Post Processing after Changing SID

[Former Member]

Hi,

After following the procedure in:

I am able to start msg_server but stuck with the follwing with Java still not starting up.

I wonder about Java instance ID, what happens with the instance ID if the above procedure is followed. I have carefully changed configurations, settings...and am able to logon on ABAP side...but Java being down I cannot release the system properly.

Please advise asto what is still missing in corelation with changing SID in such a way.

-

---

trc file: "dev_disp", trc level: 1, release: "700"

-

---

sysno 01

sid C7Q

systemid 562 (PC with Windows NT)

relno 7000

patchlevel 0

patchno 185

intno 20050900

make: multithreaded, Unicode, 64 bit, optimized

pid 5856

Sun May 24 13:05:07 2009

kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)

length of sys_adm_ext is 576 bytes

• SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (01 5856) [dpxxdisp.c 1285]

shared lib "dw_xml.dll" version 185 successfully loaded

shared lib "dw_xtc.dll" version 185 successfully loaded

shared lib "dw_stl.dll" version 185 successfully loaded

shared lib "dw_gui.dll" version 185 successfully loaded

shared lib "dw_mdm.dll" version 185 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3901

Sun May 24 13:05:11 2009

• WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is active

DpIPCInit2: start server >UT1VC7Q01_C7Q_01 <

DpShMCreate: sizeof(wp_adm) 59568 (1752)

DpShMCreate: sizeof(tm_adm) 58861440 (29416)

DpShMCreate: sizeof(wp_ca_adm) 80000 (80)

DpShMCreate: sizeof(appc_ca_adm) 160000 (80)

DpCommTableSize: max/headSize/ftSize/tableSize=4000/16/4416064/4416080

DpShMCreate: sizeof(comm_adm) 4416080 (1088)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064

DpShMCreate: sizeof(slock_adm) 156064 (104)

DpFileTableSize: max/headSize/ftSize/tableSize=6600/16/633664/633680

DpShMCreate: sizeof(file_adm) 633680 (72)

DpShMCreate: sizeof(vmc_adm) 61520 (1864)

DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0B0050, size: 65199728)

DpShMCreate: allocated sys_adm at 000000000F0B0050

DpShMCreate: allocated wp_adm at 000000000F0B21F0

DpShMCreate: allocated tm_adm_list at 000000000F0C0AA0

DpShMCreate: allocated tm_adm at 000000000F0C0B00

DpShMCreate: allocated wp_ca_adm at 00000000128E3280

DpShMCreate: allocated appc_ca_adm at 00000000128F6B00

DpShMCreate: allocated comm_adm at 000000001291DC00

DpShMCreate: allocated slock_adm at 0000000012D53E50

DpShMCreate: allocated file_adm at 0000000012D79FF0

DpShMCreate: allocated vmc_adm_list at 0000000012E14B40

DpShMCreate: allocated gw_adm at 0000000012E14BC0

DpShMCreate: allocated vmc_adm at 0000000012E14BF0

DpShMCreate: allocated ca_info at 0000000012E23C40

DpShMCreate: allocated wall_adm at 0000000012E23C50

Sun May 24 13:05:12 2009

MBUF state OFF

DpCommInitTable: init table for 4000 entries

DpFileInitTable: init table for 6600 entries

Sun May 24 13:05:13 2009

DpSesCreateTable: created session table at 0000000018FD0050 (len=1434432)

rdisp/queue_size_check_value : -> off

ThTaskStatus: rdisp/reset_online_during_debug 0

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 4096 kByte.

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 511 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 96 MB

DpVmcInit2: o.k.

Sun May 24 13:05:14 2009

J2EE server info

start = TRUE

state = STARTED

pid = 5088

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=65000

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Sun May 24 13:05:15 2009

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]

***LOG Q0K=> DpMsAttach, mscon ( UT1VC7Q01) [dpxxdisp.c 12429]

DpStartStopMsg: send start message (myname is >UT1VC7Q01_C7Q_01 <)

DpStartStopMsg: start msg sent

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

Sun May 24 13:05:16 2009

CCMS: Initalizing shared memory of size 60000000 for monitoring segment.

Sun May 24 13:05:22 2009

CCMS: Checking Downtime Configuration of Monitoring Segment.

Sun May 24 13:05:23 2009

CCMS: start to initalize 3.X shared alert area (first segment).

DpMsgAdmin: Set release to 7000, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]

DpMsgAdmin: Set patchno for this platform to 185

Release check o.K.

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:06:36 2009

MBUF state ACTIVE

Sun May 24 13:06:37 2009

DpModState: change server state from STARTING to ACTIVE

Sun May 24 13:08:31 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 4 / sock 104

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1619) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5088)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

[Former Member]

This is the link to the procedure that I followed:

[;

Edited by: One Idea on May 24, 2009 9:23 PM

[Former Member]

Remainder of the log:

Sun May 24 13:08:35 2009

J2EE server info

start = TRUE

state = STARTED

pid = 3016

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64999

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Sun May 24 13:08:37 2009

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:08:55 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 6 / sock 44

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1780) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:09:15 2009

J2EE server info

start = TRUE

state = STARTED

pid = 4904

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64998

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:09:28 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 4 / sock 40

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1792) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4904)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:09:35 2009

J2EE server info

start = TRUE

state = STARTED

pid = 4640

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64997

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Sun May 24 13:09:36 2009

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:09:45 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1802) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4640)

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:09:55 2009

J2EE server info

start = TRUE

state = STARTED

pid = 5920

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64996

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:10:03 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 4 / sock 32

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1810) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5920)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:10:15 2009

J2EE server info

start = TRUE

state = STARTED

pid = 2728

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64995

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:10:23 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 6 / sock 28

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1816) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2728)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:10:35 2009

J2EE server info

start = TRUE

state = STARTED

pid = 3192

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64994

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Sun May 24 13:10:37 2009

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:11:04 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 4 / sock 20

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1824) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3192)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:11:15 2009

J2EE server info

start = TRUE

state = STARTED

pid = 4976

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64993

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:11:27 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1836) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4976)

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:11:35 2009

J2EE server info

start = TRUE

state = STARTED

pid = 5500

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64992

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:11:45 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 4 / sock 16

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1851) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5500)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:11:55 2009

J2EE server info

start = TRUE

state = STARTED

pid = 4304

argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64991

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=C7Q

argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01

argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

DpJ2eeLogin: j2ee state = CONNECTED

Sun May 24 13:12:02 2009

***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]

• ERROR => NiIRead: SiRecv failed for hdl 6 / sock 12

(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1857) [nixxi.cpp 4424]

DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4304)

• ERROR => DpProcKill: kill failed [dpntdisp.c 371]

DpIJ2eeShutdown: j2ee state = SHUTDOWN

Sun May 24 13:12:15 2009

DpEnvCheckJ2ee: switch off j2ee start flag

Thank you for your help and time in advance.