.

ERROR <date> <time>

MOS-01012 PROBLEM: '. /CROCLLNK -v -b 32' returned with '1' which is not a defined as a success code.

ERROR <date> <time>

FJS-00012 Error when executing script."

And then i vi the the file crocllnk.log , it's written that 'The oracle installation in /oracle/DEV/920_32 is not valid --- abort....'.

How can I solve that?

Ivan Yang

Edited by: ivan yang g on Jul 16, 2009 3:57 PM

[markus_doehr2]

> And then i vi the the file crocllnk.log , it's written that 'The oracle installation in /oracle/DEV/920_32 is not valid --- abort....'.

> How can I solve that?

What's the complete content of that file?

Markus

[Former Member]

Just 'The oracle installation in /oracle/DEV/920_32 is not valid --- abort....'.

Not any more.

Ivan Yang

[markus_doehr2]

How did you install the database?

What patchlevel are you running?

Markus

[Former Member]

I have ever install an oracle to another directory ever before, but I unmount that directory before installation

, and my system do not call the mount oracle database instance any more while booting up.

So I expected my system will be install under an environment which havn't install oracle .

And I use the file 'ORACLE 9.2 rdbms 1' , 'ORACLE 9.2 rdbms 2' , 'ORACLE 9.2 rdbms 3' for this installation .

Ivan Yang

[markus_doehr2]

What I mean is:

Did you install Oracle according to the installation documentation? Is the mentioned PATH your ORACLE_HOME?

Markus

[Former Member]

May be I kown why this occurs , I check the installtion guide(I_UX_ORA2.PDF) .

I found that havn't done the '5.5.2 Installing the Oracle 9.2.0 Database Software'. So I will redo it.

Ivan Yang

[Former Member]

Pop up error like that at step 'Strating RFC Jobs(Post processing)'

ERROR <DATE> <TIME>

FRF-00007 Unable to open RFC connection.

ERROR <DATE> <TIME> FRF-00063 RFC logon failed with message: Connect to SAP gateway failedConnect_PM GWHOST=mumin, GWSERV=sapgw00, ASHOST=mumin, SYSNR=00

ERROR <DATE> <TIME>

FJS-00012 Error when executing script.

How to solve it?

Ivan Yang